• Composites Research
• /
• 제12권2호
• /
• pp.91-100
• /
• 1999

고상공정법(SSP)에 의한 고강도폴리에틸렌(HSPE) 섬유의 제조는 초고분자량 폴리에틸렌 분말의 압출과 연신으로 용매를 사용하지 않고 제조된다. 고상공정으로 제조된 고강도 PE 테이프사의 특성을 분석한 결과, 고강도 PE 테이프사는 여신비의 증가에 따라 인장강도가 증가하였고, 파단면에서 fibril 분리현상이 많이 생겼다. 고강도 PE 테이프사의 표면을 산소플리즈마로 처리하여, 표면에너지를 측정하였고, 수지와 계면결합력을 분석한 결과, 100W와 5분간의 플라즈마 처리에서 가장 높은 계면결합력을 나타내었다. 고강도 PE 테이프사 강화복합재료의 물성을 겔방사법으로 제조된 고강도 PE 섬유강화 복합재료의 물성과 비교하여 고찰하였다.

• 융합정보논문지
• /
• 제7권4호
• /
• pp.75-81
• /
• 2017

정보기술의 디자인 트렌드는 시대에 따라 빠르게 변해왔으며, 최근의 정보 디스플레이의 디자인 트렌드는 베젤리스 디스플레이가 대세이다. 베젤리스 또는 에지리스 디스플레이는 휴대폰 디스플레이의 새로운 트렌드로 부상하고 있다. 본 논문에서는 이른바 베젤리스 디스플레이라고 불리는 기기 면적 대비 높은 화면 비율을 갖는 터치패널 디스플레이의 조립 공정에 적합한 차광 테이프를 개발하였다. 차광 테이프는 자외선 경화형 아크릴계 감압성 점착제를 PET 필름 위에 롤투롤 공정으로 코팅하여 제조하였다. 자외선 경화형 감압성 점착제는 톨루엔을 전혀 사용하지 않는 친환경적인 제조 방법으로 합성되었다. 제조된 차광 테이프의 점착력은 자동화된 인장시험기로 분석하였으며, 형상유지 특성인 칙소성은 주사 전자 현미경으로 분석하였다. 그 결과 제조된 차광 테이프는 터치패널 디스플레이의 조립 공정에 적합한 높은 점착력과 우수한 칙소성을 나타내었다. 이러한 기능성 차광 테이프의 개발은 그 동안 차광 테이프의 칙소성 부족으로 인하여 야기되었던 터치 패널 디스플레이 조립 공정의 생산성향상 및 품질안정성 향상에 기여할 것으로 기대된다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권2호
• /
• pp.15-18
• /
• 2007

The sub micron sized spherical $MgB_2$ powders were synthesized by spray reaction method. $MgB_2$ tapes with Al addition were fabricated by Powder in Tube (PIT) method. The superconducting property and microstructure of Al doped $MgB_2$ tapes were characterized by X-ray diffraction, optical microscopy and transport measurement under magnetic field. The $J_c$ value of $MgB_2$ tapes was increased with 10 vol. % Al addition. The $J_c$ value of 5,500 A/$cm^2$ and 11,000 A/$cm^2$ at 4.2 K and 5 T were obtained for the $MgB_2$ tape and 10 vol. % of Al added $MgB_2$ tape without heat treatment, respectively. The $J_c$ value of 8,000 A/$cm^2$ and 33,000 A/$cm^2$ at 4.2 K and 5 T were obtained for the $MgB_2$ tape and 10 vol. % of Al added $MgB_2$ tape with heat treatment, respectively. The $J_c$-B curves show enhancement in $J_c$ (B), which suggests that the microstructure and transport properties of $MgB_2$ tapes have been improved with Al addition.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권2호
• /
• pp.103-108
• /
• 2007

본 연구에서는 압전 특성과 표면전위계를 이용한 응력측정 방법을 제안하였다. 다시 말하면 이 응력측정방법은 압전소자에서 발생한 전위를 표면전위계로 측정하게 하는 방법으로서, 이 표면전위는 구조물 부재의 변형률에 비례한다는 특성을 이용하여, 구조물 부재의 각 위치에서의 발생하는 응력을 변형률로부터 계산할 수 있게 된다. 또한, 구조물 부재의 응력분포를 보다 간편하게 구하기 위해서 비접촉 측정법을 이용한 응력분포 측정 Tape를 제작하였다. 특히, 이 Tape는 균열이나 홈과 같이 이상응력 발생 가능한 위치에서의 ${\sigma}_x$, ${\sigma}_y$, ${\tau}_{xy}$의 응력을 측정 뿐만 아니라 국부 응력해석에 활용되었고 그 적용성을 검토하기 위해서 홈이 있는 실험편에 대해서 반복하중 시험결과와 FEM 해석의 결과와 비교 분석하였다.

• 한국세라믹학회지
• /
• 제34권10호
• /
• pp.1083-1091
• /
• 1997

반응성이 좋은 미분말의 고온 초전도상을 얻고자 액상 합성법 중의 하나인 옥살산염법을 이용하였다. 본 방법을 사용하여 합성 분체의 초기 형상과 입도를 제어하였고, 개선된 균일성을 가진 Bi(Pb)-Sr-Ca-Cu-O 초전도 분말을 제조할 수 있었다. 합성된 산화물 초전도체 분말의 특성 및 pellct으로 성형후 열처리한 시편의 미세구조와 전기적특성을 조사하였다. 또한, Tape casting법에 의해 후막을 제작하여 미세구조와 전기적 특성을 관찰하였다. 합성된 분말의 입자 크기는 100~300nm 이하의 구형이었으나 대부분이 1~3 ${\mu}{\textrm}{m}$ 크기로 응집되어 있었다. 84$0^{\circ}C$로 72시간 동안 열처리한 괴상 시편의 임계저항온도는 110K였으며, 열처리한 후막의 임계전류는 각각 0.6A, 1.9A였다.

• 한국전기전자재료학회논문지
• /
• 제19권9호
• /
• pp.832-837
• /
• 2006

Antennas were fabricated by physical(adhesive) and chemical(deposition+plating) method on organic-inorganic composite material. And antennas were measured dielectric constant and gain. Dielectric constant of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness and number of conduction material composition. But antennas were fabricated by chemical method was reached to 90 % of dielectric material. Gain of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness. But they were unrelated with conduction material composition. The other side antennas were fabricated by chemical method excelled more 0.8 dBic than antennas were fabricated by physical method in gain of antenna. Finally, chemical method can expect excellent product process because it can produce smaller size, higher gain and elimination of many handworks.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권2호
• /
• pp.9-12
• /
• 2010

A lamination system using reflow soldering was developed to enhance the mechanical properties of high temperature superconductor (HTS) tape. The laminated coated conductor tape was fabricated using the continuous lamination process. The mean, maximum, and minimum tensile loads in a T-peel test of the laminated coated conductor were 9.9 N, 12.5 N, and 7.6 N, respectively. The critical current ($I_c$) distributions of the non-laminated and laminated coated conductor were compared using anon-contact Hall probe method. The transport $I_c$ nearly matched the non-contact $I_c$; however, some degraded Ic regions were found on the length of 800 cm of laminated coated conductor. We confirmed that the cause of the partially degraded $I_c$ was due to an increase in line tension by (1) solidification induced by a change of composition that usually occurs in molten brass (Cu, Zn) in solder, or (2) non-homogeneity of the thickness of the coated conductor or metal tapes. We suggest that reflow soldering is a promising method for reinforced HTS tape if the controlling solder thickness and lamination guide are modified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1228-1230
• /
• 2005

This paper deals with design of heater trigger switching in a persistent current system(PCS) by finite element method(FEM) analysis of YBCO coated conductor(CC) tape. Most promising superconducting wire is YBCO coated conductor tape in these days for its high n value and critical current independency from external magnetic field. It is expected to be used many superconducting application such as fault current limiter and cable etc. The superconducting magnet which is operated in persistent current mode in SMES, NMR, MRI and MAGLEV has many advantages such as a high uniformity of a magnetic field and reducing a thermal loss. A PCS system consists of magnet power supply (MPS) which energized current to a magnet, heater, a coated conductor tape for switching, and superconducting magnet. In this paper, the characteristic of thermal quench of the YBCO CC tape and BSCCO tape by heater trigger analyzed by FEM. And optimal length of heater is calculated by temperature and time analysis. This heater trigger analysis is expected to be a basic concept of PCS application design.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.262-268
• /
• 2002

Statement of problem. In-Ceram system is one of the all-ceramic crowns that can be used in anterior 3 unit fixed partial dentures and posterior single crowns. The alumina core used in In-Ceram system is manufactured using slip-casting technique. The slip-casting technique is difficult and technique sensitive. To improve this problem, tape-casting method was introduced into dentistry. There were no studies to examine the effect of margin design on the margin fitness of all-ceramic crowns fabricated from alumina tape. Purpose. The purpose of this study was to compare the marginal fitness of glass infiltrated alumina core fabricated from aqueous-based alumina tape according to different margin types ($90^{\circ},\;110^{\circ},\;135^{\circ}$ shoulder margin). Material and method. Three upper central resin incisors were prepared with $90^{\circ},\;110^{\circ}$, and $135^{\circ}$ shoulder margins for all-ceramic crowns, respectively. The resin teeth were duplicated and master die and special plaster die were made as usual. After alumina cores were fabricated from aqueous-based alumina tape, cores were cemented to each 15 epoxy dies replicated from three resin teeth with resin cement. These cemented cores were embedded in epoxy resin. Specimens were cut mesiodistally and buccolingually. Marginal gap and discrepancy were measured under microscope. Results. The marginal gap and discrepancy of $90^{\circ}$ marginal angle was $75.1{\mu}m,\;86.6{\mu}m,\;110^{\circ}$ marginal angle was $41.5{\mu}m,\;50.7{\mu}m$ and $135^{\circ}$ marginal angle was $51.7{\mu}m,\;54.2{\mu}m$, respectively. The smallest value was seen in 110 (angle, which was statistically significant compared to that of $90^{\circ}$ angle (p<0.05). Conclusion. Marginal fitness of alumina cores made of alumina tape with $110^{\circ}$ shoulder margin was best and others were clinically acceptable.

• 한국응급구조학회지
• /
• 제25권3호
• /
• pp.7-16
• /
• 2021

Purpose: The I-gel device is Korea's most frequently used airway management method during pre-hospital cardiopulmonary resuscitation (CPR). This study aimed to compare changes in ventilation volume according to the fixation method with a simulated manikin. Methods: We placed I-gel into an advanced life support simulator and compared tape and band fixation conditions. CPR was performed according to the 2020 Korean CPR guidelines, using a mechanical chest compression device and an adult bag. The positional shift of I-gel and the ventilation volume of the simulated manikin were measured after performing CPR for 20 minutes. Five trials were carried out in each setting. Statistical analysis was carried out with SPSS 27.0. P < .05 was considered significant. Results: Positional shift after 20 minutes of CPR was as follows: tape fixation, 7.2 ± 0.2 mm; band fixation, no change, indicating a significant difference between the two groups (p=.003). The mean ventilation volume was tape fixation, 482.63 ± 30.84 mL; band fixation, 544.96 ± 22.98 mL, showing a significant difference (p=.002). Conclusion: When using the I-gel during pre-hospital CPR, using a band-type fixing device with elasticity rather than fixing the tape provides stable and appropriate ventilation by maintaining the fixed position.