• Fisheries and Aquatic Sciences
• /
• v.8 no.3
• /
• pp.142-150
• /
• 2005

The effects of photoperiod, temperature, and fish size on oxygen consumption (OC) in the black porgy Acanthopagrus schlegeli, a euryhaline marine teleost, were studied using a closed recirculating seawater system with a respiratory chamber. Fish reared in indoor recirculating seawater tanks were divided into two groups: small (15.7-55.8 g, mean 38.1$\pm$15.9 g) and large (108.7-238.8 g, mean 181.8$\pm$54.9 g) fish. The OC of the fish showed a clear diel rhythm, with higher values in the daytime and lower values at night, in accordance with light (09:00-20:59 h) and dark (21:00-08:59 h) cycles. The OC of the fish increased linearly with the water temperature. The OC was the highest at 10:00 h, one hour after the onset of daylight and was the lowest at 03:00 h, six hours after dusk. The average OC at $20^{\circ}C$ during the light period was as high as 219.8 mg $O_2$/kg/h in the small fish and 156.3 mg $O_2$/kg/h in the large fish, while during the dark period it was as low as 130.5 and 110.4 mg $O_2$/kg/h, respectively. The OC during the dark period, which showed limited variation, could be regarded as the resting OC, and was 107.6, 130.5, and 219.8 mg $O_2$/kg/h at 15, 20, and $25^{\circ}C$, respectively, in small fish, and 52.3, 110.4, and 171.0 mg $O_2$/kg/h in large fish. As the body weight of black porgy increased, the OC decreased exponentially and the relationship was expressed as OC=1,222.8$BW^{-0.567}$, OC=1,113.2$BW^{-0.448}$, and OC=1,495.3$BW^{-0.468}$ at 15, 20, and $25^{\circ}C$, respectively. At a fish density of 14.5 g/L at $20^{\circ}C$, black porgy had the highest OC per breath compared to fish at the same density at 15 or $25^{\circ}C$. This suggests that the black porgy responds to the stocking density (15 kg/$m^3$) and water temperature ($20^{\circ}C$) conditions commonly observed in intensive aquaculture with the deepest breath and the highest metabolic activity.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.434-442
• /
• 2015

The process of cultivation and production of oak mushroom (Lentinula edodes (Berk.) Pegler) on sawdust surface beds were investigated. Sawdust surface bed cultivation is the method by which oak mushrooms are cultured and produced on sterilized sawdust surface bed without using bags. The bed was made by inoculating with 3 to 1 ratio of bed sawdust to oak mushroom mycelial inoculum. The sawdust bed medium with 65% water content was pasteurized at $65^{\circ}C$, inoculated with sawdust spawn and spread on the surface on vinyl film in cultivation shed. During 78 days of cultivation period, water content in the medium varied from 61 to 72%, its pH decreased from 5.6 to 3.9~4.6 and ergosterol concentration increased to $0.33{\sim}0.59{\mu}g/g$. $CO_2$ concentration in the medium rapidly increased to 8.06% in two weeks. In seven weeks the medium surface started browning and $CO_2$ concentration increased to about 5.63%. Until 11th week the $CO_2$ concentration was maintained at 6~7%. After removing the plastic cover on the bed for ventilation in 12 weeks, $CO_2$ within the bed reduced dramatically to 1.5%. In the cultivation shed the internal temperature was $7.1{\sim}29^{\circ}C$ and humidity was 27.3 to 100%, while bed temperature ranged $11.6{\sim}30^{\circ}C$. Oak mushroom fruiting started from late July, in 120 days after bed establishment in late March and continued for approximately 100 days until early December with eight cycles of irrigation treatment. The mushroom yield of the eight cycles were 288~352 kg during the 1st (7/29~8/4) to 3rd cycle (9/3~9/7), 800 kg at the 4th cycle (9/19~9/24), 1,296~1,853 kg during 5th (10/3~10/8) to 7th cycle (4.11~11/9) and 990 kg at 8th cycle (11/23~12/7). Total production was approximately 7.4 tons from 33.0 tons of oak sawdust medium, thus harvest efficiency of the mushroom production was approximately 22.4%.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1078-1086
• /
• 1996

The peroxo-polytungstic acid was formed by the direct reaction of tungsten powder with the hydrogen peroxide solution. Peroxo-polytungstic powder were prepared by rotary evaporator using the fabricated on to ITO coated glass as substrate by dip-coating method using $2g/10mL(W-IPA/H_2O)$ sol solution. A substrate was dipped into the sol solution and after a meniscus had settled, the substrate was withdrawn at a constant rate of the 3mm/sec. Thicker layer could be built up by repeated dipping/post-treatment 15 times cycles. The layers dried at the temperature of $65{\sim}70^{\circ}C$ during the withdrawn process, and then tungsten oxides thin film was formed by final heating treatment at the temperature of $230{\sim}240^{\circ}C$ for 30min. A linear rotation between the thickness of thin film and the number of dipping/post-treatment cycles for tungsten oxides thin films made by dip-coating was found. The thickness of thin film had $60{\AA}$ after one dipping. From the patterns of XRD, the structure of tungsten oxides thin film identified as amorphous one and from the photographs of SEM, the defects and the moderate cracks were observed on the tungsten oxides thin film, but the homogeneous surface of thin films were mostly appeared. The electrochemical characteristic of the $ITO/WO_3$ thin film electrode were confirmed by the cyclic voltammetry and the cathodic Tafel polaization method. The coloring bleaching processes were clearly repeated up to several hundreds cycles by multiple cyclic voltammetry, but the dissolved phenomenon of thin film revealed in $H_2SO_4$ solution was observed due to the decrease of the current densities. The diffusion coefficient was calculated from irreversible Randles-Sevick equation from the data obtained by the cyclic voltammetry with various scan rates.

• Journal of the korean society of oceanography
• /
• v.32 no.2
• /
• pp.63-68
• /
• 1997

Stable isotope profiles with fine-scale resolution were constructed from the fossil mollusk shells, Mercernaria mercernaria, obtained from the late Pleistocene transgressive deposits of Gomez Pit, Virginia, USA. Incremental sampling were made along the axis of maximum growth to provide high-resolution ${\delta}^{18}$O and ${\delta}^{13}$C records. The ${\delta}^{18}$O shell profiles exhibit a series of pronounced cycles in the overall amplitude, corresponding to strong seasonal variations in temperature, which is apparently positive environmental variable. Contrasts between the patterns of ${\delta}^{18}$O and ${\delta}^{13}$C profiles reflect the relationship influencing the seasonal carbon cycling in the shallow marine environment. Positive anomalies of the ${\delta}^{13}$C values during the summer were observed to be out of phase with the ${\delta}^{18}$O profile. Such relatively heavier carbon source may be alternated due to seasonal methanogenesis during the summer. A hypothesized methane-based system may be operated in the shallow and marginal marine environment, resulting in a ${\delta}^{13}$C enriched bicarbonate pool, in which the heavier isotope seems to be incorporated to the shell carbonate.

• Korean Journal of Materials Research
• /
• v.12 no.11
• /
• pp.835-839
• /
• 2002

Metal-Ferroelectric-Metal(MFM) capacitors were prepared using $Bi_{3.3}$ $La_{0.7}$ $Ti_3$$O_{12}$ (BLT) ferroelectric thin films which were spin coated on $Pt/Ti/SiO_2$/Si substrates by the Sol-Gel method. BLT thin films annealed at above $650^{\circ}C$ showed polycrystalline structures with typical c-axis preferred orientation. The grain size and surface roughness were increased as the annealing temperature increased from $650^{\circ}C$ to $700^{\circ}C$. In addition, the full width at half maximum (FWHM) values were decreased with increasing annealing temperatures, indicating the improvement of crystallinity. The remanent polarization (2Pr= $Pr^{+}$ $+Pr^{-) }$ and leakage current of the BLT film annealed at $650^{\circ}C$ were about 29.3 $\mu$C/cm$^2$ and $2.3$\times$10^{-8}$$ A/cm^2$ at 3V. There were no distinct changes in the retention charges after $10^{10}$ polarization switching cycles, showing good fatigue property of the annealed BLT films.

• Journal of Mechanical Science and Technology
• /
• v.20 no.9
• /
• pp.1502-1513
• /
• 2006

This study analyzes the design and part load performance of a power generation system combining a micro gas turbine (MGT) and an organic Rankine cycle (ORC). Design performances of cycles adopting several different organic fluids are analyzed and compared with performance of the steam based cycle. All of the organic fluids recover greater MGT exhaust heat than the steam cycle (much lower stack temperature), but their bottoming cycle efficiencies are lower. R123 provides higher combined cycle efficiency than steam does. The efficiencies of the combined cycle with organic fluids are maximized when the turbine exhaust heat of the MGT is fully recovered at the MGT recuperator, whereas the efficiency of the combined cycle with steam shows an almost reverse trend. Since organic fluids have much higher density than steam, they allow more compact systems. The efficiency of the combined cycle, based on a MGT with 30 percent efficiency, can reach almost 40 percent. hlso, the part load operation of the combined system is analyzed. Two representative power control methods are considered and their performances are compared. The variable speed control of the MGT exhibits far better combined cycle part load efficiency than the fuel only control despite slightly lower bottoming cycle performance.

• ETRI Journal
• /
• v.40 no.2
• /
• pp.275-282
• /
• 2018

Flash reduction of graphene oxide is an efficient method for producing high quality reduced graphene oxide under room temperature ambient conditions without the use of hazardous reducing agents (such as hydrazine and hydrogen iodide). The entire process is fast, low-cost, and suitable for large-scale fabrication, which makes it an attractive process for industrial manufacturing. Herein, we present a simple fabrication method for a flexible in-plane graphene micro-supercapacitor using flash light irradiation. All carbon-based, monolithic supercapacitors with in-plane geometry can be fabricated with simple flash irradiation, which occurs in only a few milliseconds. The thinness of the fabricated device makes it highly flexible and thus useful for a variety of applications, including portable and wearable electronics. The rapid flash reduction process creates a porous graphene structure with high surface area and good electrical conductivity, which ultimately results in high specific capacitance ($36.90mF\;cm^{-2}$) and good cyclic stability up to 8,000 cycles.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.1995-2000
• /
• 2013

Layered $Li_{1.2}(Fe_{0.16}Mn_{0.32}Ni_{0.32})O_2$ was prepared by the mixed hydroxide method at various temperatures. Xray diffraction (XRD) pattern shows that this material has a ${\alpha}-NaFeO_2$ layered structure with $R{\bar{3}}m$ space group and that cation mixing is reduced with increasing synthesis temperature. Scanning electron microscopy (SEM) reveals that nano-sized $Li_{1.2}(Fe_{0.16}Mn_{0.32}Ni_{0.32})O_2$ powder has uniform particle size distribution. X-ray absorption near edge structure (XANES) analysis is used to study the local electronic structure changes around the Mn, Fe, and Ni atoms in this material. The sample prepared at $700^{\circ}C$ delivers the highest discharge capacity of 207 $mAhg^{-1}$ between 2-4.5 V at 0.1 $mAcm^{-2}$ with good capacity retention of 80% after 20 cycles.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.24-27
• /
• 2000

Ferroelectric P $b_{0.99}$〔(Z $r_{0.6}$S $n_{0.4}$)$_{0.9}$ $Ti_{0.1}$〕$_{0.98}$N $b_{0.02}$ $O_3$(PNZST) thin films were deposited by a RF magnetron sputtering on (L $a_{0.5}$S $r_{0.5}$)Co $O_3$(LSCO)/Pt/Ti/ $SiO_2$/Si substrate using a PNZST target with excess PbO of 10 mole％. The thin films deposited at the substrate temperature of 500 $^{\circ}C$ were crystallized to a perovskite phase after rapid thermal annealing(RTA) The thin films annealed at 650 $^{\circ}C$ for 10 seconds in air exhibited the good crystal structures and ferroelectric properties. The remanent polarization and coercive field of the PNZST capacitor were about 20 $\mu$C/$\textrm{cm}^2$ and 50 kV/cm, respectively. The reduction of the polarization after 2.2$\times$10$^{9}$ switching cycles was less than 10 ％.0 ％.％.0 ％.0 ％.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.1896-1906
• /
• 2020

The BEAVRS (Benchmark for Evaluation and Validation of Reactor Simulation) benchmark calculations were performed by DeCART stand-alone and DeCART/MATRA multi-physics coupled code system to verify their accuracy. The solutions of DeCART stand-alone calculations for the control rod bank worth, detector signal, isothermal temperature coefficient, and critical boron concentration agreed very well with the measurements. The root-mean-square errors of the boron letdown curves for two-cycles were less than about 20 ppm, while the individual and total control rod bank worth agreed well within 7.3% and 2.4%, respectively. For the BEAVRS benchmark calculations at the beginning of burnup, the difference between DeCART simplified thermal-hydraulic stand-alone and DeCART/MATRA coupled calculations were not significantly large. Therefore, it is concluded that both the DeCART stand-alone code and the DeCART/MATRA multi-physics coupled code system have the capabilities to generate high fidelity transport solutions at core follow calculations.