• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.1-11
• /
• 2014

Stabilization of iron artifacts is focused on desalination than corrosion inhibitors. However artifacts are not condition of desalination treatment must be applied to corrosion inhibitors. But iron artifacts is not representative of inhibitors which drug is most effective qualities have not been identified. Therefore in this study validates the effectiveness of existing inhibitors and its purpose is to suggest corrosion inhibitors for iron artifacts. In this study, Comparative experiment of corrosion inhibitors is selected BTA, DAN and MEA, TEA. This study was studied using Corrosion resistance test, Contact angle, XPS. As a result, all the samples treated with corrosion inhibitors was formed hydrophobic coating and was rising corrosion resistance. Also, the concentration of corrosion inhibitors was 3% better than 0.3%. BTA in the XPS experiment, the corrosive material to block the CH bond of the peak concentration was highly. This is considered corrosion potential is very high to see out the effect in the polarization experiment. Ethanolamine was superior to the MEA rather than in the TEA. MEA is likely to be appropriate in an outdoor iron artifacts seem to be suitable as corrosion inhibitors.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.5
• /
• pp.744-750
• /
• 2006

An experiment was carried out to evaluate the effects of substituted conjugated linoleic acid (CLA) for fat on qualities, lipid oxidation and residual nitrite contents in emulsion-type sausage (ETS) after different periods of storage. The control sausage contained 20% fat, however, the substituted CLA for fat sausages contained 17.5% fat+2.5% CLA, 15% fat+5% CLA, 12.5% fat+7.5% CLA and 10% fat+10% CLA, respectively. CLA concentration was significantly increased (p<0.05) by substitution of CLA sources for fat, and storage did not affect the CLA concentration. TBARS were significantly increased with the increasing of storage time in all treatments (p<0.05). Significantly higher $L^*$ values were observed in the 10% CLA treatment compared to other treatments during storage. Moreover, $a^*$ values in CLA treatments significantly (p<0.05) increased compared to the control. Again, $b^*$ values were significantly (p<0.05) higher in CLA treatments than those of the control during storage. The concentration of residual nitrite in ETS was significantly (p<0.05) different between the treatments during storage and the results were in the following order: control >2.5% CLA>5% CLA and 7.5% CLA>10% CLA. Overall acceptability of CLA treatments was significantly (p<0.05) lower than the control during storage, whereas no significant differences were found in overall acceptability between the treatments after 28 days of storage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.10
• /
• pp.1294-1300
• /
• 2008

Nelumbo nucifera G. tea white breads were prepared by the addition of 0.01, 0.02, 0.03, and 0.04% hemicellulase to flour of the basic formulation. The experiments and control were then compared in terms of quality characteristics, including pH, total titratable acidity, fermentation power of dough expansion, specific volume, baking loss, moisture content, color, textural characteristics, external and internal surface appearances, and sensory qualities in order to determine the optimal ratio of hemicellulase in the formulation. There were no significant differences in pH and total titratable acidity of dough among the experiments. Fermentation power of dough expansion were increased as incubation time increased. Baking loss was the highest at the 0.04% addition level, while the lowest at the 0.01% level. As hemicellulase content increased, pH, hardness, and fracturability of bread decreased, while total titratable acidity, specific volume, and resilience increased. Water content and lightness were the highest in the control bread samples, and yellowness was maximal in the 0.01% group. Bread made by the addition of hemicellulase had significantly higher greenness and flavor than the control group. Color, consistency, and springiness of crumb, density and uniformity of crumb pore, softness, chewiness, overall acceptability, lotus leaf flavor, delicious taste, astringency, bitterness, and off-flavor were not significantly different among the samples. The results indicate that adding 0.02$\sim$ 0.03% hemicellulase in N elumbo nucifera G. tea white bread is optimal for quality and provides a product with reasonably high overall acceptability.

• Korean Journal of Food Science and Technology
• /
• v.44 no.1
• /
• pp.34-40
• /
• 2012

This study was carried out to investigate the optimal roasting conditions for developing perilla leaf leached tea, which has high functional Perilla frutescens leaves. The roasting processes were carried out with variations in roasting temperature ($120-200^{\circ}C$) and roasting time (15-35 min), the response surface methodology was applied to monitor the changes in qualities of the roasted Perilla frutescens leaves. The antioxidant, bioactive substance in roasted Perilla frutescens leaves, and their extracts were the quality parameters. The total polyphenol and total flavonoid contents increased with time and temperature up to 25 min and $160^{\circ}C$. Antioxidative activities showed a positive correlation with the amount of phenolic compound. Caffeic acid and rosmarinic acid contents increased with time up to a mild temperature, $160^{\circ}C$, while they decreased at high temperatures over $160^{\circ}C$. The optimum roasting conditions selected for developing perilla leaf leached tea were thus $180^{\circ}C$ and 20 min, given the conditions in the above experiments.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.363-370
• /
• 2018

The succulent plants of Echeveria genus are in increasing demand worldwide, but it is difficult to supply good quality young plants throughout the year because propagation efficiencies are depend on cultivar and environmental factors. This study was carried out to investigate the propagation efficiencies of leaf cutting in Echeveria cultivars at different LED light qualities in a closed-type plant factory system. Leaf cuttings cut from stock plants of six difficult-to-propagated cultivars 'Afterglow (AG)', 'Berkeley Light (BL)', 'Mason (MS)', 'Subsessilis Light (SL)', 'Cream Tea (CT)', and 'Ben Badis (BB)' were put into cutting media in the plant factory system maintained at a temperature of $24{\pm}2^{\circ}C$ and relative humidity of $60{\pm}10%$, and watered with over-head irrigation twice a week. Cuttings were irradiated with sole or mixed red (R, 660 nm), blue (B, 450 nm), green (G, 530 nm), and far-red (FR, 730 nm) LEDs as follows: R10, R8+B2, R5+B5, R7+B2+FR1, and R7+B2+G1. PPFD just above the cuttings was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and photoperiod was 16/8 (light/dark) hours. As a result, propagation efficiencies were dependent on cultivar. Rooting and shooting were relatively easy in 'SL' but shoot formation in 'AG' was very difficult. Light qualities from LEDs also affected plant regeneration. Light conditions with a higher ratio of B, R5+B5, R7+B2+FR1, and R7+B2+G1, promoted shoot formation and growth but inhibited rooting and root growth. R10 and R8+B2 with a higher ratio of R promoted rooting and root growth and inhibited shoot formation and growth of cuttings. In addition, the treatment with FR increased leaf size and biomass of the all plants. Therefore, further studies are needed to investigate the optimum compositions of LED light quality for the improvement of leaf cutting efficiency in difficultto-propagated Echeveria cultivars.

• Journal of Dairy Science and Biotechnology
• /
• v.27 no.2
• /
• pp.7-16
• /
• 2009

Appenzeller cheese samples were prepared by addition of 0.5, 1.0, and 2.0% green tea (Camellia sinensis, CS) powder and control cheese. We examined various quality characteristics of the novel cheese, such as viable-cell counts, pH, water-soluble nitrogen (WSN), non-casein nitrogen (NCN), non-protein nitrogen (NPN), and catechin level during maturation for 16 weeks at $14^{\circ}C$. To develop a Korean natural cheese containing green tea powder, we also analyzed the changes in the polyacrylamide gel electrophoresis pattern, chemical composition, and sensory qualities. The viable cell counts of the samples were not significantly different. Until the $3^{rd}$ week, the pH of the CS cheese decreased with an increase in the maturation time. However, the pH gradually increased by the $12^{th}$ week, while WSN, NCN, NPN also increased. The WSN, NCN, NPN, and catechin values for the CS cheese samples were significantly higher than the values for the control cheese. The polyacrylamide gel electrophoretic pattern of caseins for the CS cheese indicated that this cheese degraded more rapidly than the control cheese did. In the sensory evaluation, cheese with 1.0% CS powder showed the highest scores in taste and appearance and good scores in flavor and texture. These results indicate that 1.0% CS is the optimal value for addition to cheese, and cheese containing 1.0% CS shows good physiological properties and reasonably high overall sensory acceptability.

• Food Science of Animal Resources
• /
• v.38 no.4
• /
• pp.823-828
• /
• 2018

The purpose of this study was to evaluate the suitability of the released water (RW) method for measuring water-holding capacity (WHC) by pressure and filter-paper absorption within two thin plastic films. One hundred fifty pork loins with considerable variations in WHC (three pork qualities: PSE, pale, soft, and exudative; RFN, reddish-pink, firm, and nonexudative; and DFD, dark, firm, and dry; 50 pork loins in each pork quality group) were used to measure drip loss (DL)% and RW % after applying different loads (1.5, 2.0, 2.5, 3.0 and 3.5 kg). Percentages of DL and RW were significantly (p<0.05) different among pork quality groups. The RW % of 2.5 kg load sample was significantly (p<0.05) higher than that of 2.0 kg or 1.5 kg load sample. However, there were no significant (p>0.05) differences in RW % among 2.5 kg, 3.0 kg, and 3.5 kg load samples for all three pork quality groups. The RW % was highly and positively correlated (r>0.95; p<0.001) with DL %. The highest correlation was observed between DL % and RW % of 2.5 kg load sample (r=0.97; p<0.001). Among all RW loads within each quality groups, the highest correlation between DL % and RW % was observed for 2.5 kg load sample (r=0.43, 0.66, and 0.46 for PSE, RFN and DFD quality groups, respectively, p<0.001). These results imply that applying 2.5 kg load is the best for determination of RW %. It is recommended as a reference method to assess DL % of pork muscles.

• Food Science of Animal Resources
• /
• v.43 no.3
• /
• pp.383-401
• /
• 2023

Camel milk has a significant and pivotal role in the diet of people residing in semi-arid and arid regions. Ever since ancient times, marketing of camel milk has remained insignificant due to nonexistence of processing amenities in the camel nurturing areas, hence the utilization of unprocessed camel milk has continuously remained limited at family level by the nomads. Due to the superior medicinal values and health promoting effects, incredible growth in the demand of camel milk and dairy products have been noticed all over the world during last two decades. Such emergence has led dairy industry to provide diversified camel dairy products to the consumers with superior nutritional and functional qualities. In contrast to bovine, very few food products derived from camel milk are available in the present market. With the advancements in food processing interventions, a wide range of dairy and non-dairy products could be obtained from camel milk, including milk powder, cheese, yogurt, ice cream, and even chocolate. In some regions, camel milk is used for traditional dishes such as fermented milk, camel milk tea, or as a base for soups and stews. Current review highlights the processing opportunities regarding the transformation of camel milk into various dairy products via decreasing the inherent functionality that could be achieved by optimization of processing conditions and alteration of chemical composition by using fortification method. Additionally, future research directions could be devised to improve the product quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.766-773
• /
• 2013

In this study, white bread was prepared with Shinan seomcho powder (SSP). Different amounts of SSP were tested (2, 4, 6 and 8%) to determine the optimal amount. The samples and a control were compared for quality characteristics, including pH, total titratable acidity, specific volume, baking loss, moisture content, water activity, color, textural characteristics, external and internal surface appearances, and sensory qualities. As the SSP increased, the total titratable acidity of the dough decreased (pH increased), and a decreased specific volume and baking loss was observed as well. However, the total titratable acidity and pH of the bread did not show significant differences among the samples. The moisture content was highest at a substitution level of 8%, and increased with increasing SSP contents. The crumb L value, a value, and resilience decreased with increasing SSP, whereas the crumb b value and hardness increased. Color, flavor, softness and overall acceptability were highest for the control group and were lowest for the 8% group. This likely reflects the high value of a grassy flavor, green tea taste, bitterness, astringency, and off-flavor at addition level of 8%. As a results, the optimum amount of SSP to add for baking bread would be 2~4%.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.2
• /
• pp.129-143
• /
• 1993

The objective of this study is to understand the status of the water pollution in rural areas and to furnish a basic material for the management of the water pollution in rural areas. For this purpose, the Bokha river basin, Ichon-Gun, Kyungki-Do considering as a typical agricultural area was selected as a representative experimental watershed. The characteristics of water pollution in streams of the Bokha river basin was revealed by investigating and analyzing data collected for the source of pollution, water qualities in reaches of the stream, the degree of contribution to the river contamination by pollution mass produced from each source, and the status of the self-purification at the main stream. The most important source of the water pollution in investigated watershed was livestock, and the next important one were in the order of population, land use, and industry. The water quality of the Bokha river was relatively favorable judging from the BOD and COD concentration, however since the concentration of T-N and T-P showed significantly large values, it was concluded that the river was seriously contaminated by the nutrient material. The main cause of the river contamination was proved due to livestock waste. For the T-N, both land use and livestock were much more contributied to the pollution than any other source, which characterized the typical water pollution of rural areas. Run-off ratios for the Bokha river tributaries to the main stream were changed according to the similar trend to the variation of discharges in the branch streams. For the value of the self-purification constant at the main stream, it showed smaller value in the downstream reach than the middle-stream and upstream reaches, where could possibly have smaller reoxidation action due to slower velocity and deeper water depth.