• 산경연구논집
• /
• 제12권10호
• /
• pp.31-41
• /
• 2021

Purpose: This study estimates the threshold values of institutional quality through investigating the non-linear effect of six sub-indices of Worldwide Governance Indicators on FDI inflows in 34 developing countries in Asia and Eastern Europe over the period from 2000-2017. Research Design, data and methodology: GMM EGLS is employed which does not include the lagged value of the dependent variable as an independent variable. As a proxy for the institutional quality, either one of the six sub-indices of WGI from World Bank or the composite index obtained through a principal component analysis is used in a separate model. Results: An improvement in institutional quality, when the quality stays below a certain threshold level, does not increase FDI inflows, and only when the quality is above the threshold, it can positively influence FDI inflows. The threshold values of political stability and absence of violence, government effectiveness, and rule of law are relatively higher than those of the other dimensions of WGI. Conclusion: Institutional quality of the developing economies of Asia and Eastern Europe has a non-linear effect on FDI inflows. The target countries need to upgrade their institutional quality above the threshold in order to attract more FDIs.

• 대한방사선기술학회지:방사선기술과학
• /
• 제35권3호
• /
• pp.255-263
• /
• 2012

본 연구에서는 AAPM TG-119 보고서를 통해 본원에 도입된 세기조절방사선치료(IMRT)와 부피적세기조절회전치료(VMAT)의 치료 전 환자별 정도관리(patient specific QA)를 시행하고자 하였다. 본원의 치료계획장치를 이용해 각각의 치료계획을 수립하여 절대선량은 표적 및 위험장기에 전리함을 이용해 측정하였고 상대선량분포는 $DELTA^{4PT}bi$-planar diode array를 사용하여 측정하였다. 치료계획의 평가는 선량체적히스토그램을 이용하였고 선량검증은 측정값과 계산값을 비교하여 시행하였다. 치료계획평가에서 전립선의 경우에는 두 치료법 모두 표적과 위험장기의 목표선량에 도달하였으며 두경부와 Multi target의 경우, 세기조절방사선치료는 표적에서는 목표선량에 도달하지 못하였지만 부피적세기조절 회전치료는 표적과 위험장기 모두 목표선량에 도달하였다. C-shape(easy)은 두 치료법이 표적과 위험장기 모두 목표선량에 도달하였고, C-shape(hard)의 경우엔, 두 치료법이 표적에서는 목표선량에 도달하였으나 위험장기에서는 목표선량에 도달하지 못하였다. 절대선량평가에서는 세기조절방사선치료의 경우 평균오차율의 평균값이 표적에서 $1.24{\pm}2.06%$, 위험장기에서 $1.4{\pm}2.9%$였고 신뢰구간은 표적에서 3.65%, 위험장기에서 4.39%였다. 부피적세기조절회전치료는 평균오차율의 평균값이 표적에서 $2.06{\pm}0.64%$, 위험장기에서 $2.21{\pm}0.74%$ 였고 신뢰구간은 표적에서 4.09%, 위험장기에서 3.04%로 두 치료법 모두 제안된 허용기준인 표적에서 4.5%, 위험장기에서 4.7% 이내였다. 상대선량평가에서는 세기조절방사선치료의 경우 허용기준을 통과하는 감마인덱스의 평균값은 $98.3{\pm}1.5%$였고 신뢰구간은 3.78%였다. 부피적세기조절회전치료의 경우엔 평균값이 $98.2{\pm}1.1%$였고 신뢰구간은 3.95%로 두 치료법 모두 제안된 허용기준인 7.0% 이내였다. 따라서 이번 연구에서 실시한 시험을 통해 본원의 세기조절방사선치료와 부피적세기조절회전치료가 보고서에서 제안된 허용기준에 모두 부합하고 사용에 적합함을 확인할 수 있었다.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.773-787
• /
• 2020

In the injection molding process, the controlling stability of products quality is a very important factor in terms of productivity. Even when the optimum process conditions for the desired product quality are applied, uncontrollable external factors such as ambient temperature and humidity cause inevitable changes in the state of the melt resin, mold temperature. etc. Therefore, it is very difficult to maintain prodcut quality. In this study, a system that learns the correlation between process variables and product weight through artificial neural networks and predicts process conditions for the target weight was established. Then, when a disturbance occurs in the injection molding process and fluctuations in the weight of the product occur, the stability control of the product quality was performed by ANN predicting a new process condition for the change of weight. In order to artificially generate disturbance in the injection molding process, controllable factors were selected and changed among factors not learned in the ANN model. Initially, injection molding was performed with a polypropylene having a melt flow index of 10 g/10min, and then the resin was replaced with a polypropylene having a melt floiw index of 33 g/10min to apply disturbance. As a result, when the disturbance occurred, the deviation of the weight was -0.57 g, resulting in an error of -1.37%. Using the control method proposed in the study, through a total of 11 control processes, 41.57 g with an error of 0.00% in the range of 0.5% deviation of the target weight was measured, and the weight was stably maintained with 0.15±0.07% error afterwards.

• 한국대기환경학회지
• /
• 제13권1호
• /
• pp.19-29
• /
• 1997

It is more likely that the degree of air quality degradation that we have faced would be much lessen, if integrated management of air pollution control and assessment had been fully enforced by the local administrations, not by the centralized environmental agency in the first place. As the selfgoverning local administrations have been established since 1995, the need for air quality control by the local administration or local agency is getting the ground. However, in practice, air quality control by the local administration rarely put into effect due to lack of basic data which cover the present trends of air quality in each local city or county and are necessary for decision making. The emissions of SO$_2$ in each city and county of Korea in 1993 were calculated in this study, based on energy consumptions and emission factors. The ambient concentrations of SO$_2$ also were estimated by applying modified Miller-Holtzworth model. Observed and estimated concentrations of SO$_2$ showed that about 17.5 percents of cities and counties in the country were more polluted than the target value, 20ppb/year. The emissions and ambient concentrations of SO$_2$ in each city and county in 2000, 2005, and 2010 were also forecasted, assumed business as usual senario. It was shown that, in 2010, the emissions of SO$_2$ will be 2.8 times more than those of 1993 and much of them are from industrial sector. Also shown that 38.3 percents of cities and counties will be more polluted than the target value and most of them are polluted areas in 1993. The methods and results of this study could be used in developing the efficient reduction strategies in each city and county.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권3호
• /
• pp.186-197
• /
• 2012

새만금호 내부개발에 따른 호 내측의 수리특성과 수질환경 영향을 분석하기 위해 EFDC 모형을 이용한 심층적인 수치모의가 수행되었다. 개발이 진행되면서 방수제 및 준설 영향으로 표 저층간의 흐름특성이 변화된다. 특히 관리수위 적용에 따른 제한적인 배수갑문 운영은 기존과 다르게 표 저층간 성층발달을 심화시켜 새만금호 내측의 수질환경을 악화시키는 주요 인자로 확인되었다. 무작위행보에 의한 입자추적방법을 이용한 내부 체류시간 분석을 통해 확인된 특성은 평수시와 홍수시 그 특성이 크게 다르지만, 만경호 북측구역은 일종의 사대로 변화되어 오염물질이 장기간 체류되면서 침적된 저니층의 용출로 인해 수질환경이 악화되는 주요 원인으로 작용할 것으로 추론되었다.

• 상하수도학회지
• /
• 제33권6호
• /
• pp.469-480
• /
• 2019

This study was conducted to evaluate the degradation and mineralization of PPCPs (Pharmaceuticals and Personal Care Products) using a CBD(Collimated Beam Device) of UV/H₂O₂ advanced oxidation process. The decomposition rate of each substance was regarded as the first reaction rate to the ultraviolet irradiation dose. The decomposition rate constants for PPCPs were determined by the concentration of hydrogen peroxide and ultraviolet irradiation intensity. If the decomposition rate constant is large, the PPCPs concentration decreases rapidly. According to the decomposition rate constant, chlortetracycline and sulfamethoxazole are expected to be sufficiently removed by UV irradiation only without the addition of hydrogen peroxide. In the case of carbamazepine, however, very high UV dose was required in the absence of hydrogen peroxide. Other PPCPs required an appropriate concentration of hydrogen peroxide and ultraviolet irradiation intensity. The UV dose required to remove 90% of each PPCPs using the degradation rate constant can be calculated according to the concentration of hydrogen peroxide in each sample. Using this reaction rate, the optimum UV dose and hydrogen peroxide concentration for achieving the target removal rate can be obtained by the target PPCPs and water properties. It can be a necessary data to establish design and operating conditions such as UV lamp type, quantity and hydrogen peroxide concentration depending on the residence time for the most economical operation.

• 한국지능시스템학회논문지
• /
• 제17권7호
• /
• pp.945-951
• /
• 2007

잡음의 제거는 음성을 인터페이스로 하는 기기들에 필수적이라고 할 수 있다. 실질적으로 통화 품질이나 음성 인식률은 음성 입력부의 주변에서 들어오는 원치 않는 가산성 잡음에 의해서 크게 열화된다. 본 논문에서는 기본적으로 두 개의 마이크로폰을 이용한 잡음제거 방법을 제안한다. 마이크를 여러 개 사용했을 때의 장점은 방향 정보를 이용할 수 있다는 것인데 이는 사람 목소리, 음악 소리 등의 비정상성 잡음을 제거하는 데에 유용하다. 제안된 잡음제거 알고리즘은 위너필터에 기반 한다고 볼 수 있다. 위너필터에 의한 잡음제거를 위해서는 검출하고자 하는 음성과 제거하고자 하는 잡음의 주파수 응답이 동시에 추정 가능해야 한다. 이를 위해서 주파수 영역에서 스펙트럼 분류를 시행하여 위너필터 기반의 잡음제거에 필요한 정보를 얻는다. 제안된 알고리즘을 이용한 성능은 잘 알려진 프로스트 (Frost) 알고리즘 및 적응 모드 컨트롤러를 갖는 generalized sidelobe canceller (GSC)와 비교하였다. 성능의 지표로는 객관적 음질 평가의 방법 중에서 널리 쓰이고 있는 perceptual evaluation of speech quality (PESQ) 및 음성 인식률이 사용되었다.

• 한국환경과학회지
• /
• 제22권7호
• /
• pp.905-913
• /
• 2013

We compared the applicability and economical efficiency of peroxone process with those of ozone process in the existing water treatment plant on downstream of Nakdong River. After comparing the peroxone process for removing geosmin with the ozone process in lab scale test, peroxone process showed much higher removal efficiency than the ozone process at the same ozone dosage. Proper range of $H_2O_2/O_3$ ratio were 0.5~1.0 and the half-life of geosmin was about 5.5~6.8 min when the $H_2O_2/O_3$ ratio was set to 0.5 during 1~2 mg/L of ozone dosage. Peroxone process could reduce the ozone dosage about 50 to maximum 30% for the same geosmin removal efficiency compared to the ozone process in the pilot scale test. In case of 1,4-dioxane treatment, peroxone process could have 3~4 times higher efficiency than ozone process at the same ozone dosage. The results of estimating the economical efficiency of ozone and peroxone process for treating geosmin and 1,4-dioxane by using pilot scale test, in case of the removal target was set to 85% for these two materials, the cost of peroxane process could be reduced about 1.5 times compared to ozone process, and in the same production cost peroxone process could have 2~3 times higher removal efficiency than ozone process. The removal efficiency by peroxone process showed a large difference depending on the physicochemical characteristics of target materials and raw water, therefore detailed examination should be carried out before appling peroxone process.

• 산업경영시스템학회지
• /
• 제44권1호
• /
• pp.45-50
• /
• 2021

Machines and facilities are physically or chemically degenerated by continuous usage. The representative type of the degeneration is the wearing of tools, which results in the process mean shift. According to the increasing wear level, non-conforming products cost and quality loss cost are increasing simultaneously. Therefore, a preventive maintenance is necessary at some point. The problem of determining the maintenance period (or wear limit) which minimizes the total cost is called the 'process mean shift problem'. The total cost includes three items: maintenance cost (or adjustment cost), non-conforming cost due to the non-conforming products, and quality loss cost due to the difference between the process target value and the product characteristic value among the conforming products. In this study, we set the production volume as a decreasing function rather than a constant. Also we treat the process variance as a function to the increasing wear rather than a constant. To the quality loss function, we adopted the Cpm+, which is the left and right asymmetric process capability index based on the process target value. These can more reflect the production site. In this study, we presented a more extensive maintenance model compared to previous studies, by integrating the items mentioned above. The objective equation of this model is the total cost per unit wear. The determining variables are the wear limit and the initial process setting position that minimize the objective equation.

• KIEAE Journal
• /
• 제10권3호
• /
• pp.37-42
• /
• 2010

Together with the concern about the indoor air quality as sick house syndrome, the Ministry of Environment announced "Indoor Air Quality Control Law for the Multi Purpose Facility," which made the interests to be focused in the urgent understanding of current condition and preparation of measures about the indoor air pollution. The law was revised to obligatorily notify the amount of Formaldehyde and Volatile Organic Compounds in the case of newly constructed apartments with more than 100 houses. School also have its own indoor air quality guideline. Indoor air quality in school is very important because, children who very weak to indoor pollutants reside long time in there. The purpose of this paper is to to survey indoor air quality in school by field measurement. Field measurements were performed in 11 schools which were selected from 3 major cities(Incheon, Dae-jeon, chuncheon) in korea, Totally concentration of indoor pollutants were determined in 32 classroom. Target air pollutants were TVOC, formaldehyde, dust, CO, CO2. For the result of this investigation, Indoor air quality in classroom was very poor and it was found that some pollutants(TVOC, float bacteria) exceed the guideline.