• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.69-79
• /
• 2019

This study aims to seek knitting methods that can enhance the neck design of seamless knitwear and to find out how to improve the designs by comparing and analyzing the characteristics of the knitting methods used for v-neck pullovers. The investigator analyzed the characteristics of the knitting methods and assessed the wearing sensation by using six different pieces of clothing for the experiment. The results were analyzed based on a variance analysis (ANOVA). Among the items showing significant results, the Duncan-test was used for more intensive research. As a result, while using the basic pattern of knitting methods, Experiment Clothes A ended up binding on the back neckline, and not making the hem of back. Also, the neck was the widest. In the case of the special neck, Experimental Clothes B (1:1), which had the least number of the knitting course in relation to the knitting ratio, the bottom part of the back body had the most wrinkles. According to the result of wearing sensation, the front part, the side part, and the back part showed similar results (p<0.000) in all items. Specifically, the appearance of the Experiment Clothes A (normal) in both the front and rear aspects were evaluated as the best. In the case of the special neck, the Experimental Clothes F was ranked the highest, whereas the Experimental Clothes B (1:1) was ranked the lowest. Based on the results of the study, it seems possible to provide concrete and technical data for the planning of unique and productive designs. With regard to seamless knitwear neck designs, a comparative analysis of the knitting method of v-neck pullovers will be of practical use in the development and manufacturing of the product.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.81-86
• /
• 2013

Purpose: Recently, domestic and abroad consumption of mushroom has been increasing. Especially, oyster mushroom has been the most consumed product, sharing one third of the mushroom market. The air temperature differences between relative positions of the mushroom farms were needs to be minimal. However, in reality, the air temperature differences ranged from 2 to $5^{\circ}C$. Because of this, the mushrooms are non-uniform growth as well as decrease in both quality and quantity. Although air circulators have been employed by oyster mushroom farms to minimize air temperature differences, no experiments have been performed to illustrate the effect of the air circulators. Methods: This experiment is designed to analyze the effect of the air circulation by constructing a prototype air circulator and measuring the air temperature when the circulator was position at different heights (50 cm, 150 cm, 200 cm) from the floor in the center. Result: The horizontal plane air temperature of the first growing bed when the air circulator was installed 50cm above the floor in the center, once not using the air circulators and the other time using the air circulators, yielded the air temperature differences of $8.6^{\circ}C$ and $1.8^{\circ}C$ and deviations of 2.82 and 0.60, respectively. The third growing bed's air temperature differences were $10.0^{\circ}C$, $1.6^{\circ}C$ and deviations 3.28, 0.64, each respectively. These outcomes proved that the use of air circulators minimized the air temperature difference and deviation. The use of air circulators helped minimize the air temperature differences and the derivations in oyster mushroom farm. Conclusion: The use of air circulators helped balance the air temperature distribution in oyster mushroom farm.

• Archives of design research
• /
• v.4 no.1
• /
• pp.61-73
• /
• 1991

The exhibition activity that a company is rendering to their consumers for the purpose of advertisement, sales promotion and enhancement of company inage get more and more internationalized and specialized. A company is changing from mass production system to small quantity production of various kinds to meet consumer's individualization and differentiation. Also, a company is experiencing a major change in their marketing strategy. As the society is entering on Information Age, the contents that a company intends to give consumer may be different individually. If a consumer is informed wrong information of the goods, a company needs a place to meet consumer face to face where the consumer feels and understands the substance of the goods. This is the current characteristics of Exhibition Media. Based on the result of the current Special Exhibition home and abroad along with background and characteristics of special Exhibition, this study sets a following task reflecting the general trend of social, cultural and economic atmosphere. First, Current Exhibition Industry will be diversified into more Specialized Exhibition, while our Exhibition Industry is very shaky under severe international competition. Also, Exhibition Plan that involves with architecture, interior, graphic, industrial design and advertisement, etc., needs international competitiveness while enhancing identity of Exhibition Plan along with comprehensive marketing strategy in the future. Second, Among most of the local special Exhibitions which invite the general public are normally invited for company public relation contrary to those of U.S.A. and Europe. This signifies of our industrial and social structure's by-product. As the future exhibition become Information Com$$\mu$ication Exhibition which requires specialized technical explanation, the correct description of the goods should be set as a Judgement basis of Exhibition Plan. Third, In parallel with increase of the Exhibition, the equipment expenses of a company goes up continuously. In view of this, a study $$\mu$t be oriented for re-use and curtailment of expenditure of those equipment. Also, as the use of Assembly System B on the rise as a result of diversification of special Exhibition, a study on the development of new material & design for Exhibition Equipment only B required.

• Journal of the Korean Ceramic Society
• /
• v.50 no.5
• /
• pp.333-340
• /
• 2013

To fabricate spherical lithium titanate ($Li_2TiO_3$) pebbles which are used for a breeder material in fusion reactor, titanium oxide ($TiO_2$) granules were used as a starting material. The granules were pre-sintered, and then aqueous lithium nitrate solution infiltrated into the granules at vacuum condition. The granules were crystallized to $Li_2TiO_3$ after sintering under the control of process parameters. In this study, the concentration of lithium in the solution, as well as the number of penetration times and sintering temperature affected the final crystallite phase and the microstructure of the pebbles. In particular, the sphericity and size of the pebbles were effectively controlled by a technical rolling process. The useful spherical $Li_2TiO_3$ pebbles which have 10~20% porosity and 60~120 N compressive strength were obtained through the sintering at $1000{\sim}1100^{\circ}C$ in the multi-times infiltration process with 50 wt% solution. The physical properties of pebbles such as density, porosity and strength, can be controlled by a selection of $TiO_2$ powders and control of processing parameters. It can be thought that the lithium penetration method is a useful method for the fabrication of mass product of spherical $Li_2TiO_3$ pebbles.

• Clean Technology
• /
• v.10 no.2
• /
• pp.111-120
• /
• 2004

Manufacturing with a chemical for eco-friendly leather for nitrogen decrease of leather falling hair process waste water and the falling hair process that a number to decrease with sulfuration water decrease, a pollution load of COD, BOD. In this study manufactured lining agent and the unhairing assist product which did urea, mercaptan by basic matter. As a result of having dealt in hair saving process, compared, and was recalled by the existing hair burning process recovered hair, increased approximately 2times. Grain state to influence the yield that was quality of leather and an index of productivity evaluation, an improvement of contraction phenomenon (drawing) were possible. Is increased going seal, tear strength property of matter and softness and touch leather native nature in wet blue. Also, it is possible confirmation with decrease being more possible than about 50% COD, T-N density in a hair saving waste water.

• Membrane Journal
• /
• v.30 no.1
• /
• pp.9-20
• /
• 2020

Membranes are used in most processes of biopharmaceutical production. It is used for pretreatment of other processes, separation of impurities in the process, virus removal, control of products concentration and buffer solution exchange. Virus filters play an important role in ensuring product efficacy and stability because viral contamination of biopharmaceuticals for humans is a sensitive issue that is directly related to serious clinical outcomes. Virus filters typically have complex multilayer structures made of various polymers such as surface-modified PVDF, PES, CRC. Depending on the manufacturer, filters have different pore structures and shapes, such as symmetric or asymmetric, and is used in the form of pleated membrane, flat sheets or hollow fibers. Virus filters are exclusively supplied by few foreign companies such as Asahi Kasei, Millipore, Pall and Sartorius. Replacing virus filters can be time consuming and expensive, including approval from regulatory agencies through validation. As localization has become important due to Japan's recent export regulations, it is necessary to increase the degree of technical independence.

• The Journal of Korean Medicine
• /
• v.36 no.1
• /
• pp.61-74
• /
• 2015

Objectives: The main purpose of this study is to find a solution for modernized classification of herbal medicinal preparations in dual medical systems. Through this study, we expect to provide a reasonable foundation of herbal medicine for public health. Methods: We studied legal or technical terms of herbal medicinal preparations from the past regulations, and through this procedure, we could suggest clear definitions of terms for herbal medicinal preparations. We also investigated documents for approval of herbal medicinal preparation from US, EU(European union), The People's Republic of China, Japan, so that we can refer to them to revise regulation for appropriate use of herbal preparations. Results: In Korea pharmaceutical affairs act, any basis of 'Crude drugs' does not exist. But in some subordinary notifications, the way that they use the 'Natural product medicine' is used as a means of limiting basic rights of doctor or pharmacist of Korean medicine compared to doctor or pharmacist. At the same time, in subordinary notifications, provisions are vague and not enough for scientific evidence of Korean medicine. Thus, we re-categorized herbal medicinal preparations into new drugs, drugs made from herbal medicinal preparations and suggested requirements for drug approval. Conclusions: Instead of using the term 'Crude drug preparations', and we should use term 'Herbal medicinal preparations' in related act and notification. And also we suggest to amend subordinary regulations and documents for approval of herbal medicinal preparations. Through this, we can make herbal medicinal preparations be more industrialized.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.225-231
• /
• 2002

POSCO $\#2$ Stainless steel making plant produces more than 600 thousand ton per year with a variety of products consisting of austenite and ferrite stainless steel to meet custrmers' needs since 1996. The plant has four different major processes, that are, EAF-AOD-VOD-CC to finally produce semi-product called as slab. In this study, we importantly took AOD process into consideration due to its roles such as to check and verify the final qualities through sampling inspection. But the lead-time from sampling to its verification takes five to ten minutes causing produrtivity loss as muck as the lead-time as a result. Of all indices for quality and process control the plant has, carbon ingredient in liquid type of steel is the most important since it affects in a great way to the characteristics of steel, if any problem. customers not satisfied with quality could issue a claim; therefore there is no way hut to guarantee it before delivery. in this study, to reasonably reduce lead-time ran save a cycle time and finally improve our productivity from a state-or-art alternative just such as applying statistical model based on multi-regression analysis into the A.O.D line by analyzing the statistical and technical relationship between carbon and the relevant some vital independent variables. In consequence, the model with R-square $87\%$ allowed the plant to predict, abbreviating the process in relations to sampling to verification. approximately the value of [C] so that operators could run the process line with reliability on data automatically calculated instead of actual inspection. In the future, we are going to do the best to share this type of methodology with other processes, if possible, to apply into them.

• Korean Business Review
• /
• v.6
• /
• pp.135-152
• /
• 1993

The optional market segmentation pricing policy for rooms of hotels are investigated under the assumption of a linear demand function, and for four different situations: (1) single price market, (2) optimal segmentation of the unused capacity of a single-price-maeket, (3) optimal segmantation for all rooms, and (4) opimal segmentation for infiltration from higher priced to adjacent lower priced segments. The purpose of tis study is th show that with proper pricing policy, it would be possible to increase profits considerably. Such a profit increase might be achived by market segmentation coupled with product differentiation, where the different market segments are identified, sperated, and in each segment a different price per room is called for. The different prices are determined based on the specific price elasticity typical for each market segment and the relavant costs. The pricing model implied in this study is based on basic economic pricing theory and optimization techniques. While somewhat complex in its mathmatical solution, it can be easily programmed for use by practitioners, avoiding the need to cope with the technical aspects of the solution. In section II-1, the optimal single-market Single-price policy is evaluated. The optimal strategy under the constraint that only the previously unutilized rooms are segmented is analysed in section II-2, while the optimal strategy without this constraint is determined in section II-3. In section II-4, the optimal market-segmentation pricing policy is derived for the case in which market seperation is allowed for all the rooms under the assumption of custtomer infiltration from each market segment to the adjacent lower priced segment Finally, some considerations relating to the practicality of the model as a decision support tool and the requirements for its implementation are discussed in section III.

• Korean Business Review
• /
• v.11
• /
• pp.15-38
• /
• 1998

This study explores the evolution of technical innovation over time. It focuses on sectors of the information technology because this industry can be referred to as one of the most dynamic industries of all times. Following evolutionary theorists, we argue that technological change is gradual and that superior firms and technologies are reward by the' selection' environment. In the initial phase of the industry life cycle, technological change is expected to be radical and uncertainty is high. Over time a product or technology is likely to arise which stands out above all other products or technologies. These so-called 'basic designs' serve as sorts of 'technological guideposts' for further developments in the technology. Once a basic design established, technological progress tends to follow consistent paths or trajectories. The cumulative character of technological progress facilitates a rapid expansion of the boundaries of the technology until the natural limits of the technology are approached and technological progress slows down. Following ecological theories, supply-side developments in the industry are described on the basis of five different organizational types. On the basis of this pattern of market and technological evolution we came up with seven basic propositions.