• Journal of Plant Biotechnology
• /
• v.37 no.4
• /
• pp.562-566
• /
• 2010

SOD2-transgenic $T_3$ petunia line (A2-36-2-1-1-35) was treated with different levels of methyl viologen (MV) to determine its resistance to oxidative stress. Four (4) levels of MV (0, 100, 200, and $400\;{\mu}M$) were applied. The SOD2-transgenic $T_3$ petunia line exhibited a very significant oxidative stress resistance at the highest MV concentration ($400\;{\mu}M$) treatment compared to non-transgenic plant. RNA and protein expression of SOD2 transgene and higher parenchyma cell density in the transgenic petunias exhibiting resistance to oxidative stress proves its contribution to the expression of its resistance to oxidative stress.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.3936-3951
• /
• 2011

This paper aims to analyze factors affecting technology transfer performance according to different types of Korean universities and to conduct the research for the channel and extent of impact between these factors, utilizing 5 - year data for the technology transfers of 110 universities based on the survey by National Research Foundation of Korea. According to the analysis, incentive for researchers is the most crucial factor in local universities and small & medium-sized private universities located in the capital area. And numerical value of intellectual property rights owned by university is the key factor in universities specializing in science & engineering / industry. Also, Big-sized universities are heavily affected by the number of full-time faculty. In case of private universities, government subsidy relating to patents is critical factor for technology transfer performance. The mean value of all variables is a lot higher in participant universities than non-participant ones in CK(Connect Korea) project. In summary, it is suggested that steady financial support provided by the government is required and that mutual cooperation for industry-university-government is also needed for the commercialization of the technologies held by universities.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.652-652
• /
• 2013

The conventional thermal chemical vapor deposition (CVD) setup for the graphene synthesis has mainly used convective heat transfer in order to heat a catalyst (e.g. Cu) up to $1,000^{\circ}C$. Although the conventional CVD has been so far widely accepted as the most appropriate candidate enabling mass-production of high-quality graphene, this method has stillremained under the standard for the commercialization largely due to the poor productivity arisen out of the required long processing time. Here, we introduced a fast and efficient synthetic route toward CVD-graphene. Unlike the conventional CVD using convection heat transfer, we adopted a CVD setup utilizing conduction heat transfer between Cu catalyst and rapid heating source. The high thermal conductive nature of Cu and the employed rapid heating source led to the remarkable reduction in processing timeas compared to the conventional convection based CVD (Fig. 1A), moreover, the synthesized graphene was turned out to have comparable quality to that synthesized by the conventional CVD (Fig. 1B). For the optimization of the conduction based CVD process, the parametric studies were thoroughly performed using through Raman spectroscopy and electrical sheet resistance measurement. Our approach is thought to be worth considerable in order to enhance productivity of the CVD graphene in the industry.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.1090-1108
• /
• 2013

Recently national technology commercialization policy using the outcomes of public R&D has been promoting the activities of technology transfer and licensing. Firms also are considering licensing strategies to make great strides and strengthen their future competitiveness. In the licensing deals, objective and reasonable royalty determination is required to be accepted for both negotiation parties. This study analyzed the appropriate royalty range for various types of business and established three royalty influential factors with ten valuation items to explain royalty difference. This study suggested new method to estimate rationally reasonable running royalty rate, combining the appropriate royalty range from classic 25% rule and the result evaluated from royalty influential factors. The adequacy of royalty range from classic 25% rule is confirmed because its range is similar to that of royalty of transfer cases. The final estimate of running royalty can be made from linear function for royalty determination using the results of royalty range and royalty influential factors. This method suggested here is expected to practically useful to determine an appropriate running royalty rate for licensing negotiation.

• STI Policy Review
• /
• v.8 no.1
• /
• pp.23-40
• /
• 2017

This article provides a comprehensive review of the entrepreneurial university concept and its place and role in the triple helix of university, industry, and government. This is increasingly important because stake-holders' expectations towards universities are growing; this growth in turn leads to increased pressure on universities to move beyond their traditional roles and models towards taking responsibility for economic development, large scale basic education and targeted further education and the development of value from research. These expectations provide opportunities for universities, but impose threats on the existing models and practices. It further elaborates on implications for university management, departments, faculty members and supporting organizations. Moreover it reflects on the meaning of the entrepreneurial university for stakeholders, i.e., university boards, regional and national policy and administrative bodies, funding agencies, the business community, university ranking institutions and the global university community overall. Recent literature on entrepreneurial universities is incomplete and mostly focused on the commercialization of research, technology transfer and the third mission of universities. The article expands the predominant thinking about entrepreneurial universities and gives a broader structured definition. Eventually the article shows the need for STI policy to intervene and measures for developing entrepreneurial universities further.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.3
• /
• pp.193-201
• /
• 2021

Patents for postharvest technology of fresh fruits, vegetables and mushrooms fluctuated in their filing number until the 2000s, but then there has been a steady increase in the 2010s, indicating that the technology has high growth potential in the international agricultural market. Using 551 valid patents for fresh fruits and 337 for fresh vegetables of 5 countries, patent trend of postharvest technology was analyzed in this study with two categorized technologies as packaging and storage. In Korea, patents from national research institutes such as the Korea Food Research Institute and Korea (Rural Development Administration) are dominated, and a number of patents for the postharvest storage of fresh vegetables by Mitsui Chemicals, a Japanese chemical company, have been registered. Agrofresh, a multinational company in the USA, holds a number of patents for postharvest storage of fresh fruit not only in its own country, but also in Japan and Europe. Postharvest technology of fresh fruits and vegetables was found to has a number of patents, mainly from national research institutes and multinational corporations, and this suggests that R&D and commercialization of the technologies are actively taking place.

• STI Policy Review
• /
• v.4 no.2
• /
• pp.74-95
• /
• 2013

Rapid changes in the economic, social and academic environments often provide opportunities to develop new and advanced technologies. In China, recent literature on the role of universities suggests that university-industry linkages (UILs) play a substantial role in the development of high-tech industries. Since 1979 when the country became more open and underwent economic reform, Chinese central authorities, local governments, and universities have continued to set up various science and technology (S&T) policies to stimulate UILs, contributing to China's technological progress and economic growth. This study examines the role of S&T policies on UILs such as transfer of technology, joint research, and spin-off creation with a particular focus on Nanjing University (NJU) in Jiangsu Province. Nanjing has over 53 universities, ranking it behind Beijing and Shanghai in terms of S&T and higher education opportunities. By adopting "institutional methodology," this study contends that UILs not only benefit universities and industry but also society in terms of job training, consulting activities, joint research, R&D results commercialization, patent licensing, new business creation, and other aspects. Finally, we suggest that the Chinese experience, though with some problems, might enhance our understanding of how to stimulate UILs through the arrangement of various S&T policies.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.271-279
• /
• 2018

During the seven years from 2009 to 2016, PWR SNF (spent nuclear fuel) transportation and storage systems suitable for domestic conditions were developed by the government to cope with the saturation of wet storage capacity in NPPs. One of the developed systems is a multipurpose metal cask applicable for transportation/storage; the other is a concrete cask dedicated to storage. Efficient cask technologies were secured utilizing the characteristics and experience of relevant industrial, academic and research institutes. Technological independence was also achieved through several patent registrations of research outcomes. To prepare for a rapid increase of demand in the near future, technology transfer of secured patents and technologies to the domestic industry was carried out twice in the years of 2016 and 2017.

• Environmental and Resource Economics Review
• /
• v.13 no.3
• /
• pp.469-497
• /
• 2004

Environmental R&D management system has been analyzed with LCA method. Based on the analysis, we found the following four elements were essential for improving effciency of environmental R&D management system: establishment of an information clearinghouse that collects and distributes information on the status of the domestically owned environmental technology, Periodic survey of the environmental technology demand to give guidance in selecting the environmental R&D project that are to be subsidized, dissemination of information on the technology transfer and commercialization assistance program, and increased funding as well as the expansion of project categories eligible for R&D subsidy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.155-167
• /
• 2016

Technology valuation is necessary for determining the feasibility of technology commercialization. However, existing methods focus only on technology evaluation, with limitation in sufficiently reflecting buyer viewpoint. In addition, it causes a gap between estimated value and market value. Therefore, this research suggests a new technology valuation method which focuses on the perspectives of buyers. Technology factors, buyer factors and market factors are first determined and their relationships are analyzed. Second, based on the relationships, profit projections are calculated using the discount cash flow method. Finally, profit projections for each year are discounted. The proposed method was applied using the ubiquitous home network system and audio service and illumination control method and results compared with the value of a technology valuation guide distributed by the Ministry of Trade, Industry and Energy. The technology valuation approach used in this research is quantitative and systematic and can be used as a decision making support tool in technology transfer, reflecting various perspectives of stakeholders.