• The Journal of Fisheries Business Administration
• /
• v.41 no.3
• /
• pp.45-58
• /
• 2010

This study estimated the technical efficiency of coastal composite fishery in Korea by using the data envelopment analysis (DEA) and the stochastic frontier analysis (SFA) methods, and the results on the respective method were compared. In the DEA method, the constant returns to scale (CRS) and the variable returns to scale (VRS) output-oriented DEA models were separated and technical efficiencies were estimated, respectively. The average estimated value of technical efficiency by the SFA method (0.633) was found to be lower than that by the VRS-DEA method (0.738), while it was higher than that by the CRS-DEA method (0.479). It was found that strong correlation exists between the SFA method and the VRS-DEA method. The method which can utilize both methods in mutually complementing way for the estimation of technical efficiency was also considered.

• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.179-193
• /
• 2006

Technical efficiency of semiforcing watermelon growers is 0.8248 on average, and distributed between 0.6744 and 0.9268. The result showed that semiforcing watermelon growers had by 18% of technical inefficiency and could be assumed that increasing technical efficiency could induce watermelon production more increase. Consequently, if growers' technical efficiency were improved while other environments were constant, watermelon production could be increased. Following the results from the inefficiency effect model, all assumption coefficient such as growers age etc, are significant at 10% level. Estimate of dispersion parameter ${\gamma}$ is 0.89, which confirms those differences between practical output and frontier output were derived from the technical efficiencies among growers. Differences of production system between high and low level growers in production efficiency were showed at side altitude, ventilation and heat-retaining in section of facilities and automation, soil test and calcium application in section of environment management, transplant preparation and duration of pollination in section of crop management and shipment place, sorting degree and management record analysis in section of business management respectively. As a result of analyzing consulting data by using standard diagnosis table of watermelon cultivation under structure which cultivated on semi-forced watermelon growers, gap between high and low level growers was 7.0 points in facility automation section, 7.1 points in environment section, 8.8 points in crop management section and 13.6 points in business management section, respectively, which were the biggest one among them. In case of excluding information-related items from the evaluation index of business management section, changes of business achievement are to occur. Therefore, it is recommended for us to review the standard diagnostic table of watermelon cultivation under structure by dividing evaluation index of management section into management and information.

• Journal of Technology Innovation
• /
• v.19 no.1
• /
• pp.1-27
• /
• 2011

This paper aims to measure and analyze R&D productivities and efficiencies of 17 major OECD countries including Korea over the 1984-2008 period by using the Malmquist Productivity Index and Data Envelopment Analysis, classifying R&D performance into an output and outcome aspects. It also searches the Korea's current status and characteristics in each R&D stage to enhance Total Factor Productivity (TFP) compared with other developed countries. Our major findings are the followings: (i) Korea's productivity index of R&D input vis-a-vis R&D output is very high (13.39% annual growth rate) compared with those of major advanced countries, whereas the annual average of efficiency index is very low (0.33), i.e. Korea's technical efficiency index has risen to 0.83 at the last time series started at 0.10 point and come up to the level of major advanced countries. (ii) the Korea's productivity index of R&D output vis-a-vis R&D outcome is very low (14.02% annual reduction rate) compared with those of major advanced countries, whereas the annual average of efficiency index is very high (0.22), i.e. Korea's integrated frontier technical efficiency index has dropped to 0.057 at the last time series started at 1.00 point and coming up to the level of major advanced countries. (iii) The productivity of R&D input vis-a-vis R&D outcome is positively correlated with that of R&D output vis-a-vis R&D outcome and the growth of R&D input factors. In a nutshell, it implicates that the effort to take advantage of R&D outputs, namely establishing the diffusion and commercialization system of technical knowledge to the level of developed countries, should be strengthened over that on the growth of R&D investment and output for enhancing R&D productivity and efficiency in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.509-517
• /
• 2020

This study evaluated the importance of technical characteristics in manufacturing street furniture using 3D printing technology to suggest the direction of development of high priority 3D printing technology. The importance was analyzed by the QFD, quantified by scores and the priority of the items was summarized. As a result, the 'output size', 'shrinkage of material', and 'output angle' were derived as technical elements that should be prioritized in development and research. For verification, the design of atypical street furniture was made into a large 3D printed output and the development direction was suggested by applying the technical elements of priority during the manufacturing process. Street furniture should be designed based on functionality and stability, as well as economic efficiency, productivity, and aesthetics. Therefore, the 'output size' ensured stability by minimizing the division of parts, and the 'contractability of materials' satisfied the aesthetic and productivity by minimizing the error of form. Finally, the 'output angle' was verified by improving the quality of the output and selecting an angle with efficient and structural stability through various output angles.

• Structural Monitoring and Maintenance
• /
• v.1 no.2
• /
• pp.159-171
• /
• 2014

Real-time near and far-field monitoring of concrete structural components gives enough information on the time and condition at which damage occurs, thereby facilitating damage detection while in the same time evaluate the cause of the damage. This paper experimentally investigates an integrated monitoring technique for near and far-field damage detection in concrete structures based on simultaneous use of electromechanical admittance technique in combination with guided wave propagation. The proposed sensing system does not measure the electromechanical admittance itself but detect time variations in output voltages of the response signal obtained across the electrodes of piezoelectric transducers bonded on surfaces of concrete structures. The damage identification is based on the spectral estimation MUSIC algorithm. Experimental results show the efficiency and performance of the proposed measuring technique.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.59-60
• /
• 2022

본 논문에서는 유아 영어 단어 학습 애플리케이션을 설계하고 구현한다. 이 애플리케이션은 키넥트 센서의 음성 인식 기능을 활용하여 동물과 음식 분야의 단어 학습 기능을 제공한다. 화면에 출력된 이미지에 해당하는 영어 단어를 말하면 키넥트 센서에서 그 음성을 인식하여 해당 단어의 발음이 정확한지 판별한다. 주어진 시간 내에 다양한 단어를 정확하게 발음함으로써 높은 점수를 취득하도록 구현한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.2
• /
• pp.94-97
• /
• 2018

Lead zirconate titanate/poly-vinylidene fluoride (PZT/PVDF) piezoelectric devices were fabricated by incorporating carbon nanotubes (CNTs), for use as flexible energy harvesting devices. CNTs were added to maximize the formation of the ${\beta}$ phase of PVDF to enhance the piezoelectricity of the devices. The phase transition of PVDF induced by the addition of CNTs was confirmed by analyzing the X-ray diffraction patterns, scanning electron microscopy images, and atomic force microscopy images. The enhanced output efficiency of the PZT/PVDF piezoelectric devices was confirmed by measuring the output current and voltage of the fabricated devices. The maximum output current and voltage of the PZT/PVDF piezoelectric devices was 200 nA and 350 mV, respectively, upon incorporation of 0.06 wt% CNTs.

• Journal of Technology Innovation
• /
• v.11 no.2
• /
• pp.151-173
• /
• 2003

This paper analyses the efficiency and productivity of R&D system across time (1991${\sim}$2000) and 16 OECD countries using multi-output and multi-input non-parametric frontier methods such as DEA (data envelopement analysis) and Malmquist productivity indexes. Malmquist productivity indexes are decomposed into two components measures, namely technical change and efficiency change. To calculate R&D efficiency and productivity, we used R&D stock and the number or researchers as R&D input proxies and the number of adjusted SCI papers and U.S. patent applications as R&D output proxies. Empirical result shows that Switzerland, Canada, U.S., Australia's R&D efficiencies are the highest and Korea's R&D productivity growth is the highest in the sample for the period. Technical efficiency growth was a more important source of productivity growth than technological innovation.

• Journal of Multimedia Information System
• /
• v.2 no.4
• /
• pp.317-326
• /
• 2015

The paper deals with the analysis of the effectiveness of acoustic emission monitoring and diagnostics of engineering products. We discuss the results of the processing results of the field experiment to study the acoustic emission in the alloy and its welded joints in the presence of technological defects. We study the characteristics of the output of acoustic emission signals at different stages of elastic-plastic deformation of alloys. Analyzed acoustic chart and the output waveform of the acoustic emission for the different types of welds. Studies have shown the effectiveness of the Acoustic emission techniques and help improve the accuracy of non-destructive testing systems in problems of automation and control.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.359-369
• /
• 2014

Due to the severe market conditions, pre-entrepreneur seeks to start their business through franchise company. This paper, using the data envelopment analysis(DEA) method, examines efficiency of a group of franchise company in order to provide efficiency information with pre-entrepreneur. Output-oriented DEA model is applied in the investigation of efficiency, and the overall efficiency score is decomposed into pure technical efficiency and scale efficiency. The input variables selected to evaluate the efficiency are franchise deposit, franchise contribution cost and the output variables are sales and number of franchises, and length of business. The results of this paper show franchise industry have the low level of overall efficiency and the main sources of inefficiency is found technical rather than scale. As a result, this paper provides not only the current status of efficiency information of a franchise with pre-entrepreneur but also give warning when they sign-up with franchise business.