• 한국지반환경공학회 논문집
• /
• 제11권8호
• /
• pp.73-82
• /
• 2010

유리섬유복합관은 지중에 매설되기 때문에 토압 및 상재하중 등의 외력에 충분히 안전하게 설계되어야 하며, 관의 변형 및 침하에 대해서도 안정성을 확보하여야 한다. 이에 본 연구에서는 내압 및 외압에 대한 안정성 평가를 위하여 실내시험을 통한 GFRP관 재료의 역학적 성질을 규명하여, GFRP관의 해석과 설계에 필요한 역학적 성질을 제시하였다. 아울러 수치해석기법을 이용하여 전 구간 및 일부구간에 상재하중 작용 시 흄관과 GFRP관의 변형 및 부등침하 관계를 비교분석하여 수치해석을 통한 GFRP관의 적용성을 평가하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권7호
• /
• pp.885-891
• /
• 2004

To evaluate the feasibility of using sperm-mediated gene transfer (SMGT) for carrying foreign gene into chicken oocyte, a reporter gene, CX-EGFP, was used in this study. The reporter gene was first mixed with liposome or liposome-like compound and the mixtures were further combined with ejaculated cock spermatozoa. The spermatozoa treated with liposome and CX-EGFP mixture was subsequently coincubated with DNaseI to remove the extra DNA which insured the authenticity of positive signals. The treated sperms were then subjected to transgene (reporter gene) existence analysis and artificial insemination of laying hens. Obtained results indicated that the spermatozoa were able to take-in the foreign DNA; which was confirmed by polymerase chain reaction and Southern blot analysis. In the following experiment, fresh ejaculated sperms were mixed with CX-EGFP-liposome or CX-EGFP-liposome-like complex then used for artificial insemination of each of six laying hens. Eggs laid between day-3 and day-7 post insemination were collected. Newly hatched chicks, two out of 53 from CX-EGFP/liposome treated group and two out of 21 from CXEGFP/liposome-like treated group, were proven to be transgenic. This study suggests that SMGT is a powerful method for generating transgenic chickens.

• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.1-11
• /
• 2002

Flow of fluid has been studied in various fields of fluid engineering. To hydraulic engineers, the unsteady flow such as pulsation and liquid hammering in pipes has been considered as a serious trouble. So we are supposed to approach the formalized mathematical model by using more exact momentum equation for fluid transmission lines. Most of recent studies fur pipe line have been studied without considerations of variation of viscosity and temperature, which are the main factors of pressure loss causing the friction of fluid inside pipe line. Frequency response experiments are carried out with use of a rotary sinusoidal flow generator to investigate wave equation take into account viscosity and temperature. But we observed that measured value of gains are reduced as temperature increased. And it was respectively observed that the measured value of gains are reduced and line width of gain is broadened out, when temperature was high in the same condition. As we confessed, pressure loss and phase delay are closely related with the length, diameter and temperature of pipe line. In addition, they are the most important factors, when we decide the momentum energy of working fluid.

• 한국농촌건축학회논문집
• /
• 제10권3호
• /
• pp.9-18
• /
• 2008

The study was intended to suggest the design alternatives of rural village community center based on the design directions which were derived from the previous research, and to evaluate the alternatives by rural residents. The previous research was carried out to grasp the conditions and user's needs of rural village community center. The subjects were 100 residents who lived in rural area in Chonlabukdo. The interview was carried out using a questionnaire with model and isometrics of two alternatives, which showed floor plan and building shape. The subjects evaluated positively both of two alternatives, but slightly more preferred alternative | because of a spacious diningroom and an indoor toilet. The size of a livingroom and entrance, indoor toilet space/location, storage space and deck were significant elements in two alternatives according to t-test. They responded that both of indoor and outdoor toilet should be planned in rural village center. Also, each toilet and room for man and woman should be separated. Entrance space should be enough to take on/off their shoes in a sitting position and deck space was planned to intermediate between indoor and outdoor space.

• 공학교육연구
• /
• 제15권6호
• /
• pp.80-85
• /
• 2012

This study investigates significant factors regarding college freshman engineering students and analyses each factors influence on student satisfaction in the College of Engineering core curriculum. We carried out a survey targeting 505 students who completed their fundamental education for major course learning in the 2011 academic year while attending one college in Gwangju and ruled out inadequate respondents. A total sample size 437 students were analyzed. The seven independent variables are academic fees, academic term period, academic environment of the classroom, learning material content, time of lecture, student sincerity and student need for the program. The dependent variable is fundamental education satisfaction level. As a result of multiple regression analysis, the following factors were found to be significant in the following order: learning material content, time of lecture, student sincerity, student need for the program, academic fees and academic environment of the classroom. On the other side academic term period was not significant. For improving fundamental education satisfaction, there is a need for prudent consideration regarding learning material development and lecture times. Also further investigation should take place for policies necessary for increasing learner motivation and sincerity, and expand appropriate conditions for learners to become self-aware of the education they need within their major.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.154-160
• /
• 2001

For major structural components periodic inspections and integrity assessments are needed for the safety. However, many flaws are undetectable because sampling inspection is carried out during in-service inspection. Probabilistic integrity assessment is applied to take into consideration of uncertainty and variance of input parameters arise due to material properties and undetectable cracks. This paper describes a Probabilistic Fracture Mechanics(PFM) analysis based on the Monte Carlo(MC) algorithms. Taking a number of sampling data of probabilistic variables such as fracture toughness value, crack depth and aspect ratio of an initial surface crack, a MC simulation of failure judgement of samples is performed. for the verification of this analysis, a comparison study of the PFM analysis using a commercial code, mathematical method is carried out and a good agreement was observed between those results.

• 한국화재소방학회논문지
• /
• 제22권5호
• /
• pp.125-136
• /
• 2008

공직사회의 부패는 사회전반의 부정부패를 가져올 수 있으며, 시민사회의 직접적인 대민 관계에 있어 행정에 대한 불신을 초래하여 점증적으로 사회적 비용의 증가를 가져올 수 있다. 일선 소방공무원들의 현장 경험을 토대로 한 청렴도 향상을 소방행정의 최우선 과제로 삼아 전체 소방공무원의 관심을 유도하고, 특히 점차 은밀하고 지능화 되고 있는 구조적 고질적 부패문제를 근원적으로 해결하기 위해서는 불합리한 제도와 시스템을 찾아 이를 개선해 나가는 노력이 무엇보다 중요하다. 본 연구의 목적은 소방공무원의 부패요인과 부패실태를 조직적, 행태적, 환경적 측면으로 분석하고 문제점을 도출하여 이를 바탕으로 소방공무원의 청렴도 향상 방안을 제시하고자 함.

• 한국가정과교육학회지
• /
• 제15권4호
• /
• pp.23-35
• /
• 2003

The purpose of this research is to analyse the composition of theories and practical activities in clothing and textiles in Technologyㆍ Home economics textbooks in the 7th National Curriculum and find out learning requirement of students in the area. For this research, a survey was conducted using questionnaires with 280 high school students living in Daegu and the rate of response was 78.9%. The results of this study are as follows. 1. After analysing the curriculum of Practical Arts subject in elementary school and Technology´ Home Economics subject in secondary school, we could find out that more emphasis is put on practical activities in elementary school and high school. On the other hand, theories are considered more important in middle school. 2. Students have similar preference both for theories and for practical activities as a way of learning in class and show positive responses to practical activities unless they´re giving too much pressure as a part of performance test. 3. According to their learning requirement. several teaching-learning contents in clothing and textiles in Technology Home economics are selected such as materials,. clothes designs, how to set dressed well, how to make a reasonable purchase on clothes, and the process of manufacturing various clothes, etc. Therefore it would be desirable to provide the students with the learning opportunity to the extent where even the students who haven´t chosen the selected-advanced course can take part in class actively.

• 화약ㆍ발파
• /
• 제17권4호
• /
• pp.32-50
• /
• 1999

This study deals with interface charactristics of tube and tubesheet of the nuclear steam generator by the explosive expansion in order to take advantage of optimum expansion ratio, pull-out strength and leakage tightness and improvement of the resisitance on the stress corrosion cracking for low residual stress. The paper also show the relationship between roll, hydraulic and explosive expansion. The results obtain are as follows (1) Because of the explosive bonding is to use the high speed pressure and energy by the explosive, workability is good, bonding region is homogenous (2) Expansion ratio is 2.7%, Pull-out strength 850kg, Leakage strength $500kg/cm^2$. Clearance gap is 10~30mm in case of explosive expansion and interface structure of the tube and tubesheet is optimum condition. (3) As the transition region of the explosive expansion is inactive, the resistance of the stress corrosion cracking is increases 30~40% compare to the roll and hydraulic expansion.

• 한국식생활문화학회지
• /
• 제30권4호
• /
• pp.447-456
• /
• 2015

The purposes of this study were to determine health consciousness and eating habits of dining business owners from Seongnam city. To figure out their health levels, this study focused on quality of sleep, current state of health, health care, smoking, drinking, regular exercise, working hours, dietary behavior pattern, dietary habits, and food intakes patterns. Out of 200 subjects, 104 (52.0%) were males and 96 (48.0%) were females. Their average age was 46.60. For education level, a majority of males graduated from college, whereas a majority of females graduated from high school. Average combined ratios of overweight and obese were 62.5% for males and 25% for females. A majority worked less than 3 years in the dining business area, but 37% of subjects worked more than 10 years. Average health level was favorable, but 38.9% of subjects had hypertension. Males' percentages for smoking and drinking were higher than those of females. Regular physical activity was high, but regular exercise rate was low. Males' average eating speed was faster than that of females and had low scores for desirable eating habits. The study shows that local business owners need to take care of their health.