• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.189-203
• /
• 2008

The physical and chemical properties of radioactive waste drums, which have been temporarily stored on site, should be characterized before their shipment to a disposal facility in order to prove that the properties meet the acceptance guideline. The investigation of NDT(Nondestructive Test) method was figured out that the contents in drum, the quantitative analysis of free standing water and void fraction can be examined with X-ray NDT techniques. This paper describes the characteristics of X-ray NDT such as its principles, the considerations for selection of X-ray system, etc. And then, the waste drum characteristics such as drum type and dimension, contents in drum, etc. were examined, which are necessary to estimate the optimal X-ray energy for NDT of a drum. The estimation results were that: $(R)\acute{A}$ the proper X-ray energy is under 3 MeV to test the drums of 320 ${\beta}\S$ and less; $(R)\ddot{E}$ both X-ray systems of 450 keV and/or 3 MeV might be needed considering the economical efficiency and the realization. The number of drums that can be tested with 450 keV and 3 MeV X-ray system was figured out as 42,327 and 18,105 drums (based on storage of 2006. 12), respectively. Four testing scenarios were derived considering equipment procurement method, outsourcing or not, etc. The economical and feasibility assessment for the scenarios was resulted in that an optimal scenario is dependent on the acceptance guide line, the waste generator's policy on the waste treatment and the delivery to a disposal facility, etc. For example, it might be desirable that a waste generator purchases two 450 keV mobile system to examine the drums containing low density waste, and that outsourcing examination for the high density drums, if all NDT items such as quantitative analysis for 'free standing water' and 'void fraction', and confirmation of contents in drum have to be characterized. However, one 450 keV mobile system seems to be required to test only the contents in 13,000 drums per year.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.3
• /
• pp.3860-3871
• /
• 1975

This experiment was carried out to establish the mechanized methods in stumping and root-clearing, which were the most important works in the reclamation of sloping uplands. The determination of optimum teeth interval of rake blades and its operation methods to reduce the quantity of transported topsoil during the works, are the aims of this investigation. A newly designed rake blade, whose net teeth intervals could be regulated by three stages as 15cm, 25cm, and 35cm, was manufactured to attach to the bulldozer of 13ton. The experiments were carried out at Kilsang-Myon, Kwangwha-Gun, from Aug. 9 to Aug. 23, 1975. For each interval, 36 test plots of 50${\times}$10mn in size, which were regulated under three levels of land slopes of 10, 20, and 30% and two different tree stand density of high or medium values, were randomly chosen and arranged by two-replicated split-split plot design. Each stump classified by its diameter was stumped and cleared by the rake dozer to be related between diameter and stumping time. The results obtained in this experiment can be summarized as follows: 1. Stumping times for the diameters ranging from 6 to 18cm of stumps are almost the same and they are not varied by the difference of teeth intervals of rake dozer. 2. By back-ward stumping method, the number of stumps which can be stumped per hour ranges almost from 100 to 170, showing significant difference with respect to the teeth intervals. The working area is sharply varied with not only the stand density of stumps but the teeth intervals. 3. Optimum stumping distance for each teeth interval of rake dozer to minimize the quantity of transported topsoil are varied with such the rates as it is 15m or 20m for 15cm of teeth interval, but 25m for 25cm or 35cm, respectively. The clearing distance could be chosen almost double as long as the operating distance. 4. The working areas per hour of the simultaneous stumping and clearing methods are no significant difference among the various treatments of working conditions, but they are affected by the operating techniques. However, the influencing factors of the working conditions as classified before and the working directions are ranged from 10 to 15 per cent of total working area, respectively. 5. The residual rates of stumps which are not stumped by the rake dozer in each test plot are generally reduced as the teeth interval gets narrower, but there are no significant difference among them. The mean residual rates average to be about 4% for the simultaneous stumping and clearing method. The back-ward stumping method are recommended to be supervised and directed by more than one man, to show the operator where the stumps are located. 6. The results according to the stumping and clearing methods are summarized as Table IV-2. And the selection of working methods is recommended to follow as shown in Fig. IV-9 with respect to the stand density of the field. 7. Generally speaking, the narrower the teeth interval, the better become the working results, but the more the quantity of transported topsoil is increased. Therefore, it is recommended that the teeth interval should be reduced from the present distance of more than 30cm to 25cm or 15cm, by developing suitable working methods through more field works and experiments.

• Cartoon and Animation Studies
• /
• s.44
• /
• pp.85-116
• /
• 2016

This is the in-depth research dealing with Animatoon, the only animation-specialized magazine in Korea. By examining articles provided under the 'Animatoon Report' category, which is one of article categories set by the publisher, this research tries to find out the topic of articles and examine the tendency of topic. 'Animatoon Report' is chosen because the category title does not clearly show characteristics of articles, but has the second largest number of articles among all categories. First, the articles of the first ten years (1995-2005) has the largest number of pages as well as images, which means each article of this period tries to enrich its contents. Second, the role of magazine reporters are not critical considering the number of articles written by reporters are smaller than those made by the editorial department. Third, articles tries to deal with diverse issues and are mostly placed in front of the magazine. Fourth, in early days, articles used to provide the 3~5 lines of introductory summaries, but changed into provide the lead, the Korean and English subtitle, and so on. Fifth, articles mostly focus on issues of animation and Korea rather than other areas and countries. The results on the basis of article type are as follows. Among the types of people, work, organization/company, event, policy/industry, and etc, the policy/industry type has the largest amount of articles, and articles on the policy and those on the industry shows similar number of articles. Second, the event type has the second largest number of articles even though there are several separate categories only for the event. Third, articles in the et cetera type are often seen in early days because Animatoon who did not systemize the company itself focused on animation history and production techniques. Fourth, articles both on the people and the work type are consistently seen through the whole time period, but those on organization/company and event has more and more articles as time passes. In conclusion, it is possible to mention that the 'Animatoon Report' type shows more interest in policy and industry, and its interest on both issues are consistently seen from 2001 to 2015.

• Cartoon and Animation Studies
• /
• s.44
• /
• pp.143-161
• /
• 2016

This study was conducted focusing on the role of auteurism animation. The purpose of auteurism animation is to criticize irregularities of a society in witty and fierce way through satires from the sharp perspectives of a animator that is not bound by tastes of people or the interests or standpoints of specific groups, and thus to induce positive changes in a society as a purifier. In the context, this study investigated satires shown in by Jan Svankmajer and by Norman Mclaren among the animators who utilize animation as a tool to produce social meaning. As a result, the following characteristics and meanings were found. First, Dimensions of Dialogue is an animation that satires absurdity and irregularities of a human society in symbolic and exceptional way through directing by segmentations of images and omnibus structures. The satire carries the lesson of improvement in the hidden part of cynical attack to history, society, and human beings. It also maximizes absolute reality and engagement of images of Jan Svankmajer through unique and grotesque images of the animator such as alienated world, confusing shapes, and amusement of irregularities. Second, the movie, is an exemplary animation that applied core concept of animation through pixilation techniques based on an event story structure by causal relationship. It satires the changing process of a good man to violent madness through confrontation and conflicts for material desires, with exaggerated slipstick movements and humors as a black comedy. The satire methods of both animation works are delivered through unique image styles and symbolic wordage of the animators who triggered ironical laughter in attacking humanism and moral insensitivity that might be felt seriously otherwise. That is, the animators try to show the positive will for changing the society to a sound one through the form of negativity in terms of moral perspective in animation rather than destruction against the target. As such, the satires in both works worked as an auteurism allegory that maximizes social functions and artistic influence of animation.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.485-494
• /
• 2000

According to the worldwide interest in controlling $CO_2$ which contributes to green house effect. new techniques of reducing $CO_2$ are under development. We have developed new technique for reducing $CO_2$. In low $CO_2$ concentration. the chemical absorption method is useful. In this study. the kinetics of the reaction between $CO_2$ and the sterically hindered amine solution with piperazine. have been investigated from measurements of the rate of absorption of $CO_2$ in the stirred vessel that has a horizontal liquid-gas interface, in the temperature range $30{\sim}70^{\circ}C$. The experiments were carried out in the range 10.130~20.260 kPa of partial pressure of $CO_2$, and in aqueous $2.0kmol/m^3$ AMP solution with $0{\sim}0.4kmol/m^3$ piperazine The experimental results are as follows: 1) The absorption rate of $CO_2$ into aqueous AMP + piperazine solution is gett ng faster than that of aqueous AMP absorbents with temperature. Because the activation energy of piperazine 57.147 kJ/mol is higher than that of AMP 41.7kJ/mol. therefore the effect of piperazine on absorption rate increases with temperature. 2) Compared with aqueous AMP solution. the absorption rate of $CO_2$ into AMP + piperazine solution increases from 6.33% at $30^{\circ}C$ to 12% at $70^{\circ}C$, so AMP + piperazine solution is thought to be a better than AMP solution, 3) The reaction rate constants of piprazine in aqueous AMP solution with $CO_2$ have been determined as 217.21, 420.46, 707.00 and $3162.167m^3/kmol{\cdot}s$ respectively at 30, 40, 50 and $70^{\circ}C$ but these results are higher than those of Xu which were 186.7. 367.32. 693.01. $2207.65m^3/kmol{\cdot}s$ at 30, 40, 55, $70^{\circ}C$in aqueous MDEA solution. So the regression analysis of the data has led to the following equation In $k_p$ =28.324-6934.7/T.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.11
• /
• pp.603-610
• /
• 2016

This work studies the synthesis of birnessite (${\delta}-MnO_2$), a catalyst of oxidative-coupling reactions, from the powder of spent alkaline manganese batteries (SABP, <8 mesh) and evaluate its reactivity for 1-naphthol (1-NP) removals. Manganese oxides using commercial reagents ($MnSO_4$, $MnCl_2$) and the acid birnessite (A-Bir) by McKenzie method were also synthesized, and their crystallinity and reactivity for 1-NP were compared with one another. 96% Mn and 98% Zn were extracted from SABP by acid leaching at the condition of solid/liquid (S/L) ratio 1:10 in $1.0M\;H_2SO_4+10.5%\;H_2O_2$ at $60^{\circ}C$. From the acid leaching solution, 69% (at pH 8) and 94.3% (pH>13) of Mn were separated by hydroxide precipitation. Optimal OH/Mn mixing ratio (mol/mol) for the manganese oxide (MO) synthesis by alkaline (NaOH) hydrothermal techniques was 6.0. Under this condition, the best 1-NP removal efficiency was observed and XRD analysis confirmed that the MOs are corresponding to birnessite. Kinetic constants (k, at pH 6) for the 1-NP removals of the birnessites obtained from Mn recovered at pH 8 (${Mn^{2+}}_{(aq)}$) and pH>13 ($Mn(OH)_{2(s)}$) are 0.112 and $0.106min^{-1}$, respectively, which are similar to that from $MnSO_4$ reagent ($0.117min^{-1}$). The results indicated that the birnessite prepared from the SABP as a raw material could be used as an oxidative-coupling catalyst for removals of trace phenolic compounds in soil and water, and propose the recycle scheme of SAB for the birnessite synthesis.

• Clinical and Experimental Pediatrics
• /
• v.45 no.4
• /
• pp.459-465
• /
• 2002

Purpose : The aim of this study was to evaluate the latest tendency of esophageal foreign body's extraction and to obtain a consensus from recent trends of indications and techniques of flexible endoscopy of esophageal FB in children. Methods : We retrospectively reviewed medical records of 127 cases with foreign bodies in esophagus at Dept. of Pediatrics and Otorhinolaryngology, Gyeongsang National University Hospital (GNUH) from Jun, 1987 to July, 2001. They were divided into two groups by the kinds of endoscopy : flexible endoscope(66 cases) or rigid endoscope(61 cases). Rigid endoscopy was performed under general anesthesia at Dept. of Otorhinolaryngology but flexible endoscopy was performed without general anesthesia or sedative drugs(midazolam or diazepam). Results : An annual number of cases of two groups were similar from 1991 to 1998. But from 1999, flexible endoscopy was performed actively. Asymptomatic cases were frequently observed in flexible endoscopy(28 cases/66 cases) but swallowing difficulties were frequently observed in the rigid endoscopy group(25 cases/61 cases). Other symptoms were vomiting, irritability, chest discomfort and abdominal pain. The total number of cases with underlying disease(esophageal stenosis, cerebral palsy) was 8. The total number of cases with complications (erosion, ulcer, bleeding, perforation) was 11. The above cases were not correlated between the two groups. In 55 cases(83.3%) of the flexible endoscopic group and 53 cases(86.8%) of the rigid endoscopic group, foreign bodies in the esophagus were removed within 24 hours. Conclusion : We could not find any benefit in rigid endoscopic technique. Flexible endoscopic FB removal can be performed safely and effectively in children by an experienced endoscopist.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.2
• /
• pp.69-77
• /
• 2011

Purpose: This study was retrospectively performed to compare the clinical outcomes of modified Brostrom procedures using the single suture anchor and the double suture anchor for chronic lateral ankle instability. Materials and Methods: Thirty-seven patients were followed up for more than 1 year after the modified Brostrom procedures using suture anchor. Single surgeon treated seventeen cases with single suture anchor and 20 cases with double suture anchor. The clinical evaluation was performed according to the Karlsson scale and Sefton grading system. Radiologic measurement of the talar tilt and anterior talar translation was performed through anterior and varus stress radiographs using Telos device. Results: The Karlsson scale had improved significantly from preoperative average of 45.2 points to 89.4 points in single suture anchor group, and from 46.4 points to 90.5 points in double suture anchor group. According to the Sefton grading system, 15 cases (88.2%) in single suture anchor group and 18 cases (90%) in double suture anchor group achieved satisfactory results. The talar tilt angle and anterior talar translation had improved significantly from preoperative average of $13.6^{\circ}$ and 8.6 mm to $5.4^{\circ}$ and 4.1 mm in single suture anchor group, from $14.1^{\circ}$ and 8.4mm to $3.9^{\circ}$ and 4 mm in double suture anchor group. Double suture anchor technique was significantly superior in postoperative talar tilt. Conclusion: Single and double suture anchor techniques produced similar clinical and functional outcomes except for talar tilt, which was significantly superior in double suture anchor group. Both modified Brostrom procedures using the single and double suture anchor appear to be effective treatment methods for chronic lateral ankle instability. Further evaluation of clinical outcomes and biomechanical studies in athletes are needed.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.2
• /
• pp.61-68
• /
• 2011

Purpose: We evaluated the clinical outcome after arthroscopic repair in full thickness rotator cuff tears with and without delamination. Materials and Methods: From March 2006 to October 2008, we included 48 consecutive shoulders (31 males, 17 females; mean age 57.6 years; 45~68) who had arthroscopic double row repair for fullthickness tears of the rotator cuff. Mean rotator cuff tear size was 2.8 cm (range: 1.2~3.6) and the techniques of tendon-to-bone fixation varied according to the presence of delamination; separate row fixations of bursal and articular layer were used in delaminated tear. The mean follow-up was 26 months (range: 18~33) and functional and structural results were evaluated by American Shoulder and Elbow Surgeons (ASES), University of California at Los Angeles (UCLA) scale, isokinetic strength testing and magnetic resonance imaging (MRI) obtained mean 8 months (range:6~13) postoperatively. The patterns of delamination, age, sex, symptom duration, size of tear, satisfaction rate, retear rate ware compared and significance was set at p values < 0.05. Results: Postoperative functional shoulder score improved significantly in 44 shoulders (91.7%). Delamination was observed in 15 shoulders (31%) and it extended proximally and posteriorly in the majority of shoulders, and the articular layer was thicker (8/15, 53%) and more retracted (9/15, 60%) compared with the superficial bursal layer. Final follow up functional shoulder scores showed no differences between non-delaminated and delaminated tears and the presence of delamination had no correlations with sex, symptom duration, tear size and satisfaction rate, however, older age had more delaminated tears (p=0.041). Follow up MRI in 29 shoulders revealed that fourteen (48%) shoulders had complete healing; nine (31%), partial healing; six (21%), complete retear but the half of the retear group showed favorable clinical results. 79% (15/19) in non-delaminated tear and 80% (8/10) in delaminated tear were judged as healed tendon on MRI and double-layer double row repairs in delaminated tears resulted in nearly same rate of structural integrity of single-layer double row repairs (p=0.165). Conclusion: The incidence of delamination in our series was 31% and older age had more delaminated tears. Sex, symptom duration, preoperative size of the tear, functional results and satisfaction rate had no significant correlations with the presence of delamination. Nearly the same postoperative structural integrity was noted in both delaminated and non-delaminated tears.

• Journal of Distribution Science
• /
• v.9 no.2
• /
• pp.49-59
• /
• 2011

A franchise can be said to be the main method of distribution and marketing. It appears to be the future of the retail industry and is one of the world's fastest growing businesses sectors, as many policy reports and research results have acknowledged. Korea's franchise industry began in the 1970s, spread out into many areas (including food services, retail, and the service industry), and has grown by over 10% each year ever since. The industry's influence on the national economy becomes ever greater. Although the size of the franchise industry is expected to grow as it spreads and as the government expands its support, it has not yet attracted much academic interest. Research has so far been very fragmented. The main interest has been the relationship and conflicts between the head offices and the affiliates. No study has yet occurred on whether the concepts of satisfaction and intent to conclude a contract directly affect the success or failure of the affiliates. Few studies have empirically inquired into the demographic characteristics and abilities of the affiliates that significantly affect their results. Domestic franchise industries must prepare to leap from quantitative to qualitative growth. Most important is the need for affiliate headquarters and affiliates to build confidence between them. A friendly and reliable relationship between affiliate headquarters and affiliates will eliminate distrust from the franchise and maintain a healthy franchise system. This study suggests that current and prospective heads of affiliation should concentrate not on attracting affiliates but on investment and techniques of affiliate support. They should work on the reinforcement of brand power, the appropriate affiliate business environment, systematic education/training, taking burdens off the affiliate business persons, consolidating the relationship with the affiliate business persons, marketing mix factors (e.g. products, price conditions, logistics and shipping services, promotion, supervising and supervisor, operation procedures/processes, and material evidence); these all greatly affect the success or failure of the affiliate business. Supporting the affiliates is an important factor that enhances their results and satisfaction and consequently increases the positive recommendations to others and the ratio of recurrent conclusions of contracts, which ultimately generate the growth of the franchises. In addition, it is suggested that prospective franchise founders should make every effort to choose a good head office since the characteristics of the head office greatly influence the success of the affiliates. This study is significant in that it grasps the characteristics of the head office of affiliation and of the affiliates that influence affiliate results in ways not yet academically attempted.