• 펄프종이기술
• /
• 제46권6호
• /
• pp.26-33
• /
• 2014

Frankincense resin was applied to Hanji to improve its physical properties. The resin-treated paper showed the increasement of physical properties such as weight, thickness, and density. The highest increasement in weight and density of resin-treated paper were found at 30% treatment concentrations and the largest values of density were $41g/m^2$ Hanji. With the increasement of concentration, the brightness was decreased and transparency was improved. Of the mechanical properties of the paper, the tensile index and burst index showed the improved values. The tear index, however, was decreased. The frankincense resin showed the highest result in the tensile index of resin-treated paper and the basis weight of $41g/m^2$ Hanji. The air resistance of the resin-treated paper got improved with the increase of the concentration and $105g/m^2$ Hanji showed the highest values. The highest improvement in air resistance may make the resin-treated Hanji possible to use for semipermeable materials.

• 한국지반신소재학회논문집
• /
• 제4권1호
• /
• pp.37-46
• /
• 2005

폐기물 매립지 관련 특성을 조사하기 위하여 PVA 지오텍스타일/HDPE 지오멤브레인 복합재료를 제조하였다. PVA 지오텍스타일의 인장특성, 인열 및 파열강도, 유효구멍크기와 투수성 등을 각각 측정하였다. 또한 침출수에 대한 화학저항성과 자외선 안정성도 측정하였으며, 하중조건에 따른 크리프 변형거동과 마찰특성도 측정하였다. 이들 결과로부터 PVA 지오텍스타일/HDPE 지오멤브레인 복합재료는 일반적으로 폐기물 매립지에 적용되는 폴리프로필렌이나 폴리에스테르 지오텍스타일에 비해 우수한 특성을 나타내었다. 끝으로, 감소인자 분석으로부터 PVA 지오텍스타일/HDPE 지오멤브레인 복합재료의 크리프 변형거동도 폴리프로필렌이나 폴리에스테르 지오텍스타일에 비해 안정함을 알 수 있었다.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.29-34
• /
• 1995

Silicone softner(SSN-3) for permanent press(PP) finish was prepared by blending beef tallow hardened oil for Improving softness, water, the emulsion, which was synthesized from pentaerythritol monostearate as a softening component and silicone oil KF-96 as a lubricating component. The prepared SSN-3 and the PP finishing resin were applied to PP finishing cotton broad cloth and P/C gingham samples using one bath method. The properties such as crease recovery, tear strength, bending resistance test were tested. The samples treated with SSN-3 and PP finishing resin have improved properties, compared with nontreated samples, those treated only with PP finishing resin, those treated with commercial PP finishing softners and PP finishing resin. Also from the bending resistance test, the two kinds of fabric samples treated with SSN-3 of 3% showed grade 5 and these were good enough in feeling.

• 한국응용과학기술학회지
• /
• 제19권2호
• /
• pp.117-122
• /
• 2002

A silicone softner (SS-5), a permanent press (PP) finish, was prepared by blending silicone oil KF-96 (as a lubricating component) and beef tallow hardened oil (as a softening component) which was synthesized from fatty polyamide salts. The prepared SS-5 and the PP finishing resin were applied to PP finishing cotton cloth and P/C gingham sample by one-bath method. The properties such as crease recovery, tear strength, and bending resistance were tested. The samples treated with SS-5 and PP finishing resin showed improved properties when comparing with the untreated ones, with the ones treated only with PP finishing resin, with ones treated with commercial PP finishing softners and PP finishing resin. The grades of fabric samples treated with 3% SS-5 were fifth grade in the bending resistance test.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.269-279
• /
• 2021

In this study, the laminating of TPU film after coating of primer adhesive on the fabrics was applied in order to secure the strength to withstand a fall from a higher altitude by increasing the adhesion between the fabric and the film layer. It seems that the fineness of the yarn and the weave construction have a greater effect than the type of the laminating films. The order of superiority of the laminated fabrics by film type and thickness was the same for 1000 denier and 210 denier fabrics, and the tendency was consistent with the order of superiority in the film properties and peel strength tests. The tear strength of laminating fabrics increased three to four times for 1000 denier fabrics compared to the fabric alone, but it decreased by 2 times for the 210 denier fabrics. Summarizing the above results, it is most appropriate to combine 1000d fabric with three types of laminating films(100~200㎛ thickness) of A(0.2T) or B(0.15T) or D(0.1T) considering the air pressure resistance, the impact resistance during the fall, and the durability against damage during use.

• 한국염색가공학회지
• /
• 제35권3호
• /
• pp.151-158
• /
• 2023

In this study, we investigated the durability properties of the recycled leather using shaving scrap with antioxidant. Recycled leather sheets were manufactured by mixing shaving scrap and NB latex as a binder. HALS(Hindered Amine Light Stabilizer) and UVA(UV absorbers) were used as antioxidant. Mechanical properties such as hardness, tensile strength, elongation, tear strength and abrasion resistance were measured. Light aging resistance was evaluated using UV lamp and the degree of discoloration of the recycled leather sheets using a gray scale. In addition, to evaluate heat aging and UV aging, the degree of discoloration of the recycled leather sheets over time was measured using colorimeter. Washing fastness was evaluated on the degree of dyeing of recycled leather sheets for six type of multi-fiber woven fabrics (Acetate, Cotton, Nylon-66, Polyester, Acryl, Wool). To determine whether hazardous substances were detected in recycled leather sheets, the contents of arylamine and Cr 6⁺ were evaluated. As a result, when used in combination with antioxidant, the heat aging and light aging of recycled leather were improved and hazardous substance were not detected.

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.401-407
• /
• 2009

용액중합 스티렌-부타디엔 고무 컴파운드 가교체의 균열저항성 및 마모특성에 미치는 공정오일의 영향을 조사하기 위해 방향족 고리화합물(PCA) 성분을 다량 함유하고 있는 방향족 오일과 저 PCA 오일을 선택하였다. 인장강도 및 인열강도 결과에 의하면 방향족 오일함유 컴파운드가 저 PCA 오일함유 컴파운드에 비해 우수한 물성을 나타내었다. 또한 방향족 오일함유 컴파운드가 균열저항성이 월등히 우수하였고, 특히 인열에너지가 낮은 범위에서 더 우수한 결과를 나타내었다. 마모저항특성은 마찰에너지가 낮은 범위에서는 방향족 오일함유 컴파운드가 우수한 결과를 나타낸 반면, 높은 마찰에너지 범위에서는 저 PCA 오일 함유 컴파운드가 오히려 높은 저항성을 나타내었다.

• Clinics in Shoulder and Elbow
• /
• 제11권2호
• /
• pp.77-81
• /
• 2008

회전근 개 파열에 대한 봉합 수술의 목적은 봉합 초기에 고정력을 높이고 건-골 사이의 간격 형성을 최소화 하며 반복적인 부하에 기계적인 안정성을 유지시키고 회전근 개의 끝이 뼈에 부착되어 치유될 때까지 건-골 사이의 치유 환경을 최적화시키는 것이다. 일열 봉합은 원래의 회전근 개 부착부에 건을 완전히 부착시키는 면적이 제일 적고 간격 형성에 취약하다. 이열 봉합은 고정 실패를 방지하는 힘이 일열 봉합보다는 우수하고 간격 형성도 더 적으며 교량형 봉합은 최대 인장력이 가장 크며 전단력 및 회전력에 강하고 간격 형성도 제일 적다. 이러한 것을 볼 때 이열 봉합 및 교량형 봉합이 일열 봉합보다 우수한 점이 많지만 수술 시간이 좀 더 오래 걸리고 삽입하는 나사못의 개수도 많아 수술료가 비싸다는 단점도 가지고 있다. 따라서 일열 봉합도 회전근 개의 점액 낭측 부분층 파열이나 작은 완전 파열에 쓰여질 수 있는 아직은 유용한 방법으로 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.1-4
• /
• 2005

This study is to examine adhesion the characteristics of self adhesive asphalt to minimize of the construction periods and the environmental problems through the performance estimation of materials to reduce waterproof problem and the long durability maintenance of building structures. This study tested the estimation items of self rubberized adhesive asphalt to examine the sheet discovered the most important problem in the construction site and the connection stability in the sheet joint. Besides, this study examined the material characteristics such as tension property, tear property, temperature dependence, heat resistance, adhesion stability and so on. Test results of the separative items satisfied in the reference figure of connection stability and adhesion stability which could confirm adhesion performances and other items also satisfied in the reference.

• 펄프종이기술
• /
• 제42권3호
• /
• pp.37-42
• /
• 2010

The properties of paper are very susceptible to moisture content originated from relative humidity. This propensity of PVA impregnated paper was investigated in this study. Especially the hardening effect of borax treatment after PVA impregnation on the response of paper sample to the relative humidity was evaluated. When the moisture content was increased with the relative humidity, tensile stretch and tear resistance were increased while tensile strength and stiffness were decreased. A great increase in folding endurance of PVA impregnated paper sample was found at the higher relative humidity. The borax treatment could reduce the response of PVA impregated paper to the relative humidity.