• Journal of the Korean Wood Science and Technology
• /
• v.20 no.1
• /
• pp.51-59
• /
• 1992

The acetylation of papermaking pulp fiber(SwBKP, SwUKP, HwBKP and HwBCTMF) is carried out to modify the characteristics of pulp and paper. The effects of the addition of acetylated pulp on the filler retention and paper properties were investigated. The acetylation depended upon pulp type and the content of short fiber and fines. The addition of acetylated SwBKP did not deteriorate the retention of clay, talc and calcium carbonate, while the retention of titanium dioxide was increased with the addition of 20% and above. The brightness opacity, air permeability and tear strength were improved, but water resistance, burst strength and folding endurance were decreased by the addition of acetylated SwBKP and SwUKP. The tensile strength of SwBKP was increased until 20% of acetylated pulp is added, and then decreased. The tensile strength of SwUKP, however, was not changed until the acetylated pulp of 25% is added. The dimensional stability was improved by the addition of acetylated pulp and showed the different response to SwBKP and SwUKP.

• Journal of the Korean Applied Science and Technology
• /
• v.7 no.1
• /
• pp.87-91
• /
• 1990

1,3-Di(2-octadecanoyl)-2,7-dioxy-l,3,6,8-tetra aza cyclodecane [DDTC] was synthesized by reacting octadecanoic acid, 2,2'-di-aminodiethyl amine with urea. O/W type softner (STA) was prepared by blending DDTC and pentaerithritol monostearate with polyoxysthylene (20) oleyl ether, polyoxyethylene (10) castor oil, and PEG #1000-lauric acid ester. Treating STA to all cotton fabrics, the physical properties, such as tear strength, crease recovery, flexing abrasion resistance, and so on were measured. Resulting the measurements, STA was found to be durable softner with softness.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.75-83
• /
• 1995

1, 3-Di(2-dodecanoylaminoethyl)-2, 7-dioxy-1, 3, 6, 8-tetraazacyclodecane[DDTD] and sorbitan monostearate(SMS) were synthesized as a main component for softner. O/W type softner(DSA) was prepared by blending of DSA, SMS, polyoxyethylene(10) castor oil, glyceryl monooleate, and polyoxyethylene(7) stearyl ether. After treatment of DSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, DSA was found to be durable softner with good softness.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.65-73
• /
• 1995

1, 3-Di(dodecanoyl)-2, 7-dioxy-6, 8-di(2-hydroxyethyl)-1, 3, 6, 8-tetraazacyclodecane(DDDT) and pentaerythritol monostearate(PMS) were synthesized as a main component for softner. O/W type softner(DPSA) was prepared by blending DDDT and PMS with polyoxyethylene(10) castor oil, polyoxyethylene(20) oleyl ether, and polyoxyethylene(10) monolaurate. After treatment of DPSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, DPSA was proved to be durable softner with good softness.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.4
• /
• pp.341-345
• /
• 2003

Organic acid salt of fatty polyamide (DDDT) and acrylate of fatty carbamide (DDTCA) were synthesized as a main component for the softener. O/W type non-ionic softener (NSC) was prepared by blending DDDT and DDTCA with beef tallow, lanolin anhydride. polyoxyethylene(7) stearyl ether, and polyoxyethylene(50) oleyl ether. After treatment of NSC to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, NSC was proved to be durable non-ionic softener with good softness.

• Macromolecular Research
• /
• v.8 no.6
• /
• pp.285-291
• /
• 2000

Influence of silane coupling agent, bis-(3-(triethoxisilyl)-propyl)-tetrassulfide, on cure characteristics and bound rubber content of filled styrene-butadiene rubber (SBR) compounds and on physical properties of the vulcanizates was studied. Carbon black-filled and silica-filled compounds were compared. Content of the bound rubber increased with increased content of the silane coupling agent and this trend was shown more clearly in the silica-filled compounds. Optimum cure time of the carbon black-filled compound increased with increase of the silane content, while that of the silica-filled one decreased. Cure rate of the carbon black-filled compound became slower as the silane content increased while that of the silica-filled one became faster. By increasing the silane content, the minimum torque decreased and the delta torque increased. Physical properties of the silica-filled vulcanizate were found to be improved by adding the silane coupling agent. However, for the carbon black-filled vulcanizates, the tensile strength and tear resistance decreased with increase of the silane content. The differences between the carbon black-filled and silica-filled compounds were explained by difference in the reactivities of the fillers with the silane.

• Elastomers and Composites
• /
• v.7 no.1
• /
• pp.38-44
• /
• 1972

As a series of the studies of EPDM-polymer blonds, the experiments are concentrated to the investigation of the physical properties of the EPDM-BR blends. The results are shown as follows: 1. In blending, tensile strength and elongation decreased with increase in EPDM contents. 2. The resistance for aging and ozone were much improved after blending. It was effective more :han the ratio of EPDM/BR is 50/50. 3. Tear strength is less influenced after blending and rebound character decreased with increase in EPDM contents.

• Steel and Composite Structures
• /
• v.9 no.2
• /
• pp.173-189
• /
• 2009

This paper presents a study on the behavior and design of bolted stainless steel plates under in-plane tension. Using an experimentally validated finite element (FE) program strength of stainless steel bolted plates under tension is examined with an emphasis on plate bearing mode of failure. A numerical parametric study was carried out which includes examining the behavior of stainless steel plate models with various proportions, bolt locations and in two different material grades. The models were designed to fail particularly in bolt tear-out and material piling-up modes. In the numerical simulation of the models, non-linear stress-strain material behavior of stainless steel was considered by using expressions which represent the full range of strains up to the ultimate tensile strain. Using the results of the parametric study, the effect of variations in bolt positions, such as end and edge distance and bolt pitch distance on bearing resistance of stainless steel bolted plates under in-plane tension has been investigated. Finally, the results obtained are critically examined using design estimations of the currently available international design guidance.

• Journal of Korea Foundry Society
• /
• v.20 no.1
• /
• pp.3-12
• /
• 2000

The lead content of drinking water has been restricted to less than 15 ppb by Environmental Protection Agency (EPA) in USA. This has led to extensive research and development work at the Materials Technology Laboratory (MTL) of CANMET, a Canadian Government research laboratory, on the development of low-lead and lead-free copper alloys for plumbing applications. Attentionhas also been focused on the environmentally friendly and energy efficient permanent mold casting process to minimize the disposal of foundry sand contaminated by lead due to the use of leaded alloys in the non-ferrous foundries. A new series of alloys called SeBiLOY contaning Bi and Se been introduced to replace lead in the leaded alloys. This paper addresses some important casting characteristics such as fluidity, hot tear resistance, mechanical properties and microstructure of lead-free alloys such as SeBiLOY III and low-lead alloys such as silicon brass, silicon bronze and yellow brass in gravity permanent mold casting.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.1
• /
• pp.1-7
• /
• 1998

Lubricating softner(SOS-2) for permanent press(PP) finish was prepared by blending water, beef tallow hardened oil for improving softness, and the emulsion which was synthesized from N-hexadecanoyl-N,N'-bis(2-hexadecamidoethyl)amine as a softening component and silicone oil KF-96 as a lubricating component. The prepared SOS-2 and the PP finishing resin were applied to PP finishing cotton broad cloth and P/C gingham samples using one bath method. The properties such as tear strength, crease recovery, bending resistance test were tested. The samples treated with SOS-2 and PP finishing resin have improved properties, compared with nontreated samples, those treated only with PP finishing resin, those treated with commercial PP finishing softners and PP finishing resin.