• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.46-53
• /
• 2009

To find the working condition is one of the important factors in precision machining. In this study, we analyzed maximum working temperature by infra-red camera and surface roughness in side wall end milling using design of experiment (DOE): RSM(response surface methodology), ANOM(analysis of means) and ANOVA(analysis of variance) by table of orthogonal array. ANOM and ANOVA are well adapted to select sensitivity of design variables for maximum working temperature and surface roughness. The effective design variables and their levels should be determined using ANOM, ANOVA. RSM is presented 2nd order approximation polynomial of maximum working temperature and surface roughness is composed with design variables. Therefore, it is expected that the proposed procedure using design of experiment : table of orthogonal array, ANOM, ANOVA and RSM can be easily utilized to solve the problem of working condition.

• 토지주택연구
• /
• 제3권1호
• /
• pp.79-82
• /
• 2012

While there exists a relatively large body of technical information for the engineered design of wood-frame buildings to resist seismic ground motions, the quantitative assessment of seismic resistance of conventional houses built by prescriptive requirements is less well understood. Forintek Canada Corp., in collaboration with other research and industry partners, has embarked on a research project to address this topic. This paper will report on the seismic shake table tests of a full-scale wood-frame building. The two-story specimen, $6m{\times}6m$ in plan, was built on the seismic shake table at Tongji University in Shanghai, China, according to Part 9 of the 1995 National Building Code of Canada and shaken uni-directionally in each of the two principal directions. Three different seismic table motions were applied at increasing peak ground motion amplitudes up to 0.40 and 0.50 g. The specimen was repaired after the above sets of seismic table motions, and successive runs were conducted for increased door openings. Measurements included specimen accelerations, displacements and anchorage forces. Static stiffness of the specimen was measured at low force levels, and natural frequencies were measured after each seismic loading stage by applying low-level random excitation. The results presented consist of the capacity spectra of the shake table tests, changes in specimen stiffness and natural frequencies with increasing seismic loading. These results and those from other recent shake table tests elsewhere will be compared with simplified engineering calculations based on codified values of strength, and on that basis preliminary conclusions will be drawn on the adequacy of the current code provisions and design guides in Canada and the USA for conventional wood-frame construction.

• 소음진동
• /
• 제11권2호
• /
• pp.234-240
• /
• 2001

Recently, the regulations from the government and the concerns of people be raised to the interest in exhaust and intake noise of passenger car as much as other vehicles. In these demands, performance prediction software was developed in this paper. In this study, Robust design was used for improving the noise reduction capacity of intake system with the performance prediction software. On the basis of the existing design, length and radius of each component that was thought to be effective to the performance of intake system was selected. At first, factors are arranged by using Ll8 table of orthogonal array and then optimum value can be obtained by modified Ll6 table of orthogonal array.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.7-12
• /
• 2011

In the recent field of 5-axis machine tools, it is necessary to improve machining ability. The tilting index table is a key unit in order to manufacture some non-rotational and 3-dimensional parts by using conventional machining centers. In this study, the structural analysis of a tilting index table is carried out and the displacement and distribution of stress in the tilting index table is analysed to design the table safely. The modal analysis is performed in order to confirm the frequency response about the vibration having a large effect on the machine tools. The dynamic analysis is performed in order to confirm the rigidity, and the structural stability has been verified.

• 한국소음진동공학회논문집
• /
• 제14권3호
• /
• pp.185-192
• /
• 2004

Vibration table is required to obtain high packing density in expendable pattern casting process. Packing density. which is an important manufacture factor, depends on the vibration pattern induced by vibration table. In general, circular vibration pattern is recognized as the best pattern. The existing vibration table is investigated to identify current vibration pattern and consider a countermeasure. Modal test is utilized to identify the dynamic characteristics of vibration table, and finite element method is used to propose the improved design. In simulation using finite element method, the position of stiffeners is obtained to satisfy the required dynamic characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.160-165
• /
• 2002

Vibration table is required to obtain high packing density in expendable pattern casting process. Packing density, which is an important manufacture factor, depends on the vibration pattern induced by vibration table. In general, circular vibration pattern is recognized as the best pattern. The existing vibration table is investigated to identify current vibration pattern and consider a countermeasure. Modal test is utilized to identify the dynamic characteristics of vibration table, and finite element method is used to present the improved design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.322.2-322
• /
• 2002

Vibration table is required to obtain high packing density in lost form casting process. Packing density, which is important manufacture factor, depends on the vibration pattern induced by vibration table. In general, circular vibration pattern is recognized as the best pattern. The existing vibration table is investigated to identify current vibration pattern and consider a countermeasure. Modal test is utilized to identify the dynamic characteristics of vibration table, and finite element method is used to present the improved design

• 국제초고층학회논문집
• /
• 제2권1호
• /
• pp.79-83
• /
• 2013

Shaking table test is an important and useful method to help structural engineers get better knowledge about the seismic performance of the buildings with complex structure, just like Shanghai tower. According to Chinese seismic design guidelines, buildings with a very complex and special structural system, or whose height is far beyond the limitation of interrelated codes, should be firstly studied through the experiment on seismic behavior. To investigate the structural response, the weak storey and crack pattern under earthquakes of different levels, and to help the designers improve the design scheme, the shaking table model tests of a scaled model of Shanghai tower were carried out at the State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University, Shanghai, China. This paper describes briefly the structural system, the design method and manufacture process of the scaled model, and the test results as well.

• 경영과학
• /
• 제17권3호
• /
• pp.119-129
• /
• 2000

Design of web site must include community considerations alongside technical design aspects. The main purposes of this study are to identify the community criteria for evaluating web site and to examine how business web sites include the community factors. To identify the evaluation criteria, the author reviewed recent literatures and made a table showing a summary result(see Table 1). appendix shows a sample form NASDAQ(n=82) and KOSDAQ(n=59) which were evaluated. Using the evaluation from with 189 items(Table 3), all sites were visited and review between August 28, 2000 and September 6, 2000. The auther’s evaluations were done from the perspective of community building in business sector. Table 4, summary data on the results of the study, shows that the level of application of the community concept is very low. Among the listed 18 items, only a few items are utilized at more than 50% level. Less than 10% items are Member Profile, Group Segmentation, Backstory, Forum, Chat, Fact-to-face Meeting, and Collaborative Design. the unbalanced utilization due to the lack of community concept in businesses are found. Korea firms are superior to NASDAQ firms in terms of Bulletin Board and FAQ; But Korean firms are inferior and remain at very low level in terms of Member Login, Education Materials, Backstory, Forum, and Integrating Off-line Activities which are core factors of community building.

• 한국정보처리학회논문지
• /
• 제7권1호
• /
• pp.266-272
• /
• 2000

제곱 테이블을 이용한 곱셈 방법은 처리과정을 간단히 하고 속도도 향상시킨다. 그러나, 비트 길이가 증가함에 따라 테이블 크기는 지수 승으로 증가하게 된다. 최근에 Wey와 Shieh는 고속 곱셈이 요구되는 응용분야에 적합한 폴딩 기법을 이용한 우수한 제곱 발생기를 제안하였다. 이 기법은 ROM 주소에 대한 1의 보수 값을 이용하여 제곱 값을 위한 거대한 테이블을 계속 폴딩함으로써 필요한 테이블의 크기를 작게 만들어 ROM의 크기를 줄일 수 있도록 한다. 본 논문에서는 Wey와 Shieh의 기법에서 1의 보수 부분이 필요 없는 개선된 폴딩 기법을 제안한다. 그리고 제안된 방법은 중간 과정에서 필요한 부분 합의 비트 길이를 줄임으로써 하드웨어 구현을 쉽게 하고 성능을 더욱 향상시킨다.