• 대한건축학회논문집:구조계
• /
• 제34권4호
• /
• pp.65-74
• /
• 2018

The primary objective of this study is to develop a conceptual design of automated pothole patching machine that improves the conventional work in safety, quality, and productivity. For this, the following research works are conducted sequentially; 1)literature review, 2)selection of element technology for conceptual design, 3)deduction of work process and conceptual design, 4)life cycle cost analysis of the conceptual design. As a result, X-Y table telescopic manipulator, pothole patching end effector, realtime pothole recognizer, 3D pothole volume profiler, automated pothole patching machine controller are selected as core technologies. Furthermore, a conceptual design and working process of an automated pothole patching machine are developed based on the core technologies. According to the life cycle cost analysis result, the cost of the automated method was 38.3% less than that of the conventional method, and the economic efficiency was also superior(ROR 77.1%, Break-even Point 23.8month). It is expected that the application range and impact on the construction industry will be enormous due to the increasing trend of road maintenance market.

• 한국농공학회지
• /
• 제17권3호
• /
• pp.3860-3871
• /
• 1975

This experiment was carried out to establish the mechanized methods in stumping and root-clearing, which were the most important works in the reclamation of sloping uplands. The determination of optimum teeth interval of rake blades and its operation methods to reduce the quantity of transported topsoil during the works, are the aims of this investigation. A newly designed rake blade, whose net teeth intervals could be regulated by three stages as 15cm, 25cm, and 35cm, was manufactured to attach to the bulldozer of 13ton. The experiments were carried out at Kilsang-Myon, Kwangwha-Gun, from Aug. 9 to Aug. 23, 1975. For each interval, 36 test plots of 50${\times}$10mn in size, which were regulated under three levels of land slopes of 10, 20, and 30% and two different tree stand density of high or medium values, were randomly chosen and arranged by two-replicated split-split plot design. Each stump classified by its diameter was stumped and cleared by the rake dozer to be related between diameter and stumping time. The results obtained in this experiment can be summarized as follows: 1. Stumping times for the diameters ranging from 6 to 18cm of stumps are almost the same and they are not varied by the difference of teeth intervals of rake dozer. 2. By back-ward stumping method, the number of stumps which can be stumped per hour ranges almost from 100 to 170, showing significant difference with respect to the teeth intervals. The working area is sharply varied with not only the stand density of stumps but the teeth intervals. 3. Optimum stumping distance for each teeth interval of rake dozer to minimize the quantity of transported topsoil are varied with such the rates as it is 15m or 20m for 15cm of teeth interval, but 25m for 25cm or 35cm, respectively. The clearing distance could be chosen almost double as long as the operating distance. 4. The working areas per hour of the simultaneous stumping and clearing methods are no significant difference among the various treatments of working conditions, but they are affected by the operating techniques. However, the influencing factors of the working conditions as classified before and the working directions are ranged from 10 to 15 per cent of total working area, respectively. 5. The residual rates of stumps which are not stumped by the rake dozer in each test plot are generally reduced as the teeth interval gets narrower, but there are no significant difference among them. The mean residual rates average to be about 4% for the simultaneous stumping and clearing method. The back-ward stumping method are recommended to be supervised and directed by more than one man, to show the operator where the stumps are located. 6. The results according to the stumping and clearing methods are summarized as Table IV-2. And the selection of working methods is recommended to follow as shown in Fig. IV-9 with respect to the stand density of the field. 7. Generally speaking, the narrower the teeth interval, the better become the working results, but the more the quantity of transported topsoil is increased. Therefore, it is recommended that the teeth interval should be reduced from the present distance of more than 30cm to 25cm or 15cm, by developing suitable working methods through more field works and experiments.

• 방송공학회논문지
• /
• 제17권5호
• /
• pp.851-863
• /
• 2012

Retinex 기법은 영상의 어두운 영역의 가시성 향상을 통해 영상의 명암대비를 향상시킨다. 그러나 기존 Retinex 방식들은 RGB 색공간에서 수행되기 때문에 색상의 왜곡과 과다한 채도향상으로 인한 색신호 재현의 오류가 발생한다. 본 논문에서는 YCbCr 색공간에서 휘도신호에 대한 Retinex 처리를 통해 명암을 향상시키고, 휘도신호와 색상에 따른 최대 색차신호 테이블을 이용하여 휘도신호의 밝기 변화에 따라 변화된 채도를 밝기에 적응적으로 보정하는 방법을 제안한다. 제안된 방법은 과채도 현상을 막기 위해 휘도와 색상에 따른 채도의 상관관계를 고려하여 색차신호가 올바른 색역에 사상될 수 있도록 한다. 실험을 통해 제안된 방식은 기존 방식에 비해 다양한 특성을 갖는 영상에서 우수한 컬러 향상이 이루어짐을 확인하였다.

• 한국응급구조학회지
• /
• 제15권1호
• /
• pp.5-23
• /
• 2011

Objective : This study grasps specific task on paramedics who plays a great role in the emergency scene, thereby eliciting definition of job called paramedics and analyzing occupation by DACUM method. Thus, the aim is to suggest working-level guidelines on the task of paramedics. Methods : It targeted paramedics who are working at hospitals, fire stations, and industries in Seoul and Gyeonggi area from Oct. 11, 2010 to Nov. 30. A total of 608 copies of questionnaire were analyzed by DACUM method. A research tool on occupational analysis consisted of 8 pieces for duty, 43 pieces for task, and 149 pieces for task elements. In order to survey performance frequency, importance, and difficulty by element, each task was developed by this research team, and each task was analyzed and finally elicited through workshop of DACUM method. Results : The occupational definition of paramedics, which was defined through this DACUM, was elicited as 'professional job of performing emergency medical care on the scene, during transferring, or within medical institution in order to maintain life and prevent wound deterioration, targeting a person who is put in emergency situation.' Task element, whose performance frequency was indicated to be the highest, was in order of checking mental status($2.76{\pm}0.497$), checking vital signs($2.70{\pm}0.578$), and airway/c-spine immobilization($2.69{\pm}.546$). Especially, defibrillation stood at $2.23{\pm}.655$ points. Task element, whose performance frequency was low, was in order of caring sexual abuse victims($1.32{\pm}0.563$), performing cricothyrotomy($1.36{\pm}0.618$), and caring cardiac arrest victims($1.40{\pm}0.636$). Importance of task was in order of airway/c-spine immobilization ($2.88{\pm}0.338$), maintenance of respiration($2.88{\pm}0.351$), caring cardiac arrest victims($2.87{\pm}0.349$), and performing CPR($2.87{\pm}0.361$). Task element, whose importance is low, was indicated to be in order of enema($2.29{\pm}0.736$), urinary catheterization($2.35{\pm}0.664$), and nasogastric intubation($2.35{\pm}0.667$). Task element, whose difficulty was shown to be the highest, was indicated to be in order of caring cardiac arrest victims during pregnancy ($2.60{\pm}0.559$), caring cardiovascular injury($2.59{\pm}0.546$), and labor management($2.53{\pm}0.533$). Conclusion : Based on the results of this study, the job performance work table(Dacom chart) of paramedics is suggested to be used, thereby being applied to development in education and curriculum of paramedics. It is necessary to evaluate usefulness of the job performance work table by estimating effect of education for paramedics based on the job performance work table of paramedics.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.177-183
• /
• 2015

Incremental sheet metal forming is a manufacturing process to produce thin parts using sheet metals by a series of small incremental deformation. The process rarely needs dedicated dies and molds, thus, preparation time for the process is relatively short as to be compared to conventional metal forming. Spring back in sheet metal working is very common, which causes critical errors in dimensions. Incremental sheet metal forming is not fully investigated yet. Hence, incremental sheet metal forming frequently produces inaccurate parts. This paper proposes a method to minimize dimensional errors to improve shape accuracy of products manufactured by incremental forming. This study conducts experiments using an exclusive incremental forming machine and the material for these experiments are sheets of aluminum AL1015. This research defines a process parameter and selects a few factors for the experiments. The parameters employed in this paper are tool feed rate, tool diameter, step depth, material thickness, forming method, dies applied, and tool path method. In addition, their levels for each factor are determined. The plan of the experiments is designed using orthogonal array $L_8$ ($2^7$) which requires minimum number of experiments. Based on the measurements, dimensional errors are collected both on the tool contacted surfaces and on the non-contacted surfaces. The distances between the formed surfaces and the CAD models are scanned and recorded using a commercial software product. These collected data are statistically analyzed and ANOVAs (analysis of variances) are drawn up. From the ANOVAs, this paper concludes that the process parameters of tool diameter, forming depth, and forming method are the significant factors to reduce the errors on the tool contacted surface. On the other hand, the experimental factors of forming method and dies applied are the significant factors on the non-contacted surface. However, the negative forming method always produces better accuracy than the positive forming method.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.289-297
• /
• 1997

Work-related low back pain(below LBP) is one of the major cause of morbidity, disability, limitation of activity and economic loss. Therefore the work-related LBP is one of the major issue in the field of industrial safety and health. This study was performed for detecting the risk factors and proposing the effective control programs of work-related LBP. The subjects were male workers employed at the welding and metal factory. The data was collected by self-reported questionnaire, interview and checking abdomen muscular and grasping power for two days on October, 1993. The contents of questionnaire were as follow: the experience of LBP, general characteristics, physical characteristics, employment status, type of work and working environment. The number of cases was 104 with a history of work-related LBP, so the prevalence of work-related LBP was 35.0%, and the number of controls was 140 without any history of LBP. As a result, marital status, educational level, abdomen muscular power, tenure, category of job, satisfaction of job, working posture, satisfaction for table and chair and lifting materials showed a statistical significance between the case and control groups. 284 Lifting jobs were quantified by NIOSH lifting equation method and ergonomic computer modelling methods. There were no significant differences in the action limit and disc compression force between group with LBP and without LBP. But in the lifting frequency and cumulative disc compression force there were significant differences. Therefore work-related LBP should be prevented by the ergonomic and environmental control.

• 대한안전경영과학회지
• /
• 제9권6호
• /
• pp.19-29
• /
• 2007

According to industrial disaster statistics by the Ministry of Labor in 2006, out of 11,688,797 people working at 1,292,696 business places that apply Industrial Disaster Indemnity Act, 89,910 workers were involved in an accident that more than 4 days of medical treatment requires. Among this figure 2,453 people lost their precious lives. "89,910 industrial disaster victims per annum" is showing the safety level of our industrial situation. To prevent such industrial disaster, the most typical and distinctive method is Accident-free Campaign. At the beginning, the movement arose with devotion through out the entire industry. But, the heartbreaking fact is that the fever is getting cool gown as times goes by. Therefore, opportunity for revitalization of this movement is required. The movement should be practically supporting principle of respect for human life and dignity. And it should be established with analysis on industrial disaster and systematize Accident-free Campaign totally in connected research.

• 한국기계가공학회지
• /
• 제20권6호
• /
• pp.10-16
• /
• 2021

Drilling is a crucial process that takes up a significant amount of weight during machining operations. In addition, drill tip-type tools and related operations have been developed for manufacturing industries to achieve economic efficiency. In this study, SM45C carbon steel, widely used for machine structures, was utilized as the working material after quenching and tempering. Insert-tip types of carbide tools, such as TiN and TiAlN, were used as tool materials. Drilling conditions such as the spindle revolution, feed rate, step of cut, and tool diameter were used to measure roughness, roundness, and straightness using the orthogonal array table statistical method. The surface roughness, roundness, and straightness characteristics based on the conditions were analyzed using ANOVA. The results showed that the spindle speed and feed rate were the main factors influencing carbide insert-tip drilling under the same conditions as the experimental conditions.

• 대한인간공학회지
• /
• 제35권6호
• /
• pp.595-609
• /
• 2016

Objective: The purpose of this study was to develop and validate the guidelines for Medic Work Table (MWT) based on the anthropometric data of medical technologists. Background: Users' anthropometric data such as sitting height, sitting elbow height, knee height, and so on are significant factors for designing comfortable and useful furniture. Thus, many guidelines for different types of desks and chairs based on the users' anthropometric data have been suggested to many researchers. However, few researches have been conducted to provide design guidelines for MWT for blood collecting task. Medical technologists often use their upper extremities to perform blood collecting task with high repetitions. These repeated motions could be a critical factor in the prevalence rate of Work-related Musculoskeletal Disorders (WMSDs). Therefore, a study on ergonomic design of MWT would be essential in preventing the WMSDs and improving the quality of the working environment of medical technologists. Method: This study suggested design guidelines for ergonomic MWT by focusing on the heights of the upper side and underside, depths of the inside and outside, and width of MWT through anthropometric studies and literature reviews. Afterwards, a new MWT was made using the suggested design guidelines for this study. Five healthy medical technologists participated to evaluate the original MWT and new MWT. All participants took part in the range of motion (ROM) test, electromyography (EMG) muscle activity test, and usability test to validate the suggested guidelines in this study. EMG signals of related muscles (Flexor Carpi Ulnaris, Extensor Carpi Ulnaris, Deltoid Anterior, and Biceps Branchii) were recorded through the surface electromyography system from both the original MWT and the new MWT. The ROM test of the shoulder and elbow flexion was also assessed using motion sensors. Results: The newly designed MWT showed decreased ROMs of the shoulder and elbow up to 22% and 18% compared to the original MWT. The muscle activities in the new MWT also showed a decrease of 13% in Anterior Deltoid, 6% in Biceps Brachii, 5% in Flexor Carpi Ulnaris, and 8% in Extensor Carpi Ulnaris muscle groups, compared to the original MWT. In the usability test, the satisfaction score of the new MWT was also 56.1% higher than that of the original MWT. Conclusion: This study suggested guidelines for designing MWT and validating the guidelines through qualitative and quantitative analyses. The results of motion analysis, muscle activity, and usability tests demonstrated that the newly designed MWT may lead to less physical stress, less awkward posture, and better physical user interface. Application: The recommended guidelines of the MWT would be helpful information for designing an ergonomic MWT that reduces physical loads and improves the performance of many medical technologists.

• 한국가정과학회지
• /
• 제7권1호
• /
• pp.51-67
• /
• 2004

This study analyzed the effects of nutrition technicians' hygiene education on cooking workers' performance of hygiene management in order to ensure the security of school meals. The situation of cooking workers' disposition in subject schools was elementary school(51.1%) and middle school(48.9%) and the type of meals was rural area type(54.2%), urban type(36.5%). and island and isolated area type(9.3%). The methods of meals management were single cooking(88.2%) and joint cooking and management(11.8%). The type of distributing meals was distributing in a dining room(93.5%), in a classroom(3.7%), and in both dining room and classroom(2.8%). Nutrition technicians' employment form included regular(53.5%) and daily(88.2%). Their education was junior college graduate(50.2%), university graduate(44.8%). and graduate school students(5.0%). Cooking workers' employment form included daily(88.2%) and regular (11.1%). suggesting that most were regular. Most cooking workers(77.4%) had at least high school certificate. Regarding the situation of cooking workers' disposition in subject schools, the number of student per one cooking worker was found as 91-120(37.2%), 61-90(22.6%). 60 and under(21.l %). 121-15006.7%). and 151 and over(2.5%). Cooking workers' level of performance of hygiene management was post-working stage(66.37/75 marks), pre-working stage(64.22/75 marks). and working stage(20.34/25 marks), The counting of meals articles in a pre-working stage(20.34/25 marks). temperature and required time in a working stage(18.78/25 marks), and machinery equipment and hygiene in a pre-working stage(21.40/25 marks) showed lowest of performance, which suggest poor service of hygiene. Cooking workers' performance of hygiene management by working stage showed the significant difference with school class(p<.001), type of schools with meals(p<.05). state of cooking workers' employment(p<.001), and cooking worker's disposition(p<.05). A working stage showed the significant difference with type of schools with meals(p<.05). A post-working stage showed the significant difference according to type of schools with meals(p<.05), and the methods of meals management(p<.05), and cooking workers' disposition(p<.05). In the execution of hygiene education, individual hygiene was highest(94.8%), followed by the management of machinery equipment and tools(89.7%), food poisoning and microorganism(94.7%), and the method of food treatment(76.4%). A yearly plan of hygiene education included established(83.9%) and not established(l6.1%). Regular education included not executed(25.1%), 2-3 times a month(l6.1%), and more than 4 a month(4.0%) and occasional education was not executed(57.0%), 1-3 times a month(26.3%), and more than 4 a month(l5.7%). In the methods for hygiene education, oral education(95.7%) was used most, followed by demonstration(10.5%), poster/photo(10.5%), video/slide(3.7%), and computer(3.7%). Frequency of improvement and complement of hygiene education included once a month(56.3%), once a year(20.7%), by quarter(l1.5%), and every six months(1l.5%). Newspaper was used most in materials of hygiene education, followed by internet, TV, nutrition technician's reeducation, information exchange between members, educational office's training, and reference book, and educational office's material. and symposium. Cooking workers' assessment of the effect of hygiene education was conducted through observation(56.8%), check table(l5.2%), question(l4.0%), and examination(14.0%). The reason of cooking workers' low level of performance included habitual custom(53.9%), lack of understanding(20.4%), overwork(l4.6%), and lack of knowledge(l1.l%) and the reason of difficulty in hygiene education included lack of time(55.3%), lack of understanding(27.6%), lack of knowledge and information(8.7%), and lack of budget(48.0%).