• International Journal of Precision Engineering and Manufacturing
• /
• 제4권2호
• /
• pp.30-38
• /
• 2003

This paper proposed PID controller for torch slider and PD controller for motor right wheel. to control the motion of two-wheeled welding mobile robot with seam tracking sensor touched on welding line. The motion control is realized in the view of keeping constant welding velocity and precise seam tracking even though the target welding line is on straight line or curved line. The position and direction of the body of the mottle robot are controlled by using signal errors between seam tracking sensor and body positioning sensor attached on the end of torch slider and body side of the mobile robot, respectively. In turning motion, the body and the torch slider are controlled by using the kinematic model related with two motions of body turning and torch sliding. The straight locomotion is controlled according to eleven control patterns obtained from displacements between two sensors of the seam tracking sensor and the body positioning sensor. The effectiveness is proven through the experimental results fur lattice type welding line. Through the experimental results, we can see that the position value of the electrode end point and the welding velocity are controlled almost constantly both in straight and turning locomotion.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.367-373
• /
• 2017

In this paper, a new shift map was proposed to improve the fuel economy of a transmission mounted electric device(TMED) type dual clutch transmission(DCT) plug-in hybrid electric vehicle(PHEV) by considering transmission and motor losses. To construct the shift map, powertrain efficiencies of the engine-DCT-motor were obtained at each gear step. A shift map that provides the highest powertrain efficiency was constructed for the given wheel torque and vehicle speed. Simulation results showed that the fuel economy of the target PHEV can be improved by the new shift map compared with the existing engine optimal operating line(OOL) shift control.

• 한국자기공명학회논문지
• /
• 제20권4호
• /
• pp.129-137
• /
• 2016

Transmembrane(TM) proteins are closely related to transport, channel formation, signaling, cell to cell interaction, so they are the crucial target of modern medicinal drugs. In order to study the structure and function of these TM proteins, it is important to prepare reasonable amounts of proteins. However, their preparation is seriously difficult and time-consuming due to insufficient yields and low solubility of TM proteins. We tried to produce large amounts of Syndecan-4 containing TM domain(SDC4-TM) that is related to the wound healing and tumor. Also, mutated SDC4-TM was studied to investigate structural change by modification of dimerization motif. We performed the structure determination by the Polarity Index at Slanted Angle (PISA) wheel pattern analysis based on $^{15}N-^1H$ 2D SAMPI-4 solid-state NMR of SDC4-TM and computational modeling using Discovery Studio 2016.

• 한국정보통신학회논문지
• /
• 제10권9호
• /
• pp.1718-1726
• /
• 2006

본 논문에서는 미지의 공간에서 장애물 검출시 스스로 회피를 계획하고 임무를 수행할 수 있는 자율주행 로봇의 주행 알고리즘을 퍼지제어기를 이용하여 설계하였다 장애물의 위치 와 거 리 인식을 위해 초음파센서를 사용하였으며 좌, 우측 바퀴의 각속도 출력 제어를 위하여 퍼지 제어기를 사용하였다. 퍼지제어기의 퍼지화 방법은 싱글톤 방법, 제어규칙은 각 바퀴 49개, 추론법은 간략화 된 Mamdani의 추론법, 비퍼지화 방법은 간략화된 무게중심 법을 사용하였다. 제안한 회피 알고리즘과 퍼지 제어기의 성능 및 실제 적용 가능성의 평가를 위해 이동로봇의 모델링에 근거 한 컴퓨터 시뮬레이션을 수행하였다. 그 결과 이동로봇이 목적지점에 정확히 도착함과 주행 중 인식한 장애물을 효과적으로 회피함을 보였다.

• 제어로봇시스템학회논문지
• /
• 제17권5호
• /
• pp.429-435
• /
• 2011

This paper presents a sensor fusion-based estimation of heading and a Bezier curve-based motion planning for unmanned ground vehicle. For the vehicle to drive itself autonomously and safely, it should estimate its pose with sufficient accuracy in reasonable processing time. The vehicle should also have a path planning algorithm that enables to adapt to various situations on the road, especially at intersections. First, we address a sensor fusion-based estimation of the heading of the vehicle. Based on extended Kalman filter, the algorithm estimates the heading using the GPS, IMU, and wheel encoders considering the reliability of each sensor measurement. Then, we propose a Bezier curve-based path planner that creates several number of path candidates which are described as Bezier curves with adaptive control points, and selects the best path among them that has the maximum probability of passing through waypoints or arriving at target points. Experiments under various outdoor conditions including at intersections, verify the reliability of our algorithm.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.67-72
• /
• 2005

In a park or street, we can see many people jogging or walking with their dogs that are chasing their masters. In this study, a pet robot that imitates dog's behavior is developed. The task of robot is to chase a person who is recognized as the master. The physical structure and the sensor system are designed for the task and environment. A three-wheel type locomotion system is designed as the robot's physical structure which can follow a person who is jogging in outdoor environment like a park. A sensor system, which can detect relative position of the master to the robot in highly dynamic and hazardous worlds, is developed. This sensor system consists of a signal transmitter which is held by the master and ultrasonic sensor array which are mounted on the robot. The transmitter emits RF (radio frequency) and ultrasonic signals simultaneously. The ultrasonic sensor array detects the signals and calculates direction and distance between the robot and the transmitter. The developed RF-ultrasonic sensor is evaluated through experiments. A purely reactive behavior-based control architecture is used for the robot. The behavior control performance of the robot is assessed in outdoor and indoor tests.

• 한국철도학회논문집
• /
• 제13권3호
• /
• pp.245-250
• /
• 2010

본 논문에서는 안정성과 안전성 해석을 통하여 차세대 고속철도(HEMU-400X)의 주행성능을 예측하였다. 차량의 설계단계에서 주행성능을 예측하는 것은 차량의 안전 확보를 위해 매우 중요하다. 안정성 해석을 통하여 차륜의 등가 답면구배에 따른 임계속도를 계산하였다. 임계속도는 UIC518에 근거하여 등가 답면구배 0.15에서 400km/h가 달성 가능함을 보였다. 또한 안전성 해석을 통하여, 동역학 모델의 횡방향과 수직방향의 가속도 값을 시뮬레이션 하였다. 안정성 해석은 UIC518에 근거하여 440km/h의 속도로 30km의 구간을 주행하였다. 그리고 계산된 값들은 모두 UIC518의 최대 허용 가속도 값보다 적게 나타나는 것을 확인하였다.

• 패션비즈니스
• /
• 제16권2호
• /
• pp.44-61
• /
• 2012

The 21st century directs designomics to achieve wealth by designing old beyond a simple recognition of the importance of culture. One of the representative local cultures of Gyeongnam is Gaya culture. The Gaya period had over 600 years history with rich and excellent iron manufacturing skill and advanced pottery culture. It is the very time to reevaluate the importance of Gaya equivalent to the Three Kingdoms in our ancient history which was has been so far ignored and isolated. In order to develop unique and excellent culture of Gaya as local fashion cutural goods, questionnaire survey on the recognition of Gaya culture and cultural goods purchasing status had been conducted to target visitors of Representative National Museum. Data Analysis Using SPSS 18.0 Win was performed with frequency analysis and t-test. As to the questionnaire survey, important criteria for purchasing in case of buying cultural goods could be found and the residents in Gyeongnam had higher recognition of developing cultural goods by the motif of Gaya relics. 'Mounted vessel in the shape of warrior on horseback(12.4%)' and 'Chariot wheel-shaped Pottery(10.8%)' were selected the most suitable motif, 'Cellphone strap(11.0%)' and 'key holder(10.2%), 'cup (7.2%)'were selected the most suitable item of cutural goods. These will be actively reflected in the development of fashion cultural goods design applying Gaya relics.

• 한국자동차공학회논문집
• /
• 제8권2호
• /
• pp.120-128
• /
• 2000

At the initial design stage of a new vehicle, the chassis layout has the most important influence on the overall vehicle performance. Most chassis designers have achieved the target performances by trial and error method as well as individual knowhow. Accordingly, a general procedure for determining the optimum location of suspension hard points with respect to the kinematic characteristics needs to be developed. In this paper, a method to optimize the toe angle in the double wishbone type front suspension of the four-wheel-drive vehicle is presented using the design of experiment, multibody dynamic simulation, and optimum design program. The handling performances of two full vehicle models having the initial and optimized toe angle are compared through the single lane change simulation. The sensitive design variables with respect to the kinematic characteristics are selected through the experimental design sensitivity analysis using the perturbation method. An object function is defined in terms of the toe angle among those kinematic characteristics. By the design of experiment and regression analysis, the regression model function of toe angle is obtained. The design variables which make the toe angle optimized ae extracted using the optimum design program DOT. The single lane change simulation and test of the full vehicle model are carried out to survey the handling performances of vehicle with toe angle optimized. The results of the single lane change simulation show that the optimized vehicle has the more improved understeer tendency than the initial vehicle.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.408-417
• /
• 2016

Purpose: Yield monitoring systems are an essential component of precision agriculture. They indicate the spatial variability of crop yield in fields, and have become an important factor in modern harvesters. The objective of this paper was to review research trends related to yield monitoring sensors for grain crops. Methods: The literature was reviewed for research on the major sensing components of grain yield monitoring systems. These major components included grain flow sensors, moisture content sensors, and cutting width sensors. Sensors were classified by sensing principle and type, and their performance was also reviewed. Results: The main targeted harvesting grain crops were rice, wheat, corn, barley, and grain sorghum. Grain flow sensors were classified into mass flow and volume flow methods. Mass flow sensors were mounted primarily at the clean grain elevator head or under the grain tank, and volume flow sensors were mounted at the head or in the middle of the elevator. Mass flow methods used weighing, force impact, and radiometric approaches, some of which resulted in measurement error levels lower than 5% ($R^2=0.99$). Volume flow methods included paddle wheel type and optical type, and in the best cases produced error levels lower than 3%. Grain moisture content sensing was in many cases achieved using capacitive modules. In some cases, errors were lower than 1%. Cutting width was measured by ultrasonic distance sensors mounted at both sides of the header dividers, and the errors were in some cases lower than 5%. Conclusions: The design and fabrication of an integrated yield monitoring system for a target crop would be affected by the selection of a sensing approach, as well as the layout and mounting of the sensors. For accurate estimation of yield, signal processing and correction measures should be also implemented.