• 한국세라믹학회지
• /
• 제34권12호
• /
• pp.1213-1220
• /
• 1997

Effect of particle size of alumina and amount of talc on tape casting and densification behaviors of alumina-talc system were investigated. The pseudoplastic behaviors of slurries increased with increase in amount of talc addition and decrease in alumina particle size. In case of using coarse alumina powder, densification of specimens were accelerated with increase of sintering temperature and amount of talc addition. On the contrary, fine alumina powder retarded of rearrangement of alumina particle during liquid phase sintering due to premature densification of alumina matrix region before formation of liquid phase and then densification of specimens were suppressed with increase of sintering temperature and amount of talc addition.

• 펄프종이기술
• /
• 제41권3호
• /
• pp.1-7
• /
• 2009

Talc as a coating pigment has been developed in order to replace GCC and clay for matte grade and has received much attention due to various advantages including good gravure printability. In order to elucidate the effects of talc on gravure printability, model papers were produced with three kinds of coating talc whose particle size and brightness are different. Physical properties related to surface and structure and the gravure printability of the sample were tested. Coating color with talc showed lower viscosity than that with clay. For both matte and art grades, talc tended to give lower gloss than day. The smaller the particle size of talc, the better properties in the coating color viscosity and water retention. When the particle size of talc was small enough, the surface roughness of the coated paper produced with talc was similar to that with clay while larger talcs produced rougher surface than clay. On top of that, application of talc improved compressibility and gravure printability of coated paper.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1308-1315
• /
• 1998

Effects of particle size of alumina on densification behavior during liquid-phase sintering of alumina-talc system were investigated with emphasis on particle rearrangement process. In the case of using coarse alu-mina powder densiication of specimens was rapidly accelerated after formation of liquid phase due to easy particle rearrangement process with addition of talc and increase of sintering temperature. On the contrary when fine alumina powder was used premature densification of alumina matrix region formed before for-mation of liquid phase rigid skeleton structure and then it seemed to inhibit rearrangement process during crease of sintering temperature. As results the densification of specimens using coarse alumina powder was higher than that of the case of using fine one.

• 한국광물학회지
• /
• 제31권1호
• /
• pp.47-55
• /
• 2018

활석은 T-O-T 구조의 함수 마그네슘 층상규산염 광물로서, 화학적 안정성과 흡착성 등의 특성을 가지고 있어 다양한 산업분야에서 첨가제, 코팅제 등으로 활용되어 왔다. 최근 나노 복합체의 안정성 향상을 위한 첨가제로서 활석 나노입자가 각광받고 있다. 본 연구에서는 고에너지 볼 밀을 이용하여 기계적인 방법으로 활석 나노입자를 형성하고, 분쇄시간에 따른 입자크기 및 결정도의 변화를 알아보고자 하였다. X-선 회절 분석 결과, 분쇄가 진행됨에 따라 활석의 피크 폭이 점진적으로 증가하여 720분 분쇄 후, 활석은 비정질에 가까운 X-선 회절패턴을 보여준다. 레이저회절 입도 분석 결과, 약 $12{\mu}m$이었던 활석의 입도는 분쇄가 진행됨에 따라 약 $0.45{\mu}m$까지 감소하였으나, 120분 이상 분쇄를 진행하여도 뚜렷한 입도의 감소가 관찰되지 않았다. 반면, BET 비표면적은 분쇄 720분까지 꾸준히 증가하여, 분쇄에 따른 입도 또는 형태의 변화가 지속적으로 일어남을 지시한다. 주사전자현미경 및 투과전자현미경 관찰 결과, 720분 분쇄 후 약 100~300 nm 내외의 층상형 입자들이 마이크로 스케일의 응집체로 존재함을 확인하였다. 이와 같은 결과는 분쇄시간이 증가함에 따라 활석의 입자크기 및 형태는 지속적으로 변화하지만, 나노입자의 특성상 재응집이 일어나 마이크로 크기의 응집체를 형성하고 있음을 지시한다. 또한 활석의 분쇄에서 판의 크기, 즉 a축, b축 방향의 길이는 감소 한계가 존재하며, 분쇄가 진행될수록 판의 두께, 즉 c축 방향의 길이 감소가 주된 분쇄 메커니즘으로 생각된다. 본 연구의 결과는 나노 활석의 형성 메커니즘에 대한 이해를 고양할 수 있을 것으로 기대된다.

• 공업화학
• /
• 제9권7호
• /
• pp.961-967
• /
• 1998

종이제조에 있어서 종이의 광학적 성질 및 인쇄적성을 개선하기 위하여 여러 종류의 충전제가 사용되고 있다. 본 연구는 신문용지 제조에 있어서 여러 종류의 충전제, 즉 경질탄산칼슘(PCC), 중질탄산칼슘(GCC), 그리고 혼합된 충전제(PCC+미세활석(MVP) 또는 활석(talc), GCC+MVP 또는 talc))를 종이에 충전시켰을 때 종이의 여러 물성에 미치는 영향을 검토하였다. 얻어진 결과를 요약하면 다음과 같다. 1) 충전제를 지료전건중량당 5% 처리시 동일 처리조건하에서의 충전제 보류율은 PCC 처리시 GCC 처리시보다 16.8% 정도 높게 나타났으며, PCC 및 GCC를 처리했을 때 모두, 배합한 충전제의 입자경이 커질수록($PCC{\leq}GCC<MVP<talc$) 보류율이 증가하는 경향을 나타내었다. 2) PCC 처리시 무처리보다(92.2%) 대비 2.3% 이상의 비교적 높은 불투명도 개선효과를 나타내었으며, 배합한 충전제의 평균 입자경이 클수록 불투명도가 감소하는 경향을 나타내었다. 3) PCC 단독 처리시 GCC 단독 처리시보다 소폭의 인열강도 하락을 나타내었으며 20% 배합처리한 충전제의 평균 입자경이 커질수록 인열강도가 증가하는 경향을 나타내었다. 4) PCC 단독처리시 비교적 높은 인장강도를 나타내었으며, 다른 충전제와 혼합처리시 인장강도의 하락폭은 GCC 처리쪽이 적은 것으로 나타났다. 5) PCC를 처리하였을 경우, 배합한 충전제의 입자경이 커질수록 ($PCC{\leq}GCC<MVP<talc$) 파열강도는 직선적으로 감소하였다. 6) 충전제를 처리하였을때 무처리보다 비교적 우수한 인쇄적성 효과를 나타내었다.

• 한국광물학회지
• /
• 제32권3호
• /
• pp.201-211
• /
• 2019

단층 비지는 단층의 미끌림에 의해 입도와 결정도가 낮아지는 특성을 가지는 것으로 알려져 있다. 활석을 비롯한 층상규산염 광물은 단층 비지에 존재하며 단층 약화에서 중요한 역할을 할 수 있는데, 특히 광물 표면에 흡착된 물분자의 존재 여부에 따라 마찰계수가 달라진다. 본 연구에서는 고에너지 볼 밀을 이용해 입도와 결정도를 체계적으로 변화시킨, 분쇄 전후 활석의 함수율과 탈수반응 거동의 변화를 통해 활석이 단층 약화에 미치는 영향에 대해 알아보고자 하였다. 적외선 분광분석 및 열분석 결과, 분쇄 전 활석은 소수성을 띠며 물분자가 거의 존재하지 않는다. 이후 최대 720분까지 진행된 분쇄를 통해 입도가 약 100~300 nm 내외까지 감소하고 비정질화가 진행된 활석에서는 물분자에 의한 함수량이 분쇄 전에 비하여 약 8 wt.% 증가하였다. 또한 분쇄된 시료를 가열할 경우, 분쇄 전에 비하여 기화되는 수증기의 양이 증가한다. 입도 및 결정도 감소에 따라 탈수산기 반응 온도도 분쇄 전 약 $900^{\circ}C$에서 720분 분쇄 후 약 $800^{\circ}C$로 감소하였다. 이와 같이 분쇄된 활석의 입도 및 결정도 감소에 의해 소수성이 친수성으로 바뀌며 층상 규산염 광물의 마찰계수를 낮출 것으로 생각된다. 지진 사이클을 통해 반복되는 단층의 미끌림은 지속적으로 단층 비지에 존재하는 활석의 마찰 계수를 낮출 것으로 생각되며, 오래된 단층이 점점 약화되는 원인에 대한 실마리를 제공할 수 있을 것으로 기대된다.

• 한국세라믹학회지
• /
• 제14권4호
• /
• pp.215-225
• /
• 1977

In this study, we are observe to the sagger which is composed of cordierite-mullite system. And especialy, we investigated the characteristics of the body which composed of Chamotte-Kaolin-Plastic clay-Talc (or Clinochlore) system and Chamotte-Kaolin-Plastic clay-Agalmatolite-Talc (or Clinochlore) system. The obtained results are as follows. 1. Modulus of rupture and apparent porosity were improved by particle size of talc and clinochlore in order that -16 mesh, -6 mesh, 6-16 mesh. 2. When the body composed of talc, the modulus of rupture was increased as firing temperature was rising up but composed of clnochlore, it was reversed. 3. When added to the agalmatolite, firing shrinkage, modulus of rupture and apparent porosity were improved. 4. Mineral phases of samples fired at 125$0^{\circ}C$ above consist of cordierite, mullite and $\alpha$-cristobalite.

• 펄프종이기술
• /
• 제41권3호
• /
• pp.8-12
• /
• 2009

According to a previous study, talc as a coating pigment can improve the viscosity and the water retention of coating color, the compressibility of coating layer, and hence gravure printability. Talc is also well known for its larger particle size than other pigments, which implies that less binder may be need due to its smaller specific surface area. This study investigated the possibility of reducing binder content for matte grade paper. Coating color was prepared with the Cotalc-2000, which showed the best properties in the previous study. The binder content was varied and the effect of binder content on the physical properties of coated paper and the gravure printability was investigated. It was shown that binder content could be reduced when talc was used as a coating pigment. The reduction in binder content did not influence gloss, roughness and the print density of coated paper but showed improvement in paper porosity, compressibility and missing dot.

• Journal of Chest Surgery
• /
• 제56권5호
• /
• pp.353-358
• /
• 2023

Background: Malignant pleural effusion affects many patients with advanced cancer. When chemotherapy or radiotherapy fails to relieve malignant pleural effusion and related symptoms, drainage and pleurodesis can help. Although surgical talc pleurodesis is the most widely used method, Viscum album, which has been recently used in surgical or bedside procedures, has demonstrated significant results and is as effective as talc. This study aimed to determine the most effective agent and procedure. Methods: Between January 2015 and July 2022, chemical pleurodesis was performed in 137 patients with malignant pleural effusion, using a V. album surgical procedure in 48, a V. album bedside procedure in 55, and a talc surgical procedure in 34 patients. We reviewed patients' clinical responses and disease progression after chemical pleurodesis. Results: The success rate was not significantly different among the V. album surgical procedures (91.7%), V. album bedside procedures (83.6%), and talc surgical procedures (91.2%). However, the total drainage amount and tube insertion duration in both Viscum groups were more effective than those in the talc group. Furthermore, the bedside Viscum group showed significantly lower post-pleurodesis pain scores than the other 2 groups. Conclusion: According to our results, talc and V. album can be considered ideal agents for chemical pleurodesis. However, Viscum pleurodesis showed safer outcomes in terms of ensuring quality of life than talc. Additionally, the bedside Viscum group showed significantly lower pain scores than the other groups. Hence, patients for whom surgical procedures are inappropriate can undergo bedside Viscum pleurodesis without diminishing the therapeutic effect.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 춘계학술발표회 논문집
• /
• pp.251-263
• /
• 2011

This study was carried out in order to investigate the effect of pre-coating layer on top-coating layer. The coated paper with five different formulations were prepared. The properties of coated paper were measured and correlation between pre and top-coated layer was evaluated. Paper gloss was increased with addition of clay and GCC that has smaller particle size. Roughness was decreased with using smaller particle GCC, clay and talc. The highest thickness was obtained with talc. Brightness and whiteness of pre-coated layer were affected to top-coated layer. GCC 60 shows the highest and ununiform water adsorption during 1sec. The adsorption was higher with increasing coated weight. Talc shows the excellent water adsorption properties due to its wettability. These results indicate that final printability and properties of top coating layer can be controlled with adjusting pre-coating layer.