• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.488-493
• /
• 2020

The demand for hydrogen, which is considered an environmentally friendly energy source, is increasing, and at the same time, the fuel cell market is increasing continuously. This study aimed to establish a strategy for securing intellectual property rights on fuel cell by-product utilization technology for operating expenditure reduction of hydrogen-powered residential buildings. In this patent analysis, this study investigated Korean, American, Japanese, and European patents filed/published/registered by October 2019 and established a technical classification system and classification criteria through expert discussion. To reduce the operating expenditure of hydrogen-powered residential buildings, intellectual property rights will be improved using systems and methodologies involving cathode-side purified air, product water, and oxygen-depleted air captured with the dead-end mode operation of polymer electrolyte fuel cells.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.538-544
• /
• 2021

Technology readiness assessment is a procedure for managing defense project risk factors based on the preemptive identification of technical risks. Under current regulations, technology readiness is determined based on considerations of the ratings of factors itemized on a checklist, whether unsatisfied factors have a fatal impact on the project, and whether countermeasures for unsatisfied factors have been established. However, objective criteria for assessing the impact of unsatisfied factors have not been presented, and thus, at present, the results of technology readiness level determinations are largely subjective. In addition, the importance of questions on the checklist is dependent on individual project characteristics and this is not considered during the assessment process. In this paper, we propose an improved technology readiness assessment procedure that considers the characteristics of each project. Using the proposed procedure, we quantitatively determined the importance of each checklist item using a weighting method. We found the devised procedure improved the reliability and objectivity of technology readiness assessment results. A case analysis of a complex weapons system is presented to demonstrate these improvements.

• Journal of Convergence for Information Technology
• /
• v.11 no.4
• /
• pp.83-101
• /
• 2021

This study is to investigate, using AHP, what technologies should be applied first to Korean SMEs in order to respond to the 4th industrial revolution and change to a smart enterprise. To this end, technologies related to the 4th industrial revolution and smart factory are synthesized, and the classification criteria of Dae-Hoon Kim et al. (2019) are applied, but additional opinions of experts are collected and related technologies are converted to artificial intelligence (AI), Big Data, and Cloud Computing. As a base technology, mobile, Internet of Things (IoT), block chain as hyper-connected technology, unmanned transportation (autonomous driving), robot, 3D printing, drone as a convergence technology, smart manufacturing and logistics, smart healthcare, smart transportation and smart finance were classified as smart industrial technologies. As a result of confirming the priorities for technical use by AHP analysis and calculating the total weight, manufacturing companies have a high ranking in mobile, artificial intelligence (AI), big data, and robots, while service companies are in big data and robots, artificial intelligence (AI), and smart healthcare are ranked high, and in all companies, it is in the order of big data, artificial intelligence (AI), robot, and mobile. Through this study, it was clearly identified which technologies should be applied first in order to respond to the 4th industrial revolution and change to a smart company.

• PNF and Movement
• /
• v.21 no.2
• /
• pp.171-183
• /
• 2023

Purpose: The purpose of this study was to compare universal goniometry (UG), which is commonly used in clinical practice to measure the range of motion (ROM) of finger joints with a wearable soft sensor glove, and to analyze the reliability to determine its usefulness. Methods: Ten healthy adults (6 males, 4 females) participated in this study. The metacarpophalangeal joint (MCP), interphalangeal joint (IP), and proximal interphalangeal joint (PIP) of both hands were measured using UG and Mollisen HAND soft sensor gloves during active flexion, according to the American Society for Hand Therapists' measurement criteria. Measurements were taken in triplicate and averaged. The mean and standard deviation of the two methods were calculated, and the 95% limits of agreement (LOA) of the measurements were calculated using the intraclass correlation coefficient (ICC) and Bland-Altman plot to examine the reliability and discrepancies between the measurements. Results: The results of the mean values of the flexion angles for the active range of motion (AROM) of the finger joints showed large angular differences in the finger joints, except for the MCP of the thumb. In the inter-rater reliability analysis according to the measurement method, the ICC (2, 1) value showed a low level close to 0, and the mean difference by the Bland-Altman plot showed a value greater than 0, showing a pattern of discrepancy. The 95% LOA had a wide range of differences. Conclusion: This study is a preliminary study investigating the usefulness of the soft sensor glove, and the reliability analysis showed a low level of reliability and inconsistency. However, if future studies can overcome the limitations of this study and the technical problems of the soft sensor glove in the development stage, it is suggested that the measurement instrument can show more accurate measurement and higher reliability when measuring ROM with UG.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.33 no.1
• /
• pp.425-454
• /
• 2022

This study analyzed the 77 most popular sexuality education books for children and young adults published in Korea, based on various criteria, including subject matters, format, implied readers, and author's occupational background. Among the key topics of the International technical guidance on sexuality education developed by UNESCO, the most mentioned was that it is natural to have curiosity on one's own feelings and body and that sex education books can help them learn about them. Respect on one's own body, knowledge of sexual and reproductive organs, eggs and sperms, menstrual cycle, effect of hormones were also easily found topics from the books. The least mentioned topics were HIV/AIDS and Gender-based violence. 63.5% of the analyzed books were books with/without illustrations. Other formats include picture books, comic books, and photo-illustrated books. Publication of books aimed for particular gender started to increase from 2019. Diversity of authors' occupation were also shown starting 2019. Further research on the role of sex education books is crucial to help all children and young adults develop their own sexuality and understand that of other people, and ultimately to live in a harmonious society.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.93-102
• /
• 2023

Objectives: With the evolution of direct reading sensors, it is possible to monitor several substances through telecommunication. However, there are some limitations on the use of direct reading technologies in the Occupational Safety and Health Act in South Korea, which only applies to detector tubes, noise, heat, and carbon monoxides. The number of chemicals and their amount of use have been continuously increasing in South Korea. The Ministry of Employment and Labor (MoEL) has concerns about worker's health because exposure is only covered for about 1.2% of all distributed chemicals. Using a direct reading monitor with photoionization detectors (PID-DRMs), gases and vapors chemicals can be measured. Based on the data, business owners are able to create corrective strategies, provide better working routines, and select correct respiratory equipment. PID-DRMs are less expensive and easier to handle for an owner voluntarily controlling chemicals emitted in the workplace. However, there are several limitations on using these PID-DRMs to the degree that the MoEL has not been able to select a legal monitor. The aim of this study was to review previous studies related to PID-DRMs and identify the characterization and limitation on PID-DRMs. Methods: To search for related studies on PID-DRMs, key words were used including direct reading monitors/instruments and/or photoionization detectors. Through that, four domestic and 15 international studies were reviewed. Results: Studies on PID-DRMs were conducted by chamber (enclosed, dynamic, walk-in) and in the field (experimental environment, actual environment). The concentration of PID-DRMs and charcoal tubes were compared for a single substance or mixture, or within the PID-DRMs. There was a high correlation between the two concentrations, but it did not meet the accuracy criteria (95% confidence interval, within 25%) of the NIOSH technical report (2012). In addition, differences in measured values occurred according to environmental factors (temperature, humidity) and high concentration, and concentration values tended to be underestimated due to contamination of the sensor. As a way to improve the accuracy of PID concentration, it was proposed to use correction factors, charcoal tube-based correction factors, or to calibrate the PID-DRMs in the same environment as the workplace. Conclusions: PID-DRMs can likely be used by business owners for the purpose of voluntarily managing the workplace environment, and it is expected that it will be possible to use them as legal equipment if a PID sensor can be upgraded and the limitations of the sensor (temperature, humidity, high concentration evaluation, sensor pollution) can be overcome in the near future.

• Informatization Policy
• /
• v.30 no.4
• /
• pp.113-137
• /
• 2023

This study aims to conduct the classification of Government as a Platform (GaaP) in a situation where the concept of GaaP can be diversely recognized. This is because inclusiveness and ambiguity in the concept of GaaP can hinder policy enforcement by working-level officials in the public sector. It drew the criteria for classification for GaaP based on literature and cases for GaaP. In the technical aspect, considering data as an overarching factor, the integrated system platform integrating the information system or websites of the public sector and the data platform as a single portal for open data to external stakeholders were sorted. In the governance aspect considering stakeholder as an overarching factor, the communication platform utilized for interaction between public and private sectors and the co-creation platform that encourages public-private partnership to create innovative outcomes were sorted. It suggested an actual implementation case and the policy implication according to each type of GaaP. Additionally, according to the classification of GaaP, it conducted contents analysis as to which type of GaaP the domestic Digital Platform Government belongs to based on its detailed assignment. Based on the classification of GaaP, it drew balanced implementation for various types of GaaP, plan for promoting the participation and collaboration of stakeholders, and necessity of restructuring and reinventing of the public sector as policy implications for the domestic digital platform government.

• Journal of Korean Library and Information Science Society
• /
• v.55 no.1
• /
• pp.193-214
• /
• 2024

This study aimed to propose a method for collecting and applying media platform based materials at the National Library of Korea. Firstly, we analyzed the current status and limitations of data collection based on domestic media platforms, including the National Library of Korea. Secondly, a literature review method was used to investigate the current status and types of digital content based on media platforms. Thirdly, we identified the types of materials based on media platforms that are not currently included in the National Central Library's online material collection guidelines through the examination of cases from major overseas libraries. Fourthly, after reviewing technical and legal elements such as the definition of collection targets and scope for each new media, and collection methods, we established collection criteria. Fifthly, based on the research results, the policies proposed in this study are as follows: 1) there is a need to establish a clear legal basis for the collection of media platform based materials; 2) the development and presentation of collection guidelines for media platform based materials is necessary; 3) the development of collection tools and infrastructure for media platform based materials is required; 4) for the collection of media platform based materials, it is necessary to obtain permission for collection from targeted social media organizations, and to cooperate in linkage with organizations that produce and service extended reality content; 5) for the service activation of media platform based materials, it is necessary to improve accessibility for the usage activation of these materials, to enhance the content extensibility and ease of use of the e-deposit system including extended reality content, and to advance and construct spaces for reproducing extended reality content.

• Korean Security Journal
• /
• no.44
• /
• pp.7-35
• /
• 2015

The objective of this article is to inform and document the contemporary development of the private security industry in Queensland Australia, a premier holiday destination that provide entertainment for the larger region. The purpose of this review is to examine the comtemporary development of mandated licensing regimes regulating the industry, and the necessary reform agenda. The overall aim is threefold: first, to chart the main outcomes of the two-wave of reforms since the mid-'90s; second, to examine the effectiveness of changes in modes of regulation; and third, to identify the criteria that can be considered a best practice based on Button(2012) and Prenzler and Sarre's(2014) criteria. The survey of the Queensland regulatory regime has demonstrated that, despite the federal-guided reforms, there remain key areas where further initiatives remain pending, markedly case-by-case utilisation of more proactive strategies such as on-site alcohol/drug testing, psychological evaluations, and checks on close associates; lack of binding training arrangement for technical services providers; and targeted auditing of licensed premises and the vicinity of venues by the Office of Fair Trading, a licensing authority. The study has highlighted the need for more determined responses and active engagements in these priority areas. This study of the development of the licensing regimes in Queensland Australia provides useful insights for other jurisdictions including South Korea on how to better manage licensing system, including the measures required to assure an adequate level of professional competence in the industry. It should be noted that implementing a consistency in delivery mode and assessment in training was the strategic imperative for the Australian authority to intervene in the industry as part of stimulating police-private partnerships. Of particular note, competency elements have conventionally been given a low priority in South Korea, as exemplified through the lack of government-sponsored certificate; this is an area South Korean policymakers must assume an active role in implementing accredited scheme, via consulting transnational templates, including Australian qualifications framework.

• Journal of The Korean Association For Science Education
• /
• v.24 no.3
• /
• pp.519-531
• /
• 2004

In recent years, there has been an increased emphasis on performance assessment to evaluate students' abilities. Our nation has introduced a change in testing and assessment. Additional work on the efficacy, reliability, and comparability in order to develop the performance assessment item has been needed in the enforcement of the 7th National Science Curriculum. Also, criteria for professional and technical standards has been needed to be developed. The purpose of this study was to draw out various key concepts and to develop achievement standards, assessment standards and performance assessment items based on the 7th National Science Curriculum on the subject matter of reproduction(chapter 13) and biological accumulation(chapter 17). And also, this study examined the validity of completed performance assessment items based on classical test theory and polytomous item response theory. Twelve key concepts in chapter 13(reproduction) and four from chapter 17(biological accumulation) were abstracted. Twenty-six achievement standards in chapter 13(reproduction), and nine in chapter 17(biological accumulation) were developed. The achievement standards were determined in terms of knowledge(K), process skill(P) and attitude(A). Twenty-five assessment standards in chapter 13(reproduction) and nine in chapter 17(biological accumulation) were developed. Based on the developed achievement standards and assessment standards, twenty-two performance assessment items(seventeen open-ended questions, three essays, and two portfolios) with concrete grading criteria were developed. Eight open-ended items were applied to 240 10th graders to evaluate reliabilities of the test which consisted of four items per each chapter. The results would be suggested that the applied items were valid for performance assessment because item difficulties and item discriminations were proper. There was not much differences in item discrimination between interpretation from classical test theory and that from polytomous item response theory. However, there were some differences in item difficulties between the interpretations of two theories because the characteristics of examinees were reflected in classical test theory.