• 제목/요약/키워드: task Standardization

검색결과 83건 처리시간 0.021초

병원행정부서인력의 업무수행수준분석 (Performance of Administrative Personnel in Hospitals)

  • 김진순;손태용
    • 보건행정학회지
    • /
    • 제8권2호
    • /
    • pp.58-75
    • /
    • 1998
  • The hospital is characterized by it's remarkable labor industry and human resources input by unit. Recently, the administrative personnel are recognized as important staff to provide a hospital guidance to consumer and also easiness for consumer's visit to hospital. The objectives of this study is to find the performance of the administrative personnel in hospitals. The unit of analysis is the hospitals and data was collected form 144 staffs in 5 hospitals. Self administered questionnaire was given to analyze the general characteristics of staft such as age, sex, education, experience, and performance level in terms of frequency, ability, necessity of tasks. The major findings are as follows: 1. The 5 major tasks such as general affairs, insurance related affairs, hospital statistics, admission/discharge, and analysis of treatment cost were analyzed. Performance level of these tasks were not showed consistent level. It means that the same task was showed both high level performance and low level one. 2. The higher rates of performance level, ability and necessity were found, below 29 years of age, junior college graduates and university hospital than that of general one. 3. Factors mostly affected to performances were found as characteristics of hospital, age and education. 4. Concerning the various manpower management, On the job training, incentive mechanism and colose relationship among units were somewhat lack. In conclusion, most responded administrative personnel have performed actively in dealing with their tasks. however, the performance level and ability of the same task were showed differently, it means that such routine works were not standardized. Therefore, standardization and specification of tasks should be developed to strength the performance. Finally, this study is the first attempt to find out the performance of the administrative staffs and the study results imply that further study could be neeed to promote the performance of administrative personnel efficiently and effectively.

  • PDF

민군기술협력 촉진과 민군겸용기술사업 활성화 방안 (The Plan for Promotion of Civil and Military S&T Cooperation and Activation of Dual Use Technology Program)

  • 이춘근;송위진
    • 기술혁신연구
    • /
    • 제14권3호
    • /
    • pp.209-235
    • /
    • 2006
  • Since the end of the cold war, technical tie-up between private corporations and an army in developed countries has increased a lot, and the trend is spreading through developing countries rapidly. To cope with the circumstance actively, the dual use technology program for both private corporations and an army was begun in Korea in 1998. With the program, overlapping investment was resolved and technology transfer was stimulated. And the standardization and information exchange saved considerable national budget and made possible economic profit. Yet, the combination project of 4 ministries and offices showed problems such as loose cooperation and, low industralization record. However, developed countries are out of the mere stage of dual technology development and turn into broad technical tie-up including future prediction, national competitiveness improvement, and the private company's leading participation and they are systemizing them very fast. Korea also set up the national defense reform plan with the blueprint of future military force improvement, budget increase for national defense research, and increased participation of private corporations, and created Defense Acquisition program Administration to support them. The innovation of national defense system brings forward the need to link the private and military innovation. Korea has pursued the fast growth through assimilation, absorption, and improvement of foreign technology. But now, Korea has to focus on self innovation, original technology, parts and material. As this applies to private companies and military equally, it is important to concentrate limited resources for the effective technology cooperation. Considering this, the strategies to activate the dual use technology are program concept and range extension, task-deduction way improvement and future-oriented common task deduction, and promotion system improvement.

  • PDF

의료용 In-Body WBAN 시스템을 위한 Offset Phase Rotation Shift Keying 및 Phase Silence Sotation Shift Keying 변조 방식 (Offset Phase Rotation Shift Keying and Phase Silence Rotation Shift Keying Modulation for Medical In-Body WBAN Systems)

  • 최일묵;원경훈;김기윤;최형진
    • 한국통신학회논문지
    • /
    • 제37권5A호
    • /
    • pp.290-297
    • /
    • 2012
  • 본 논문에서는 의료용 In-Body Wireless Body Area Network (WBAN) 시스템을 위한 Offset Phase Rotation Shift Keying (OPRSK) 및 Phase Silence Rotation Shift Keying (PSRSK) 변조 방식을 제안한다. 현재 IEEE에서는 인체통신을 위한 WBAN 시스템을 802.15. Task Group (TG) 6로 지정하고 이에 관한 표준화를 진행하고 있다. 최근에는 WBAN 시스템의 전력 효율 향상을 위해 Phase Silence Shift Keying (PSSK), Phase Silence Position Keying (PSPK), 및 Phase Rotation Shift Keying (PRSK) 등의 변조 방식들이 제안되었으나, 기존의 방식들은 비선형 증폭기에 의한 왜곡에 취약한 단점이 있다. 따라서 본 논문에서는 심볼 구간의 전력 분산 및 성상도의 위상 옵셋을 통해 최대 위상 전이 범위를 제한함으로써 비선형 왜곡에 강인한 OPRSK 및 PSRSK 방식을 제안하며, 다양한 성능 분석을 통해 제안된 방식의 우수성을 입증하였다.

IP-기반 고정형 VoIP 긴급통화 시스템 설계 및 구현 (Design and Implementation of an IP-based Fixed VoIP Emergency System)

  • 고상기;천지훈;최선완;강신각;허미영
    • 정보처리학회논문지C
    • /
    • 제15C권4호
    • /
    • pp.245-252
    • /
    • 2008
  • VoIP 망에서 긴급통화 서비스는 기존의 유 무선 전화 서비스와 같이 필수 사항이다. 이를 지원하기 위한 표준화 작업이 활발히 진행되고 있으며, National Emergency Number Association (NENA)는 기존의 유 무선망에서의 긴급통화 서비스를 위한 프레임워크 및 프로시져를 개발하고 있다. 반면에 Internet Engineering Task Force (IETF)에서는 착발신이 모두 IP 환경을 고려한 긴급통신 프로토콜에 초점을 두고 있다. 그 결과, 두 모델 간에 불일치가 발생한다. 본 논문에서는 이를 해결하기 위해, NENA 구조를 채택하여 수정하고, 수정된 모델에 IETF 프로토콜을 적용할 수 있는 SIP 기반 VoIP 긴급통화 시스템을 설계하고 구현한다. 특히, 긴급 호를 다루는 재난방재센터 (PSAP, Public Safety Answering Point)는 기존 통신 환경 및 인터넷 환경 모두를 고려한다. 본 시스템은 유닉스 환경에서 구현된다.

전자산업 공정에서 사용한 부품, 기계류 세정(cleaning) 작업 안전보건 가이드 (Development of an Occupational Safety and Health (OSH) Guide for Safely Cleaning Contaminated Machinery, Equipment, and Parts Used in the Electronics Manufacturing Process)

  • 이승희;김소연;조경이;황영우;이경희;정광재;박동욱
    • 한국산업보건학회지
    • /
    • 제33권4호
    • /
    • pp.419-426
    • /
    • 2023
  • Objectives: This study aims to develop an Occupational Safety and Health (OSH) guide for the safe cleaning of contaminated machinery, equipment, and parts used in the electronics manufacturing process. Methods: A literature review, field investigations, and discussions were conducted. An initial draft of an OSH guide was developed and reviewed by experts with significant experience in maintenance work in the electronics manufacturing process in order to refine the guide. Results: Workers involved in cleaning processes with chemicals, solvents, and abrasive blasting can face exposure to a wide range of chemicals, abrasives, and noise. Identifying potential risks associated with each cleaning technique was an essential first step toward enhancing safety measures. The OSH guide comprises approximately eleven to twelve sections spanning 20-25 pages. It includes engineering and administrative protocols systematically organized to address the necessary actions before, during, and after cleaning tasks, depending on the technique. It is recommended that airline respirator masks be used in conjunction with an air purification system to ensure adherence to air quality standard "D" for atmosphere level. The use of an oil-free air compressor is advised, preferably a stationary model that does not rely on fuel sources like diesel. Conclusions: This OSH guide is designed to protect workers involved in maintenance activity in the electronics industry and aligns with global standards, such as those from the International Organization for Standardization (ISO) and Semiconductor Equipment and Material International, ensuring a higher level of safety and compliance.

항해장비 표준화모드 지침 개발을 위한 사용자 선호도 조사에 관한 연구 (A Study on User Preference Test for Development of Guidelines on Standardized Modes)

  • 안영중;전계정;정재훈;강남선
    • 한국항해항만학회지
    • /
    • 제42권6호
    • /
    • pp.371-377
    • /
    • 2018
  • 항해장비 표준화 모드는 안전항해에 필요한 정보들을 신속 정확하게 확인하기 위하여 주요 항해장비의 핵심기능과 화면표시, 작동법등을 표준화하는 기능이다. 국제해사기구는 표준화 모드의 항해장비 적용을 위한 지침 개발을 항해통신수색구조위원회의 과업으로 배정하여 진행 중에 있다. 본 연구는 표준화 모드 적용에 대한 실제 사용자들의 의견과 선호도를 조사하여 지침 개발에 반영하기 위해 수행되었다. 항해장비 중 ECDIS를 대상으로, 항해 업무를 수행하기 위해 필수적 또는 우선적으로 요구되는 정보 및 기능의 종류, 화면 구성, 메뉴트리의 사용자 선호도 조사를 위한 테스트 프로그램을 구성하였다. 웹 기반의 테스트 프로그램을 통해 35개국 333명의 선호도 조사를 실시하였으며, ECDIS 사용자들이 항해당직 수행 시 선호하는 다양한 ECDIS 정보의 내용과 화면배치들을 확인하였다. 연구의 결과는 표준화 모드에 고려할 사용자 요구 사항을 제시하여, 실효성 있는 지침 개발에 기여할 수 있을 것이다.

발달성 읽기 장애 진단을 위한 단어/비단어 읽기 검사와 글자기호감별검사의 표준화 연구 (STANDARDIZATION OF WORD/NONWORD READING TEST AND LETTER-SYMBOL DISCRIMINATION TASK FOR THE DIAGNOSIS OF DEVELOPMENTAL READING DISABILITY)

  • 조수철;이정범;정동선;신성웅
    • Journal of the Korean Academy of Child and Adolescent Psychiatry
    • /
    • 제14권1호
    • /
    • pp.81-94
    • /
    • 2003
  • 목 적:발달성 읽기 장애는 정상적인 읽기 능력의 현저한 발달 저하나 지속적인 오류를 보이는 질환이며, 학령기 아동의 $3{\sim}7$%에서 관찰된다. 기존에 사용되는 기초학습기능검사의 단점을 보완하고 발달성 읽기 장애의 진단과 평가를 위해 단어/비단어 읽기 검사와 글자기호감별검사의 신뢰도와 타당도를 검증하였다. 방 법:DSM-IV의 진단 기준과 임상적인 판단에 근거하여 읽기 장애 아동 63명(평균 연령 10.48세)과 정상 아동 77명(평균 연령 10.33세)을 대상으로 하였다. 이들에게 기초학습기능검사의 읽기 I과 II목을 실시하였고, 단어/비단어 읽기 검사와 글자기호감별검사를 시행하였다. 단어/비단어 읽기 검사는 각 100문항씩의 익숙한 단어와 의미를 갖지 않는 생소한 비단어를 각각 1.2초와 2.4초안에 읽도록 하여, 이를 통해 자동화된 음운 처리 능력과 의식적인 글자-음소 처리 능력을 평가하였다. 글자기호감별검사를 통해 읽기 장애 환자들이 오류를 일으키는 거울상 반전 글자들의 조합을 판별하는 능력을 검사하였다. 이들 검사의 내적 일치도 등의 신뢰도 검사와 공존타당도, 구성타당도, 판별타당도 등을 검증하였다. 결 과:단어/비단어 읽기 검사는 내적 일치도가 0.96으로서 신뢰할 수 있고, 기초학습기능검사와 0.94의 공존타당도를 나타내었으며, 단어와 비단어 모두 발달성 읽기 장애와 정상 아동을 통계적으로 구분할 수 있었고, 판별 분석에서 원집단에 속한 83.0%를 정확하게 판별할 수 있었다. 글자기호감별검사는 내적 일치도가 0.86으로서 신뢰할 수 있고, 기초학습기능검사와 0.86의 공존타당도를 나타내었으며, 요인 분석 결과 안구 운동 거울상 처리, 전반적 정확성, 거울상 반전 오류, 정지상 처리, 전반적 기민성 부족, 부주의-충동성 등의 여섯 요인으로 구성되어 있었다. 글자기호감별검사의 각 항목 별로 발달성 읽기 장애와 정상 아동을 통계적으로 구분할 수 있었으며, 판별분석에서 원집단에 속한 대상의 87.3%를 정확하게 판별할 수 있었다. 결 론:발달성 읽기 장애 아동은 읽기 과정의 자동적인 시각-의미 연결 기전과 의식적인 형태소-음소 상응 규칙 적용 능력 모두에서 장애를 보였으며, 거울상 반전 오류 등 시각적 정보 처리 기능의 장애도 나타내었다. 이들 장애는 단어/비단어 읽기 검사와 글자기호감별검사를 통해 신뢰할 수 있고 타당성 있게 구분하고 평가할 수 있었다.

  • PDF

UML을 사용한 온라인 게임 엔진 프로젝트 설계 연구 (Study On the Object Oriented Design Project of Online Game Engine Using UML)

  • 최성
    • 한국게임학회 논문지
    • /
    • 제5권1호
    • /
    • pp.33-40
    • /
    • 2005
  • 게임개발 프로젝트의 설계는 프로세스 구성과 게임 소프트웨어의 프로그램 산출물과 태스크의 관리는 개발자간에 연계하여 구성해야 한다. 기존 개임개발 프로젝트 설계는 프로젝트 활동의 정의 및 변경을 지원하고, 형상관리 도구는 버전제어, 작업공간 관리, 빌드 관리 등을 지원한다. 본 논문의 설계도구는 UML을 사용하여 게임 컴포넌트 기반 개발 프로세스 모델을 설계하고, 프로세스의 진행 상태 기록, 변경 요청에 따른 처리, 태스크별 작업 진행 보고서 작성, 산출물 등록과 변경, 버전 기록, 산출물 또는 서식 검색 등의 기능을 연구하였다. 또한 시스템 설계를 사용함으로써 게임 공학 활동에 참여하는 개발자들이 분산 개발 환경에서 게임 소프트웨어 개발에 필요한 정보와 산출물 관리를 생산성 있게 할 수 있다. 이 시스템 구성에 따라 정보를 공유하면서 설계의 체계화 및 표준화를 수행 할 수 있다.

  • PDF

UML을 사용한 온라인 게임 엔진 프로젝트 설계 연구 (Study On the Object Oriented Design Project of Online Game Engine Using UML)

  • 최성
    • 한국게임학회 논문지
    • /
    • 제4권3호
    • /
    • pp.21-28
    • /
    • 2004
  • 게임개발 프로젝트의 설계는 프로세스 구성과 게임 소프트웨어의 프로그램 산출물과 태스크의 관리는 개발자간에 연계하여 구성해야 한다. 기존 개임개발 프로젝트 설계는 프로젝트 활동의 정의 및 변경을 지원하고, 형상관리 도구는 버전제어, 작업공간 관리, 빌드 관리 등을 지원한다. 본 논문의 설계도구는 UML을 사용하여 게임 컴포넌트 기반 개발 프로세스 모델을 설계하고, 프로세스의 진행 상태 기록, 변경 요청에 따른 처리, 태스크별 작업 진행 보고서 작성, 산출물 등록과 변경, 버전 기록, 산출물 또는 서식 검색 등의 기능을 연구하였다. 또한 시스템 설계를 사용함으로써 게임 공학 활동에 참여하는 개발자들이 분산 개발 환경에서 게임 소프트웨어 개발에 필요한 정보와 산출물 관리를 생산성 있게 할 수 있다. 이 시스템 구성에 따라 정보를 공유하면서 설계의 체계화 및 표준화를 수행 할 수 있다.

  • PDF

A study on autonomy level classification for self-propelled agricultural machines

  • Nam, Kyu-Chul;Kim, Yong-Joo;Kim, Hak-Jin;Jeon, Chan-Woo;Kim, Wan-Soo
    • 농업과학연구
    • /
    • 제48권3호
    • /
    • pp.617-627
    • /
    • 2021
  • In the field of on-road motor vehicles, the level for autonomous driving technology is defined according to J3016, proposed by Society of Automotive Engineers (SAE) International. However, in the field of agricultural machinery, different standards are applied by country and manufacturer, without a standardized classification for autonomous driving technology which makes it difficult to clearly define and accurately evaluate the autonomous driving technology, for agricultural machinery. In this study, a method to classify the autonomy levels for autonomous agricultural machinery (ALAAM) is proposed by modifying the SAE International J3016 to better characterize various agricultural operations such as tillage, spraying and harvesting. The ALAAM was classified into 6 levels from 0 (manual) to 5 (full automation) depending on the status of operator and autonomous system interventions for each item related to the automation of agricultural tasks such as straight-curve path driving, path-implement operation, operation-environmental awareness, error response, and task area planning. The core of the ALAAM classification is based on the relative roles between the operator and autonomous system for the automation of agricultural machines. The proposed ALAAM is expected to promote the establishment of a standard to classify the autonomous driving levels of self-propelled agricultural machinery.