• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.86-92
• /
• 1997

Demand of LPG and LNG will increase continuously due to high calories, clearness, and convenience for usage. These gases are used widely for power plants, industrial plants, and domestic fuel. But accidents related with gas are increasing in proportion to increment of gas usage. Especially LPG has high ignitability due to weak dispersion to air and accumulation at low place because LPG is heavier than air. There are many hazards during transportation as well as production, storage, and usage of LPG. Commonly, tank lorry is used for inland transportation of LPG. If tank lorry were to raise leakage incidents and then LPG released during transporting, the accidents cause serious effects on the environment as well as human damage of surrounding area. In this study, therefore, hazards which cause LPG of tank lorry to leak during transportation were identified and risk of LPG transportation was assessed quantitatively. Also, the result of this study might be a useful measure for predicting damage and preparing safe transportation strategies of LPG tank lorry.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.42-47
• /
• 2008

It is important for national safety that tank lorry or bulk lorry which is carrying toxic gas or explosive materials should be monitored during the maneuvering from starting point to destination as well as vehicle or tank status. Therefore, we propose a safety monitoring system for tank lorry to check driving condition and the vehicle status. We studied the integration of central control system with in-vehicle computer system connected with various sensors for monitoring through a communication network.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.909-915
• /
• 2022

In this paper, a robot automation technology for chemical tank lorry unloading is presented. Handling chemical coupler between tank lorry and ACQC system may be hazardous or toxic to human operators, therefore robot automation is essential. Due to tight tolerance between couplers, even small pose error may result in very large internal force. In order to resolve the problem, compliance between male and female couplers should be introduced with 6-axis compliance device with F/T sensing. The proposed robot automation system consists of a collaborative robot, 6-ax is compliance device with F/T sensing, linear gripper, and robot vision. The position/force control algorithm and experimental results for assembling chemical couplers are presented.

• Journal of Korean Society of societal Security
• /
• v.1 no.1
• /
• pp.53-62
• /
• 2008

Recently, the potential risks of tank lorry transportation from the petrochemical plant have been increasing, so the research was performed to build up the evaluation criterion of the transportation safety, as well as aggressive risk+assessment of a variety of chemical materials. This research was applied to the Maximum Credible Accident Analysis technique and modeled on the risk management of chemical transportation using the following four steps for risk evaluation, firstly the comparison of representative fype and standard of hand ling chemical materials transported by tank vehicles secondly, specific classification of potential hazards thirdly, grasp and recognition of virtual accident scenario at last, the risk evaluation of virtual accident scenario(qualitative/quantitative - chemical release modeling).

• Journal of Environmental Health Sciences
• /
• v.47 no.2
• /
• pp.175-181
• /
• 2021

Objectives: The correlation between the size of a leak hole, the volume of the leakage, and the range of influence was investigated for a hydrochloric acid tank-lorry. Methods: For the case of a tank-lorry chemical accident, KORA (Korea Off-site Risk Assessment Supporting Tool) was used to predict the leak rate and the range of influence according to the size of the leak hole. The correlation was studied using R. Results: As a result of analyzing the leak rate change according to the leak hole size in a 35% hydrochloric acid tank-lorry, as the size of the leak hole increased from 1 to 100 mm, the leak rate increased from 0.008 to 83.94 kg/sec, following the power function. As a result of calculating the range of influence under conditions ranging from 1 to 100 mm in size and 10 to 60 minutes of leakage time, it was found that the range spanned from a minimum of 5.4 m to a maximum of 307.9 m. As a result of multiple regression analysis using R, the quadratic function model best explained the correlation between the size of the leak hole, the leak time, and the range of influence with an adjected coefficient of determination of 0.97 and a root mean square error of 22.33. Conclusion: If a correlation database for the size of a leak hole is accumulated for various substances and under various conditions, the amount of leakage and the range of influence can easily be calculated, facilitating field response activities.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.7 no.1
• /
• pp.41-43
• /
• 2009

A 52-year-old man was found dead in the driver's seat of his tank lorry. The tank lorry was used to transport industrial wastewater to a disposal plant; the material was transferred into a storage tank with the help of compressed air. The wastewater contained methylene chloride and 2-chloropyridine. No respiratory protective equipment was used while working under these conditions. The autopsy report showed extensive edema and congestion of the brain, lung, and intraperitoneal organs. The concentrations of methylene chloride in lung and brain were reported at 398 and 67 mg/kg, respectively.

• 한국가스학회:학술대회논문집
• /
• 2005.05a
• /
• pp.211-211
• /
• 2005

• Korean Architects
• /
• s.617
• /
• pp.56-61
• /
• 2020

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.213-221
• /
• 2024

Purpose: The purpose is to find the optimal way to quickly block the leak in the event of a leak accident in a tank lorry transporting hydrochloric acid aqueous solution, a hazardous chemical, and to carry out effective disaster prevention work to minimize damage caused by the leak. Method: We organized the overall characteristics of hydrochloric acid and accidents that occurred during transportation by accident type and cause, and created a small tank that can be tested assuming a leak situation in a hydrochloric acid tanker, creating an environment similar to the leak situation, and leaking in various ways. I would like to experiment and organize blocking methods. Result: Through experiments, an effective leak blocking method was confirmed. We would like to summarize measures to quickly block a leak in the event of a leak and present the optimal disaster prevention plan that can be applied at the accident site. Conclusion: It has been confirmed that using a combination of adhesive tape and magnets is more effective in blocking leaks. Rapid response is possible by repeatedly training business emergency response teams and product transporters to appropriately select and respond to leak-blocking equipment. Additional research on various leak prevention methods is needed in the future.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.54-60
• /
• 2016

In this study, tank truck incidents of road transport of hazardous materials to experimental investigated the potential fire hazard. Real scale fire was to perform experiments for on this qualitative and quantitative data collection and analysis. Particularly affected by radiant heat from the flames caused and damage estimates range investigated accordingly. Flame temperature, internal temperature of tank and emitted radiation from the flames was investigated. The flame of light oil spill caused a fire at a temperature of about $300^{\circ}C$ high in comparison with the methanol by combustion of diesel and methanol, according to the difference, the flame duration changes varies depending on the Burning rate. Depending on spill rate(30, 60, 90 and $120{\ell}/min$) and the longer the duration of the flame important factors for the internal temperature of tank lorry rise was found. Road accident in a fire caused by leakage of hazardous was could the higher the damaged. Therefor, Fire suppression activities should be required in particular to be around.