• Applied Chemistry for Engineering
• /
• v.34 no.4
• /
• pp.357-364
• /
• 2023

Selective catalytic reduction (SCR) is the most effective method for reducing nitrogen oxide emissions, but the operating temperature range of V₂O₅-WO₃/TiO₂ catalysts is narrow (300~400℃). In this study, a new catalyst with an operating temperature range of 200~450℃ was developed. The catalyst poison, ammonium bisulfate, generated during the SCR process can be removed by heating above 350℃. To increase the number of active sites and promote the dispersion of active materials, titanium isopropoxide (TTIP) treatment was performed on the TiO₂ support with various TTIP/TiO₂ mass ratios. Among them, the 5 wt% TTIP loaded catalyst showed improved performance due to higher thermal stability caused by high W dispersion and the formation of V⁵⁺. In addition, the 5 wt% TTIP-loaded catalyst prepared by a one-step co-precipitation method showed greater V-OH and W-OH dispersion and enhanced interactions in contrast to conventional methods, resulting in higher catalytic activity at lower temperatures. This review article aims to provide an accessible explanation for researchers investigating how to improve the surface properties of TiO2 catalysts using TTIP.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.7
• /
• pp.61-73
• /
• 2008

Piles of a bridge pier are connected with the column through the pile cap (footing). Behavior of the pile foundation can be different according to the connection method between piles and the pile cap. Connection methods between pile heads and the pile cap are divided into two groups : rigid connections and hinge connections. Domestic design code has been specified to use rigid connection method for the highway bridge. In the rigid connection method, maximum bending moment of a pile occurs at the pile head and this helps the pile to prevent the excessive displacement. Rigid methods are also good to improve the seismic performance. However, some specifications prescribe that conservative results through investigations of both the fixed-head condition and the free-head condition should be reflected in the design. This statement may induce an over-estimated design for the bridge which has high-quality structures with casing covered drilled shafts and the PC-house contained pile cap. Because the assumption of free-head conditions (hinge connections) is unreal for the elevated pile cap system with multiple piles of the long span sea-crossing bridges. On the other hand, elastic displacement method to evaluate the pile reactions under the pile cap is not suitable for this type of bridges due to impractical assumptions. So, full modeling techniques which analyze the superstructure and the substructure simultaneously should be performed. Loads and stress state of the large diameter drilled shaft and the pile cap for Incheon Bridge which will be the longest bridge of Korea were investigated through the full modeling for rigid connection conditions.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.4
• /
• pp.183-196
• /
• 2018

Studies that approach from the point of view that human thoughts or minds are dominated by behavior as well as that human behavior is dominated by thoughts or minds, have begun to attract attention from the late 2000s. The physical experience is reminiscent of a metaphorically connected abstract concept, which ultimately affects the judgment or evaluation of a particular object. However, studies that have been carried out so far have been limited to studies on the difference in perception and judgment depending on the objects to be viewed, the objects to be touched, and the objects to which they are carried. In this study, we tried to find out that the physical movement of the body in the upward or downward direction affects the psychological judgment differently. In the first experiment, a pair of words that were considered to be connected metaphorically was tested. In the second experiment, the subjects tried to solve the complicated calculation problem in a short time, and then they watched the video related to the upward movement or downward movement, and then proceeded to measure the psychological judgment. As a result, it was found that 'downward movement' of the body has a metaphorical connection with 'closure', while 'upward movement' is related to 'progress'. In the case of downward-experienced group compared to upward-experienced group, the reverse intentions of their own decision were low, and the confidences in their own decision and the expectations for performance were high.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.7
• /
• pp.31-37
• /
• 2023

Since tunnels are built underground, it is impossible to check visually the location and degree of deterioration of steel ribs. Therefore, in tunnel maintenance, GPR images are generally used to detect steel ribs. While research on GPR image analysis employing artificial neural networks has primarily focused on detecting underground pipes and road damage, there have been limited applications for analyzing tunnel GPR data, specifically for steel rib detection, both internationally and domestically. In this study, a one-step object detection algorithm called YOLO, based on a convolutional neural network, was utilized to automate the localization of steel ribs using GPR data. The performance of the algorithm is then analyzed. Two datasets were employed for the analysis. A dataset comprising 512 original images and another dataset consisting of 2,048 augmented images. The omission rate, which represents the ratio of undetected steel ribs to the total number of steel ribs, was 0.38% for the model using the augmented data, whereas the omission rate for the model using only the original data was 7.18%. Thus, from an automation standpoint, it is more practical to employ an augmented dataset.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.2
• /
• pp.246-260
• /
• 2022

This study was conducted to analyze the creativity education contents of dance activities in physical education textbooks for the 3rd and 4th grades of elementary school. For this purpose, 16 types of textbooks and auxiliary data for physical education in the 3rd and 4th grades of elementary school were collected and analyzed using the creative education content analysis frame of the physical education textbook based on the 4P model. In order to secure the integrity of the research, expert consultation was operated. The results of this study are as follows. First, from the viewpoint of creative person, 'inquiry' was the most common in creative mind, and the rest of the elements appeared relatively evenly. As for the subject of activity, 'individual' and 'colleague (team)' showed similar frequencies. Second, from the viewpoint of the creative process, all activity areas appeared as 'learning', and most of the elements of the activity purpose appeared evenly, and the creative process was explored. Third, from the viewpoint of creative output, physical activity performance was the most common activity method, and two or three activity methods were used together. In the creativity factor, all factors appeared evenly, and sensitivity and sophistication were the most common with 4 factors. Fourth, from the viewpoint of the creative environment, most of the activity spaces were no restrictions, and the activity media consisted of many educational contents using the body. Through this study, it was requested that creativity education in dance activities should be expanded quantitatively and intensified in quality, and the necessity of spreading creativity education contents of dance activities to other areas was explored.

• Journal of The Korean Astronomical Society
• /
• v.56 no.2
• /
• pp.213-224
• /
• 2023

Type II solar radio bursts show frequency drifts from high to low over time. They have been known as a signature of coronal shock associated with Coronal Mass Ejections (CMEs) and/or flares, which cause an abrupt change in the space environment near the Earth (space weather). Therefore, early detection of type II bursts is important for forecasting of space weather. In this study, we develop a deep-learning (DL) model for the automatic detection of type II bursts. For this purpose, we adopted a 1-D Convolution Neutral Network (CNN) as it is well-suited for processing spatiotemporal information within the applied data set. We utilized a total of 286 radio burst spectrum images obtained by Hiraiso Radio Spectrograph (HiRAS) from 1991 and 2012, along with 231 spectrum images without the bursts from 2009 to 2015, to recognizes type II bursts. The burst types were labeled manually according to their spectra features in an answer table. Subsequently, we applied the 1-D CNN technique to the spectrum images using two filter windows with different size along time axis. To develop the DL model, we randomly selected 412 spectrum images (80%) for training and validation. The train history shows that both train and validation losses drop rapidly, while train and validation accuracies increased within approximately 100 epoches. For evaluation of the model's performance, we used 105 test images (20%) and employed a contingence table. It is found that false alarm ratio (FAR) and critical success index (CSI) were 0.14 and 0.83, respectively. Furthermore, we confirmed above result by adopting five-fold cross-validation method, in which we re-sampled five groups randomly. The estimated mean FAR and CSI of the five groups were 0.05 and 0.87, respectively. For experimental purposes, we applied our proposed model to 85 HiRAS type II radio bursts listed in the NGDC catalogue from 2009 to 2016 and 184 quiet (no bursts) spectrum images before and after the type II bursts. As a result, our model successfully detected 79 events (93%) of type II events. This results demonstrates, for the first time, that the 1-D CNN algorithm is useful for detecting type II bursts.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.130-144
• /
• 2023

Recently, various positioning technologies are being researched based on signal-based positioning and image-based positioning to obtain accurate indoor location information. Among these, various studies are being conducted on image positioning technology that determines the location of a mobile terminal using images acquired through cameras and sensor data collected as needed. For video-based positioning, a method of determining indoor location is used by matching mobile terminal photos with virtual landmark images, and for this purpose, it is necessary to build indoor spatial information about various landmarks such as billboards, vending machines, and ATM machines. In order to construct indoor spatial information on various landmarks, a panoramic image in the form of a road view and accurate 3D survey results were obtained through c 13 buildings of the Electronics and Telecommunications Research Institute(ETRI). When comparing the 3D total station final result and the terrestrial lidar panoramic image coordinates, the coordinates and distance performance were obtained within about 0.10m, confirming that accurate landmark construction for use in indoor positioning was possible. By utilizing these terrestrial lidar achievements to perform 3D landmark modeling necessary for image positioning, it was possible to more quickly model landmark information that could not be constructed only through 3D modeling using existing as-built drawings.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.4
• /
• pp.314-323
• /
• 2023

This study assessed the desired wage guidelines for medical technologists (MTs), mainly primary care providers and those in secondary medical institutions, in 16 cities and provinces in Korea. A survey of 1,327 MTs was conducted using a structured Google questionnaire from August 1, 2022, to September 30, 2022. The wage levels differed according to gender, age, education, career, region, and employment status. There were differences in wage levels according to gender and region with less than one year of career, and the wage gap was relatively larger for woman than man. An awareness of wage compensation appropriate for work performance, and technology value compensation were low at 2.01, 2.23, and 2.30, respectively. This study suggests that primary and secondary medical institutions should provide reasonable wages compensation for MTs' work in order to create an environment where MTs can receive stable jobs and work. Moreover, the Korean Association of Medical Technologists should establish a cooperative system so that the starting wage of MTs in primary and secondary medical institutions can receive the desired wage of 34 million won.

• Korean Journal of Radiology
• /
• v.23 no.8
• /
• pp.811-820
• /
• 2022

Objective: To develop a model incorporating radiomic features and clinical factors to accurately predict acute ischemic stroke (AIS) outcomes. Materials and Methods: Data from 522 AIS patients (382 male [73.2%]; mean age ± standard deviation, 58.9 ± 11.5 years) were randomly divided into the training (n = 311) and validation cohorts (n = 211). According to the modified Rankin Scale (mRS) at 6 months after hospital discharge, prognosis was dichotomized into good (mRS ≤ 2) and poor (mRS > 2); 1310 radiomics features were extracted from diffusion-weighted imaging and apparent diffusion coefficient maps. The minimum redundancy maximum relevance algorithm and the least absolute shrinkage and selection operator logistic regression method were implemented to select the features and establish a radiomics model. Univariable and multivariable logistic regression analyses were performed to identify the clinical factors and construct a clinical model. Ultimately, a multivariable logistic regression analysis incorporating independent clinical factors and radiomics score was implemented to establish the final combined prediction model using a backward step-down selection procedure, and a clinical-radiomics nomogram was developed. The models were evaluated using calibration, receiver operating characteristic (ROC), and decision curve analyses. Results: Age, sex, stroke history, diabetes, baseline mRS, baseline National Institutes of Health Stroke Scale score, and radiomics score were independent predictors of AIS outcomes. The area under the ROC curve of the clinical-radiomics model was 0.868 (95% confidence interval, 0.825-0.910) in the training cohort and 0.890 (0.844-0.936) in the validation cohort, which was significantly larger than that of the clinical or radiomics models. The clinical radiomics nomogram was well calibrated (p > 0.05). The decision curve analysis indicated its clinical usefulness. Conclusion: The clinical-radiomics model outperformed individual clinical or radiomics models and achieved satisfactory performance in predicting AIS outcomes.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.5
• /
• pp.69-81
• /
• 2014

There is a growing interest in the technology transfer and commercialization both at home and abroad. Accordingly, this study looked at the concept of technology transfer and commercialization, identified the factors that should be taken into account in order to facilitate technology transfer and commercialization, and then performed a empirical analysis. As for the conventional technology transfer and commercialization, there was a tendency to limit its scope to the exploration, transfer and commercialization of technology itself. Here in this research, technology transfer and commercialization is defined the category to expand as various activities implemented in order to make sure that intellectual properties such as intangible technological developments, know-how, and knowledge are transferred between the relevant parties through a contract or negotiation, and the party to which the transfer is made can then further develop and exploit the technology into tangible products and other activities to obtain economic benefit out of that. In addition, the findings of the positive analysis of technology transfer and commercialization revealed that the focus of facilitating technology transfer has been on the technology itself, its management and securing efficiency of the systems and institutions involved in the technology transfer and commercialization. So there was lack of recognition as to the importance of financial support given to the phase of technology commercialization. This indicates that when it comes to the technology transfer and commercialization, quantitative performance has been the focus of interest such as patent application, registration, number of technology transfers, royalty, etc. So there was not enough understanding as to the issues of starting up a business, creating quality jobs through technology transfer and commercialization, which are directly related to the realization of the creative economy. In this regard, this research is expected to be used for the development for the future policies to boost technology transfer and commercialization as it suggests not only simply ensuring quantitative performance but also necessary to create the environment for the creation of the stable ecosystem for the parties involved in the technology transfer and commercialization and then to build circumstances in which creative economy can be realized.