• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.235-239
• /
• 2008

Cable systems are a construction of elements carrying only tension and no compression or bending in membrane structure. Tensile membrane structures are most often used as roofs as they can economically and attractively span large distances. But cable systems have weaknesses to vibration by earthquake, wind and vehicle loads. Damage detection of cable systems by using existing safety diagnosis is difficult to detect the characteristic change of overall structural action. If cable snaps are occurred to cable release and tear in tension structures, these are set up a vibration. So, we used piezo-electric materials, and The principle of operation of a piezoelectric sensor is that a physical dimension, transformed into a force, acts on two opposing faces of the sensing element. In this study, the development on test method of cable system is proposed and tested by tensile strength using piezo-electric materials.

• Fibers and Polymers
• /
• v.2 no.1
• /
• pp.152-156
• /
• 2001

Three different silicone polymer systems, such as aminofunctional, epoxyfunctional, and hydrophilic epoxyfunctional silicone polymers, were applied onto plasma pretreated wool fabric to improve the dimensional properties. The results showed that the plasma pretreatment modified the cuticle surface of the wool fiber and increased the reactivity of wool fabric toward silicone polymers. Felting shrinkage of plasma and silicone treated wool fabric was decreased with different level depending on the applied polymer system. Fabric tear strength and hand were adversely affected by plasma treatment, but these properties were favorably restored on polymer application. Therefore, it has been concluded that the combination of plasma and silicone treatments can achieve the improved dimensional stability, and better performance properties of wool fabric. The surface smoothness appearances of treated fabrics were measured using a new evaluation system, which showed good correspondence with the results of KES-FB4 surface tester.

• Journal of Korean Society for Quality Management
• /
• v.16 no.1
• /
• pp.43-48
• /
• 1988

Most of silicone used for water repellent finish is MHP (methyl hydrodiene polysiloxane), which is formed by hydrolysis and condensation polymerization of MHD (methyl hydrodiene dichlorosilane: Me H Si $Cl_2$). The cross-linking theory explains the water repellent mechanism of MHP. The silicone finish on fiber could improve in handle, softness, abrasion resistance, soil repellency, tear strength and crease resistance, as well as water repellency. According to using method silicone-water repellent finishing agents, could be devided into air dry type and curing type. MHP is the typical curing type of water repellent finishing agent, and this type requires the curing temperature above $150^{\circ}C$ at least. High curing temperature is the very drawback of this curing type. For this reason, there has been global interest in the lowering of its temperature. The objective of this study is to investigate merits of alkali treatment for silicone finishing by ANOVA and LSD (least significant difference).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.8-17
• /
• 2005

WCT (Wet compaction test) is a new fiber evaluation method developed recently by Seo and its test results can be used as a predictor for pulp quality and its paper property Bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) were used for the furnishes to be tested by WCT We compared the WCT results to conventional fiber evaluation tests such as WRV (Water Retention Value), free ness, and fiber length in this study, and found that WCT always gave better regression coefficients in relation to pulp quality (drainage), and paper properties (density, tensile, tear, and burst strength). WCT may be used on-line in papermachine.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.2
• /
• pp.61-66
• /
• 2002

This study was carried out to investigate sheet properties of Indian mallow hanji, made by different pulping methods such as alkali and sulfomethylated pulpings, and different stock compositions, various mixing ratios of bast fiber and woody core fibers. Effect of morphological properties of pulp stocks on the sheet formation and their optical properties were also evaluated using an image analyzer and confocal laser scanning microscope(CLSM). In addition, the effect of fiber distribution index(FDI), which was calculated based on the image in a z-direction of a sheet from CLSM, on the sheet properties of Indian mallow hanji was discussed. The proposed FDI had a good correlation with various properties of paper, such as apparent density, opacity, tear index, breaking length and zero-span tensile strength. Especially, sulfomethylated pulp sheets＇FDI was higher than alkali pulp sheets.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.232-238
• /
• 1999

The reinforcement of wheat straw pulp sheets with softwood kraft was studied, with special emphasis on the impact of softwood kraft beating and the proportion softwood kraft in straw pulp. the reinforcement was evaluated by measuring the tensile stiffness sand in-plane fracture behavior of samples. the results were compared with a mechanical pulp (TMP) and with a hardwood birch kraft, both reinforced with the same softwood kraft. Wheat straw pulp forms strong interfiber bonds. Therefore, its tensile stiffness and tensile strength are larger than TMP used. In-plane tear tests showed that a pure wheat straw pulp sheet has low fracture energy and correspondingly a narrow fracture process zone. The fracture energy of the reinforced straw sheets was found to increase linearly with the proportion of both unbeaten and beaten softwood pulps.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.73-79
• /
• 2008

The permanence is of great importance to library and archival paper. According to the established standardizations including ISO and ANSI, the permanence can be specified with tear strength, pH, alkali reserve and kappa number. In this study, we evaluated the permanence and durability of domestic coated and copy paper grades. Two types of coated paper grades and all kinds of copy papers which were tested in this study were satisfied with the criterion of permanence specification. However, all of the tested paper grades didn't meet the requirements of durability because of their low folding endurance.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.85-90
• /
• 2000

The fracture toughness and crack propagation behaviors of short nylon66 fiber reinforced Chloroprene rubber nave been Investigated as functions of fiber aspect ratio, fiber content and interphase conditions. The J for crack initiation and rupture were determined for short-fiber reinforced rubber. The values of $J_c$ for most reinforced rubbers were low compared that of matrix. But, $J_r$ at rupture showed a higher value than that of matrix. The crack propagation behaviors were analyzed into 3 patterns with increasing fiber aspect ratio and fiber content. The tearing mechanisms of matrix and fiber reinforced rubber were observed by CCD camera focused on the tip of crack and load-displacement graph. Both cases showed a completely different behaviors

• Journal of the Korean Applied Science and Technology
• /
• v.7 no.1
• /
• pp.87-91
• /
• 1990

1,3-Di(2-octadecanoyl)-2,7-dioxy-l,3,6,8-tetra aza cyclodecane [DDTC] was synthesized by reacting octadecanoic acid, 2,2'-di-aminodiethyl amine with urea. O/W type softner (STA) was prepared by blending DDTC and pentaerithritol monostearate with polyoxysthylene (20) oleyl ether, polyoxyethylene (10) castor oil, and PEG #1000-lauric acid ester. Treating STA to all cotton fabrics, the physical properties, such as tear strength, crease recovery, flexing abrasion resistance, and so on were measured. Resulting the measurements, STA was found to be durable softner with softness.

• Journal of the Korean Applied Science and Technology
• /
• v.7 no.1
• /
• pp.31-36
• /
• 1990

Synthesizing octylphosphate(OTP) from phosphorus pentoxide with n-octyl alcohol, octylphosphatethiourea(OTPU) was prepared from OTP with thiourea. After flame retardant finishing OTPU to acrylic fabrics, nylon taffeta and tetron taffeta, the physical properties, such as tear strength and flame retardancy were measured. As the results of the measurement, OTPU was found to be a good flame retardant having softness using to synthetic fibers.