• Safety and Health at Work
• /
• v.7 no.4
• /
• pp.326-330
• /
• 2016

Background: The Nordic Safety Climate Questionnaire-50 (NOSACQ-50) was developed by a team of Nordic occupational safety researchers based on safety climate and psychological theories. The aim of this study was to develop and validate the Persian version of NOSACQ-50 and assess the score of safety climate on a group of workers in a steel company in Iran. Methods: The Persian version of NOSACQ-50 was distributed among 661 employees of a steel company in Qazvin Province (Iran). Exploratory factor analysis (EFA) and confirmatory factor analysis were used to determine the dimensions of the questionnaire. The reliability of the questionnaire was assessed using Cronbach ${\alpha}$ coefficient. Pearson correlation test was applied to investigate the correlation between different dimensions. Results: The results of EFA showed that the Persian version of NOSACQ-50 consisted of six dimensions. The Cronbach ${\alpha}$ coefficient of the questionnaire was 0.94. The mean score of safety climate in all dimensions was 2.89 (standard deviation 0.60). Conclusion: The Persian version of NOSACQ-50 had a satisfactory validity for measuring safety climate in the studied Iranian population.

• Health Policy and Management
• /
• v.14 no.1
• /
• pp.1-23
• /
• 2004

This study was carried out to investigate the activities and job satisfaction of public health doctors in charge of community health programmes. Subjects were 138 public health doctors charged with community health project, registered in the roll of public health doctors, made out by Central Supporting Team for the District Health Work in 2002. Data was obtained from Ninety-six public health doctors. The response rate was 70%. The survey was conducted from March to April in 2003 bye-mail. The items of the questionnaire consisted of general characteristics of participants, understanding of their activities, support system, job satisfaction, and suggestions to improve the system. Collected data was analyzed using PC-SPSS 10.1. Descriptive analysis, t-test, and ANOVA test were used. The results are as follows: Most of the respondents showed a low participation rate in community health services, but they agreed to the importance of their activities and the necessity to modify and improve the system. 70% of the respondents were dissatisfied with their jobs. The participation in health planning and programmes of health center, and the degree of acceptance of their opinion from health center workers were significantly related to their job satisfaction. The participation rate of the public health doctors having specialty, in community health services is higher than that of the others. In terms of the supports for system operation, the reflection of one's intention in job arrangement process, education and public relation of this system, and the administrative and financial supports made significant differences in the job satisfaction and the accomplishment of their duty. The respondents hoped that the administrative and financial supports for public health doctors in charge of community health programmes should be reinforced to motivate them. They also wanted that they could keep from being overloaded with clinical services. They favored to conduct home visit, community diagnosis, health planning, and health promotion programs as their appropriate activities. From these results, we suggest some strategies to motivate and empower the public health doctors in charge of community health programmes.

• Journal of the Korea Concrete Institute
• /
• v.23 no.4
• /
• pp.405-411
• /
• 2011

Using combinations of carbon and glass fiber composites normally used for strengthening of concrete structures, the hybrid effect from strengthening concrete structures using the composite is studied. To produce the hybrid effects, the specimens were made with optimum proportions of carbon fibers with glass fibers. Then, direct tensile tests were conducted on the hybrid FRP (fiber reinforced polymer) specimens. Unlike the woven fiber sheet currently used in construction sites, the FRP specimens have to be directly combined with the fibers, which make the work very complicated. Therefore, direct tensile test specimens manufacturing method based on the combination of high-tension carbon fibers and E-type glass fibers was proposed and the effects of hybridization is studied through the direct tensile test. By comparing the ductility index, the modulus of elasticity, and the stress-strain curves of the specimens, the most optimum glass to carbon fiber combination ratio for the hybrid FRP was found to be 9 to 1 with ductile K-type epoxy. The study results are discussed in detail in the paper.

• Journal of Korean Academy of Nursing
• /
• v.46 no.5
• /
• pp.753-765
• /
• 2016

Purpose: The aim of this study was to explore the lived experiences of women problem gamblers, focusing on the meaning of gambling to them, how and why these women continue to gamble or stop gambling, and their needs and concerns. In order to effectively help women problem gamblers, practical in-depth knowledge is necessary to develop intervention programs for prevention, treatment, and recovery among women problem gamblers. Methods: The hermeneutic phenomenology approach was used to guide in-depth interviews and team interpretation of data. Sixteen women gamblers who chose to live in the casino area were recruited through snowball sampling with help from a counseling center. Participants were individually interviewed from February to April 2013 and asked to tell their stories of gambling. Transcribed interviews provided data for interpretive analysis. Results: In the study analysis one constitutive pattern was identified: moving beyond addiction by recognizing the two faces of gambling in their life. Four related themes emerged in the analysis-gambling as alluring; gambling as 'ugly'; living in contradictions; and moving beyond. Conclusion: Loneliness and isolation play a critical role in gambling experiences of women gamblers in Korea. In other words, they are motivated to gamble in order to escape from loneliness, to stop gambling for fear of being lonely as they get older, and to stay in the casnio area so as not to be alone. The need for acceptance is one fo the important factors that should be considered in developing intervention program for women.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.2
• /
• pp.90-98
• /
• 2016

High-rise buildings construction project have various risk factors. Major risk factors are negative results such as time delay and increase of costs. Therefore, this study was analyzed risk factors in construction stages of high-rise buildings using by PROMETHEE technique. For this, this research were identified risk factors through experts Focus Group Interview(FGI). And, PROMETHEE was used to setup evaluation standard for analysis of high-rise building construction risks. Next, the standard of evaluation index calculation was composed by using the definition level in PDRI. Preference function and evaluation index were identified through questionnaires. Through these processes, this study has calculated the importance of high-rise building construction risks using by PROMETHEE technique. As a result, high degree risk factors were as following. These are 'Operation plan of material lifting', 'Outrigger & Belt Truss Construction', 'Foundation work plan of high-rise building' and 'Considering a Structure concept of high-rise building'.

• Journal of computational fluids engineering
• /
• v.21 no.2
• /
• pp.54-61
• /
• 2016

When spent fuel assemblies from the reactor of nuclear power plants(NPPs) are transported, the assemblies are exposed to short-term operations that can affect the peak cladding temperature of spent fuel assemblies. Therefore, it needs to perform the analysis of heat transfer on spent fuel dry cask during the operation. For 3 dimensional computational fluid dynamnics(CFD) simulation, it is proposed that the short-term operation is divided into three processes: Wet, dry, and vacuum drying condition. The three processes have different heat transfer mode and medium. Metal transportation cask, which is Korea Radioactive Waste Agency(KORAD)'s developing cask, is evaluated by the methods proposed in this work. During working hours, the boiling at wet process does not occur in the cask and the peak cladding temperatures of all processes remain below $400^{\circ}C$. The maximum peak cladding temperature is $173.8^{\circ}C$ at vacuum drying process and the temperature rise of dry, and vacuum drying process occurs steeply.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.293-299
• /
• 2012

The thermodynamic efficiency characteristics of R245fa and water as working fluids have been analyzed for the electricity generation system applying the Rankine cycle to recover the waste heat of the exhaust gas from a diesel engine for the propulsion of a large ship. The theoretical calculation results showed that the cycle, system, and total efficiencies were improved as the turbine inlet pressure was increased for R245fa at a fixed mass flow rate. In addition, the net work rate generated by the Rankine cycle was elevated with increasing turbine inlet pressure. In the case of water, however, the maximum system efficiencies were demonstrated at relatively small ratios of mass flow rate and turbine inlet pressure, respectively, compared to those of R245fa. The optimized values of the net power of the cycle, system efficiency, and total efficiency for water had relatively large values compared to those of R245fa.

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2147-2158
• /
• 2006

The continuous wavelet transform (CWT) has a frequency-adaptive time-frequency tiling property, which makes it popular for the analysis of dispersive elastic wave signals. However, because the time-frequency tiling of CWT is not signal-dependent, it still has some limitations in the analysis of elastic waves with spectral components that are dispersed rapidly in time. The objective of this paper is to introduce an advanced time-frequency analysis method, called the dispersion-based continuous wavelet transform (D-CWT) whose time-frequency tiling is adaptively varied according to the dispersion relation of the waves to be analyzed. In the D-CWT method, time-frequency tiling can have frequency-adaptive characteristics like CWT and adaptively rotate in the time-frequency plane depending on the local wave dispersion. Therefore, D-CWT provides higher time-frequency localization than the conventional CWT. In this work, D-CWT method is applied to the analysis of dispersive elastic waves measured in waveguide experiments and an efficient procedure to extract information on the dispersion relation hidden in a wave signal is presented. In addition, the ridge property of the present transform is investigated theoretically to show its effectiveness in analyzing highly time-varying signals. Numerical simulations and experimental results are presented to show the effectiveness of the present method.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.19-26
• /
• 2003

In the face of the deterioration of tobacco manufacturing plant, we've got the plan for now manufacturing factory for the competitiveness, modernization, rationalization and environment. To achieve the goals, it was necessary to plan and investigate in the early stage of project. Consequently. We determined to introduce the CM in the early stage. We Performed the whole phase of CM services front the pre design phase services like feasibility analysis of site and building, plant master plan, selection of manufacturing facilities and drawing up the RFP, to maintenance management phase after the completion of a construction work. Contrary to the another CM projects, YongJu New Tobacco Manufacturing Plant CM organized the CM team with expert in field before the design development. This study analyze and evaluate the CM services of YongJu project which performed on the pre design phase. The purpose of this study is to emphasize the importance of pre design phase CM and support that CM services will start from the pre design phase.

• Journal of Korean Public Health Nursing
• /
• v.28 no.1
• /
• pp.114-126
• /
• 2014

Purpose: The purpose of this study was to determine the accuracy and satisfaction with IVIC300 (Intravenous infusion controller). Method: The subjects consisted of 90 nurses and 100 patients. Data collected during July 2013 were analyzed using descriptive statistics, t-test, ANOVA, and $X^2$-test (Chi-Square). Result: The error value of IVIC300 was less than that of Dosi-flow. Differences of error values according to variable of fluid infusion (needle's gauge, patient's moving, patient's calls, and nurse's arabitary calls) were not significant. The mean scores for satisfaction with IVIC300 of nurses ($3.67{\pm}.76$), patients ($3.75{\pm}.63$) were above average. Satisfaction with IVIC300 of nurses differed significantly according to age, work unit, and clinical career. Satisfaction with IVIC300 of patients was not significantly different according to general characteristics. Conclusion: These findings indicate that it is proven the accuracy of IVIC300, and is considered individual characteristics in use IVIC300.