• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.241-245
• /
• 2006

In the examination of Steam Generator (SG) tube in Nuclear Power Plant (NPP) Eddy Current Testing (ECT) probes play an Important role in detecting the defects. Bobbin probe and Rotating Pancake Coil (RPC) probe is usually used for the inspection of SG tube. Bobbin probe is good at high speed inspection, but ability of detection of circumferential defect is very weak. On the contrary RPC probe, which moves for inspection in the direction of axial and circumferential simultaneously, has very slow inspection speed, but it was excellent detection capability fur small cracks, which is hardly detected by bobbin probe. Many examinations of SG tube examination of NPP are achieved during short period. Therefore, solution about this must develop probe of new form for examination performance and examination time shortening of other probe. In this paper, analyzed technological present condition of Bob-bin probe and RPC probe been using in Nondestructive Testing (NDT) for SG tube defect detection and Appeared about background theory and view of developed probe newly.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2000.11a
• /
• pp.227-245
• /
• 2000

Korean firms have attempted to catch up in the aircraft industry during last quarter century. Korean firms have built up their capabilities by moving from parts manufacturing through subassembly to system integration. The number of projects carried out and the intensity of technological effort undertaken by firms strongly influences market position and firm performance. However, successful catching up is not simply dependent on capability building within the firm. The national environment (Porter, 1990) in which firms are located plays a pivotal role. The Korean government has been effective in creating a favorable environ-ment in many areas, but has not been able to replicate this success in the aircraft industry. Opportunities for learning in the aircraft industry have been hampered by the small size of the Korean civilian aircraft market and the sophisticated requirements of military systems. A policy of domestic rivalry in airframe manufacture has created too many firms for such a small market. The ability of Korean firms to catch up in the aircraft industry depends on both the internal capabilities of firms as well as appropriate government policies and the involve- ment of government research institutions and universities over an extended period of time. There have been many studies about the catching up of developing countries in mass production (such as automobile, consumer electronics, and recently DRAM), but few in complex systems, such as aircraft.

• Tribology and Lubricants
• /
• v.32 no.5
• /
• pp.166-171
• /
• 2016

Electric vehicle ownership is expanding for two reasons: its technology features have enhanced fuel economy, and the number of vehicle emissions regulations is increasing. Battery performance has a large influence on the capability of electric vehicles, and even though battery thermal management has been actively researched, specific technological improvements to battery performance are not being presented. For instance, many industrial applications utilize vortex tubes as components for refrigeration machines because of their numerous intrinsic benefits. If electric vehicles incorporate vortex tubes for battery cooling, performance and efficiency advancements are possible. This study uses a counter-flow vortex tube to investigate its temperature separation characteristics, based on the back pressure of the cold air exit and the difference between the inlet and back pressures. The experiment uses a vortex tube with the following parameters: six nozzle holes, a 20 mm inner vortex diameter (D), a 14D tube length, a 0.7D cold exit orifice diameter, and a nozzle area ratio of 0.142. The measurements prove that the temperature difference between the hot air and cold air decreased because of the flow resistance of the hot air and the backflow phenomenon at the cold air exit. The flow resistance causes the temperature difference to decrease, and the back pressure of the cold air exit influences the flow resistance. The results show that the back pressure significantly influences the efficiency of temperature separation.

• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.395-404
• /
• 2013

Purpose: Technology readiness assessment(TRA) used as a standard readiness assessment tool in the acquisition program of weapon system has some limitations in the comprehensive understanding of the complex system. Therefore, this research is intended to suggest a holistic maturity assessment method for the acquisition of high quality weapon system. Methods: Technology readiness level(TRL), manufacturing readiness level(MRL), integration readiness level(IRL) and system readiness level(SRL) developed to assess system maturities in the various aspects are compared and analyzed to draw an improvement avenue for the current readiness assessment method. Results: TRL, MRL, IRL and SRL have large differences in their maturity targets during the acquisition life cycle: technological performance, manufacturing capability, interface between components and total system, respectively. They complement one another's shortcomings Conclusion: To achieve a successful acquisition of high quality weapon system, multi-dimensional readiness assessment is required. Therefore, comprehensive readiness assessment using TRL, MRL, IRL and SRL will contribute to the acquisition of high quality weapon system through the accurate maturity information of overall system.

• Journal of Korean Academy of Nursing Administration
• /
• v.18 no.1
• /
• pp.23-32
• /
• 2012

Purpose: The purpose of this study was to assess the clinical application of a bar code medication administration and blood transfusion system and to identify its effects from the aspect of patient safety and nurse satisfaction in a tertiary hospital. Methods: The system in this study was PDA with bar code reading capability and wireless networking function. The logs created during application of the system and administration error reports were analyzed. For nurses' satisfaction with the system, data were collected from 337 nurses using the instrument developed by Otieno et al. and analyzed using descriptive statistics. Results: The system application rate was 98.8%, and the main failure cases in the system application included bar code or network related factors. When the system was applied, 0.02% of errors were prevented. The nurses were satisfied with the system from the aspect of patient safety, however relatively less satisfied with the system from the aspect of work efficiency. Conclusion: The results of the study indicate the usefulness for patient safety of applying the bar code medication administration and blood transfusion system to clinical practice. However technological improvements including bar code and network communication are necessary to ensure higher work efficiency in nursing practice.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.228.1-228.1
• /
• 2012

Digital waveform generation technology for SAR payload can be divided into DDS(Direct Digital Synthesizer) method and Memory Mapped(M/M) method. DDS is the single chip which consists of the Sine Table, NCO(Numerically Controlled Oscillator), DAC, and so on. DDS method is a very simple method because the circuit configuration is not complex but has a disadvantage that can not control phase and amplitude easily by using NCO. M/M method has the complexity of the circuit configuration because it requires the memories which stores the waveforms, the control circuits, and DAC. And this method should apply the high interface technology for being compatible with the wide bandwidth of the digital signal and has the difficulty for PCB design because the number of the signal lines should be increased according to the number of the data bits for DAC. Although it has several disadvantages, this method has the capability of pre-distortion function which can compensate the phase and amplitude characteristics of the system and also has an excellent advantage to make any arbitrary waveform, so this method is considered as an important technology with DDS method. This research describes the technological trends of the waveform generator for the SAR payload and analyzes the characteristics of the technology.

• KIEAE Journal
• /
• v.16 no.4
• /
• pp.79-86
• /
• 2016

Purpose: Frequently, the apartment management offices have difficulties in effective repair works due to their insufficient technological capability to operate long-term repair program. There also have been many cases of failure in executing urgent repairs mainly because the repair allowance has not accumulated enough for the repair works on time. This study aimed to determine core items in apartment maintenance in order to reduce the confusion and unnecessary efforts for the management office by suggesting simple list of repair items. Method: Core items are defined using several indicators. The degrees of necessity for repair work(NRW) are calculated combining the impacts to living, safety, and aesthetics. Then the degrees of burden of repair cost(BRC) are estimated by analyzing actual long-term repair program of three apartment complexes. Lastly the degrees of accumulation demand for repair allowance(AD) are calculated with NRW and BRC. Result: The core items and essential items are suggested for three apartment types as case studies based on the indicators of NRW, BRC, and AD. Then, the required accumulated allowance per $m^2$ was calculated to effectively implement repair works.

• Smart Structures and Systems
• /
• v.11 no.4
• /
• pp.349-364
• /
• 2013

Recently, researchers in the field of structural health monitoring (SHM) have been rigorously striving to replace the conventional NDE techniques with the smart material based SHM techniques, employing smart materials such as piezoelectric materials. For instance, the electromechanical impedance (EMI) technique employing piezo-impedance (lead zirconate titanate, PZT) transducer is known for its sensitivity in detecting local damage. For practical applications, various external factors such as fluctuations of temperature and loading, affecting the effectiveness of the EMI technique ought to be understood and compensated. This paper aims at investigating the damage monitoring capability of EMI technique in the presence of axial stress with fixed boundary condition. A compensation technique using effective frequency shift (EFS) by cross-correlation analysis was incorporated to compensate the effect of loading and boundary stiffening. Experimental tests were conducted by inducing damages on lab-sized aluminium beams in the presence of tensile and compressive forces. Two types of damages, crack propagation and bolts loosening were simulated. With EFS for compensation, both cross-correlation coefficient (CC) index and reduction in peak frequency were found to be efficient in characterizing damages in the presence of varying axial loading.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.924-926
• /
• 2006

Sensor networks are an emerging area of mobile computing. Networked sensors represent a new design paradigm enabled by advances in micro electro-mechanical systems (MEMS) and low power technology. Created with integrated circuit (IC) technology and combined with computational logic, these 'smart' sensors have the benefit of small size, low cost and power consumption, and, the capability to perform on-board computation. Though this recent technological innovation has shown a significant promise in many application domains, it has also exposed several technical limitations that must be improved. In this paper, we discuss the system deploy issues for infrared thermo sensor camera calibration.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.2
• /
• pp.49-61
• /
• 2019

As the technological gap amongst manufacturers decreases, the life cycle of products has shortened, and competition accelerates due to the development of technology, incumbent manufacturing companies face growth limitations. In order to overcome such business issues, manufacturing companies are increasingly interested in changes in business models and innovations, especially in the direction of providing services where they can maintain the competitive advantage of their products. In such context, this empirical study examines managerial leadership, differentiation strategies, and products and services pricing as 'servitization factors', which can be driving forces for moving into a new era of growth for Korean SMEs, focusing on the mediating effects of servitization competency. The results are as follows : First, it was confirmed that executive leadership, differentiation strategy, and information & communication technology capability have a direct effect on service sales. Second, the process competency, partnership competency, and ICT competency, which are presented as the service competence of SMEs, were found to play an important role in inducing service sales in managerial leadership, differentiation strategy, product and services pricing. It also emphasized the role of the public policy such as helping to foster SMEs as key partners in the expansion of social facilities and establishing platforms through ICT and data utilization for the convergence of manufacturing services.