• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3666-3675
• /
• 1996

A new hardware temperature compensation method for hot-wire anemometer is investigated and an analog compensating circuit is proposed in this article. A photoconductive cell is introduced here as a variable resistor in the anemometer bridge and the linearized output of a thermistor is used to monitor the input of the photoconductive cell. In contrast with the conventional method, any type of temperature sensor can be used for compensation if once the output of thermometer varies linearly with temperature. So the present technique can diversify the compensating means from a conventional passive compensating resistance to currently available thermometers. Because the resistance of a photoconductive cell can be set precisely by adopting a stabilizing circuit whose operation is based on the integration function of the operational amplifier, the accuracy of compensation can be enhanced. As an example of linearized thermometer, thermistor sensor whose output is linearized by a series resistor was used to monitor the fluid temperature variation. Validation experiment is conducted in the temperature ranged from 30 deg. C to 60 deg. C and the velocity up to 40 m/s. It is found that the present technique can be adopted as a compensating circuit for anemometer and hot-wire type airflow meter.

• 대한전자공학회논문지SD
• /
• 제46권8호
• /
• pp.12-17
• /
• 2009

마이크로프로세서를 사용하여 디지털 방식에 의해 온도보상을 하는 버스트 모드 광송신기를 구현하였다. 기존 실시간으로 신호를 처리하는 아날로그 방식의 온도보상 방법에 비하여, 본 연구에서 구현한 디지털 방식의 온도보상은 신호를 샘플링 처리함으로써 고속 버스트 모드 광신호를 효과적으로 처리할 수 있다. 온도보상을 위한 디지털 자동전력조절 방식은 데이터 전송속도에 영향을 받지 않을 뿐만 아니라, 아날로그 방식에 비해 보다 정확하고 효율적이므로 Gb/s 이상의 고속 버스트 광신호 처리에 유용하게 사용될 수 있다.

• ETRI Journal
• /
• 제31권5호
• /
• pp.601-603
• /
• 2009

This letter presents a high performance 2.4 GHz two-stage power amplifier (PA) operating in the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$ for IEEE 802.11g, wireless local area network application. It is implemented in InGaP/GaAs hetero-junction bipolar transistor technology and has a bias circuit employing a temperature compensation technique for error vector magnitude (EVM) performance. The technique uses a resistor made with a base layer of HBT. The design improves EVM performance in cold temperatures by increasing current. The implemented PA has a dynamic EVM of less than 4%, a gain of over 26 dB, and a current less than 130 mA below the output power of 19 dBm across the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.805-808
• /
• 2008

피복이 없는 FBG센서는 내구성이 약하기 때문에, 실제 토목구조물에서는 적용이 어렵다. 따라서 packaged FBG센서는 피복이 없는 FBG센서의 단점을 보안하고, 실제 구조물에 적용이 가능하도록 발전된 형태이다. 이런 packaged FBG센서를 이용하여 변형률과 온도를 동시에 측정할 때, 온도보정은 없어서는 안 될, 필수적 기술이다. 이 논문에서는 steel sleeve packaged FBG센서의 온도보정 기술을 도출하고, 콘크리트 보부재를 이용한 실험을 통해 온도보정 기술의 현장적용 가능성을 제시하였다. 따라서 이 논문에서 사용된 온도보정 기술은 실제 여러 토목구조물의 모니터링에 확대 사용할 수 있다.

• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.295-303
• /
• 1996

A new temperature compensation technique for hot-wire anemometer is proposed in this article. In contrast to the available compensation techniques, a photoconductive cell is introduced here as a variable resistor in the bridge. The major advantage of adopting an active component such as photoconductive cell is that temperature compensation can be achieved by using any kind of temperature sensors, once the output of temperature sensor is given as a voltage. Thereby, the temperature compensation can be made automatically and intelligently by a computer software or a hardware device. Validation experiments using a photoconductive cell with a thermocouple-thermometer are conducted in the temperature range from 3$0^{\circ}C$ to 5$0^{\circ}C$ and the velocity ranges from 8 m/s to 18 m/s.

• 한국방재학회 논문집
• /
• 제8권6호
• /
• pp.1-5
• /
• 2008

피복이 없는 FBG센서는 내구성이 매우 약하기 때문에 FBG센서 주위의 피복이 없이는, 많은 변수가 존재하는 실제 자연환경에서의 정확한 데이터수집이 어렵다. Steel sleeve packaged FBG 변형률 센서는 토목공학에서 널리 사용되고 있는 센서 중 하나이다. 변형률과 온도가 동시에 측정되는 FBG센서의 도입 이후로, 변형률과 온도의 정확한 보정은 필수적인 과정이 되었다. 이 논문에서는 FBG의 변형률과 온도의 측정 원리에 기초하여 steel sleeve packaged FBG센서의 온도보정 기술을 도출하였다. 그리고 두개의 FBG센서를 이용한 콘크리트 초기재령의 건조수축 실험을 통해 온도보정의 실행 가능성을 확인하였다.

• 대한전자공학회논문지
• /
• 제27권4호
• /
• pp.563-570
• /
• 1990

A silicon pressure sensor made of a full bridge of diffused resistors was designed and fabricated using semiconductor integrated circuit process. Thin diaphragms with 30\ulcorner thickness were obtained using anisotropic wet chemical etching technique. Our device showed strong temperature dependence. Compensation networks are used to compensate for the temperature dependence of the pressure sensor. The bridge supply voltage having positive temperature coefficient by compensation networks was utilized against the negative temperature coefficient of bridge output voltage. The sensitivity fluctuation of pressure sensor before temperature compensation was -1700 ppm/\ulcorner, while it reduced to -710ppm\ulcorner with temperature compensation. Our result shows that the we could develop accurate and reliable pressure sensor over a wide temperature range(-20\ulcorner~50\ulcorner).

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1682-1688
• /
• 2012

This paper introduces a GP(Genetic Programming) based robust technique for temperature compensation in short-range prediction. Development of an efficient MOS(Model Output Statistics) is necessary to correct systematic errors of the model, because forecast models do not reliably determine weather conditions. Most of MOS use a linear regression to compensate a prediction model, therefore it is hard to manage an irregular nature of prediction. In order to solve the problem, a nonlinear and symbolic regression method using GP is suggested. The purpose of this study is to evaluate the accuracy of the estimation by a GP based nonlinear MOS for 3 days temperatures in Korean regions. This method is then compared to the UM model and has shown superior results. The training period of 2007-2009 summer is used, and the data of 2010 summer is adopted for verification.

• 산업기술연구
• /
• 제25권B호
• /
• pp.183-188
• /
• 2005

Instead of the incandescent lamps the LED lamps have been used on the traffic signal lamp with the advantages of small loss, no lens and long life. In this paper, we have compared three kinds of the LED controller structures and showed the LED array decision methods. We studied the temperature characteristics on LED and the temperature compensation network. The experimental results showed that the electrical characteristics of three kinds of the LED controller structures were different each other. We concluded that the temperature compensation is the important technique, the best compensation network has the ${\pm}10%$ variation for the luminous intensity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.718-721
• /
• 2003

It is often desirable that manufacturers and users can convert the reference white of display into the preferred color temperature by controlling the color temperature that is one of representative color characteristics of a light source. Accordingly, this paper proposes an efficient method of color compensation for displaying the uncalibrated video signal in PDP-TV and is also shown to be successfully coupled with flexible color temperature conversion based on the signal processing technique.