• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.413-415
• /
• 2006

In this article, we tried to find out the potential of new PVAm (Polyvinylamine) Polymer for optimizing Retention and Drainage system. From the mill experimental in Carton board mill, we could find out PVAm can reduce a significant chemical cost with preserving Drainage. Another case of Newsprint laboratory survey, we could find out the formation benefits from optimizing PAM system to PAM + PVAm dual system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.1033-1034
• /
• 2006

The paper demonstrates OFDM with LDPC and adaptive modulation applied to Multiple-Input Multiple-Output (MIMO) system. An optimization algorithm to obtain a bit and power allocation for each subcarrier assuming instantaneous channel knowledge is used. The experimental results are shown the potential of our proposed system.

• 농업생명과학연구
• /
• 제45권3호
• /
• pp.35-41
• /
• 2011

이 연구에서는 지리적 여건 및 임업경영 여건을 고려하여 우리나라의 목재공급 잠재량을 예측하고자 하였다. 현실적으로 목재생산이 가능한 지역을 추출하기 위하여 목재생산지를 자연적, 이론적, 지리적, 기술적 목재생산지로 구분하여 분석을 수행하였다. 먼저 수치임상도를 이용하여 전체 산림으로부터 입목지를 추출하여 자연적 목재생산지를 구분하였다. 다음으로 법정용도지역, 경사도, 하천 그리고 도로 여건을 고려하여 이론적, 지리적, 기술적 목재생산지를 추출하였다. 입목축적량을 산출하기 위하여 수치임상도의 수종 및 영급에 대한 속성자료를 이용하였으며, 기술적 목재생산지에 대한 임목축적량을 산출함으로써 목재공급 잠재력을 평가하였다. 각 유형별 목재생산지에 대한 자원량을 산출한 결과는 244,150천$m^3$에서부터 596,248천$m^3$에 이르기까지 자원량의 편차가 크게 나타나 지리적 여건 및 임업경영 여건의 고려 수준에 따라 잠재력이 고평가 혹은 저평가 될 수 있는 것으로 나타났다. 지역별 목재공급 잠재량을 분석한 결과에서는 경상북도, 전라남도, 경상남도, 강원도의 순으로 잠재량이 높은 것으로 평가되었다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.310-313
• /
• 2008

The wind resource potentials of South Korea are estimated as preliminary stage using the national wind map which has been being established by numerical wind simulation and GIS (Geographical Information System) exclusion analysis. The wind resource potentials are classifying into theoretical, geographical, technical and implementation potentials and the calculation results are verified by comparing to other countries' potentials. In GIS exclusion, urban, road, water body, national parks and steep slope area are excluded from onshore geographical potential while water depth and offshore distance from the shoreline are applied s offshore exclusion conditions. To estimate implementation potential, dissemination records of European countries are adopted which is about 1/8 of geographical potential.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권10호
• /
• pp.201-210
• /
• 2020

This study aimed to analyze the influence of the industrial growth and the effect on government tax potential of the South Sulawesi Province. The growth of the tax object affects government tax potential of South Sulawesi Province. Environmental resources affect government tax potential of the province. The study used multiple linear regressions on primary data. The population consisted of all officers and staff involved in regional work units. Revenue Service area in South Sulawesi Province counts 630 employees. The sampling method is purposive sampling random carried out based on specific objectives. The respondent qualifications are taken from the Technical Implementation Unit Office and the Department of Revenue. The number of respondents is 96 from the Head of UPTD and three of them are related with tax Section Chief Officer. The results showed that industrial growth has a significant and positive effect on the potential increase in tax of South Sulawesi. Growth in tax object significantly affects the potential increasing tax of South Sulawesi. Environmental resources significantly affect the potential Increase in tax. Practical recommendations for local government is to enhance tax potential, reduce bureaucracy in industrial licensing, and facilitate local farmers to get involved in economic contributions.

• Korean Journal of Radiology
• /
• 제20권6호
• /
• pp.880-893
• /
• 2019

Objective: To assess the technical performance of two-dimensional shear wave elastography (2D-SWE) for measuring liver stiffness. Materials and Methods: The Ovid-MEDLINE and EMBASE databases were searched for studies reporting the technical performance of 2D-SWE, including concerns with technical failures, unreliable measurements, interobserver reliability, and/or intraobserver reliability, published until June 30, 2018. The pooled proportion of technical failure and unreliable measurements was calculated using meta-analytic pooling via the random-effects model and inverse variance method for calculating weights. Subgroup analyses were performed to explore potential causes of heterogeneity. The pooled intraclass correlation coefficients (ICCs) for interobserver and intraobserver reliability were calculated using the Hedges-Olkin method with Fisher's Z transformation of the correlation coefficient. Results: The search yielded 34 articles. From 20 2D-SWE studies including 6196 patients, the pooled proportion of technical failure was 2.3% (95% confidence interval [CI], 1.3-3.9%). The pooled proportion of unreliable measurements from 20 studies including 6961 patients was 7.5% (95% CI, 4.7-11.7%). In the subgroup analyses, studies conducting more than three measurements showed fewer unreliable measurements than did those with three measurements or less, but no intergroup difference was found in technical failure. The pooled ICCs for interobserver reliability (from 10 studies including 517 patients) and intraobserver reliability (from 7 studies including 679 patients) were 0.87 (95% CI, 0.82-0.90) and 0.93 (95% CI, 0.89-0.95), respectively, suggesting good to excellent reliability. Conclusion: 2D-SWE shows good technical performance for assessing liver stiffness, with high technical success and reliability. Future studies should establish the quality criteria and optimal number of measurements.

• Advances in Computational Design
• /
• 제4권1호
• /
• pp.43-52
• /
• 2019

Variation Analysis (VA) is used to simulate final product variation, taking into consideration part manufacturing and assembly variations. In VA, all the manufacturing and assembly processes are defined at the product design stage. Process Capability Data Bases (PCDB) provide information about measured variation from previous products and processes and allow the designer to apply this to the new product. A new challenge to this traditional approach is posed by the Industry 4.0 (I4.0) revolution, where Smart Manufacturing (SM) is applied. The manufacturing intelligence and adaptability characteristics of SM make present PCDBs obsolete. Current tolerance analysis methods, which are made for discrete assembly products, are also challenged. This paper discusses the differences expected in future factories relevant to VA, and the approaches required to meet this challenge. Current processes are mapped using I4.0 philosophy and gaps are analysed for potential approaches for tolerance analysis tools. Matching points of simulation capability and I4.0 intents are identified as opportunities. Applying conditional variations, incorporating levels of adjustability, and the un-suitability of present Monte Carlo simulation due to changed mass production characteristics, are considered as major challenges. Opportunities including predicting residual stresses in the final product and linking them to product deterioration, calculating non-dimensional performances and extending simulations for process manufactured products, such as drugs, food products etc. are additional winning aspects for next generation VA tools.

• 실천공학교육논문지
• /
• 제11권2호
• /
• pp.259-268
• /
• 2019

이 연구의 목적은 3 연속 사이클 교육과정과 통합 기술교육 클러스터를 기반으로 직업인을 양성하는 이집트의 직업교육 학제를 탐색함으로써 한국 직업교육 체제에 시사점을 제안하는 것이다. 이집트의 직업교육은 진학을 목적으로 하는 일반 보통교육과 노동시장 입직을 목적으로 하는 직업교육의 학제가 이원화되어 운영된다는 점에서 한국의 학제와 체제는 유사하다. 그러나, 중등 직업교육, 고등 직업교육, 대학 수준의 고급 기술교육을 통합한 3연속 사이클 교육과정을 운영하고, 이러한 교육과정 운영의 효과성을 높이기 위해 동일한 물리적 공간에 집적된 통합 기술교육 클러스터를 활용하며, 일부 유럽 국가들과 협력시스템을 구축하여 직업교육의 품질을 관리하는 점 등에서는 차이가 있다. 본 연구 분석을 통해 이집트의 직업교육 학제를 구체적으로 제시하고, 한국 직업교육의 질적 제고를 위한 다양한 혁신방안들을 제안하였다.

• 한국해양바이오학회지
• /
• 제4권1호
• /
• pp.6-10
• /
• 2010

Indonesia is well-known as biggest producer of seaweed especially for Eucheuma and Gracilaria and also has huge potential resources and capability to develop seaweed cultivation and product. There are several provinces which have potential resources and have been contributing on seaweed production. The next challenge about seaweed production is using integrated system on brackishwater and marine aquaculture. Furthermore, about 2,000,000 ton of potential seaweed production is not explored yet. This article also tries to figure out some related aspects which are technical, economical and forecasting aspect. There is a disease which named "ice-ice" is one of the main problem and giving a new challenge in developing of problem solving for seaweed cultivation method. Economical parameters are also main important key to find out the feasibility of seaweed cultivation industry. In addition, the seaweed cultivation and production in Indonesia also have potential performance on biofuel resources as a part for solving the world problem on energy demand.

• Journal of Astronomy and Space Sciences
• /
• 제39권3호
• /
• pp.99-108
• /
• 2022

There are two models that explain the rotation curves of galaxies: dark matter, which gives the missing contribution to the gravitational potential of the standard theory of gravity, and modified theories of gravity, according to which the gravitational potential is created by ordinary visible mass. Both models have some disadvantages. The article offers a new look at the problem of galactic rotation curves. The author suggests that the moment of inertia creates an additional gravitational potential along with the mass. The numerical simulation carried out on the example of fourteen galaxies confirms the validity of such an assumption. This approach makes it possible to explain the constancy of gas velocities outside the galactic disk without involving the hypothesis of the existence of dark matter. At the same time, the proposed approach lacks the disadvantages of modified theories of gravity, where the gravitational potential is created only by the mass of visible matter.