• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.4
• /
• pp.283-290
• /
• 1996

This experiment was carried out to determine the effects of soil condition that previous crop cultivated after [TO: Soil of corn cultivated, T1 : Soil of rye monoculture cultivated(l50kg/ha), T2 : Soil of mixedculture cultivated(Rye : Red clover = 120 : 3koa). T3 : Soil of mixed-culture cultivated(Rye : Red clover = 90 : 6kg/ ha), T4 : Soil of mixedculture cultivated(Rye : Red clover = 60 : 9kg/ha), T5 : Soil of mixedculture cultivated (Rye: Red clover = 30 : 12kg/ha), T6 : Soil of red clover monoculture cultivated(l5kgha)) on the growth characteristics and nutrient yield of silage corn. The results are summarized as follows. 1. The plant length of silage corn was high in order of T6>T5>T4 treatment. In the leaf length, T5 and T6 treatment showed short compared to the other treatments, but they were wider than the other treatments in leaf width. In the number of leaf, T6 treatment was the highest as 14 leaves per plant, while T1 treatment showed lower than the other treatments as 12.6 leaves per plant. 2. In the stem hardness, ear length, ear width and ear full degree, soil treatment of red clover mono-culture cultivation(T6) showed higher than the other treatment as 5.1 1kg/$cm^2$, 20.8~~1, 7.7cm and 97%. respectively (P<0.01, 0.05). Ihe leaf of summer depression did not many occurrence, but T6 treatment was lower than the other treatment as 0.8 leaf per plant. 3. ADF and NDF composition were not affected by soil condition. Crude protein composition of T6 treatment was the highest as 7.8%. while TI treatment was the lowest as 6.9%. Fresh weight yield(59,083kg/ha), dry matter yield(21,743kg/ha), crude protein yield(l,369kg/ha) and TDN yield(15,800kg/ha) at T6 treatment were much more increased by 41.9, 47.5, 57.4 and 49% than TI treatment(39,410, 14,259, 827 and 10,056kg/ha).

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.694-701
• /
• 2013

A new copolymer named T-TI24T (poly((5,5-(2-butyl-5,6-bisdecyloxy-4,7-di-thiophen-2-yl-isoindole-1,3-dione))- alt-(2,5-thiophene))) based on phthalimide derivative and thiophene is synthesized by the Stille-coupling reaction. The polymer shows relatively high number average molecular weight of 86500 g/mol with good solubility in common organic solvents such as chloroform, 1,2-dichlorobenzene, and toluene and is thermally stable up to $380^{\circ}C$. Besides, it possesses a relatively low highest occupied molecular orbital (HOMO) energy level of -5.33 eV, promising the high open circuit voltage ($V_{oc}$) for photovoltaic applications. Active layer solution of polymer T-TI24T-as a donor and (6)-1-(3-(methoxycarbonyl)- {5}-1-phenyl[5,6]-fullerene (PCBM)-as an acceptor in different weight ratios is applied to fabricate the polymer solar cell devices. The ratio of polymer/PCBM affects the solar cell efficiency and the best performance exhibits in the device with polymer/PCBM = 1:3 (w/w), which shows a power conversion efficiency (PCE) of 0.199% and a $V_{oc}$ of 0.99 V, respectively. Even though the device shows the very low PCE, the $V_{oc}$ is higher than that of well known bulk heterojunction type solar cell based on P3HT:PC61BM (c.a. 0.5 V).

• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.619-625
• /
• 2017

The sudy was intended to evaluate the optimal equipment selection by quantitatively assessing the SNR(signal to noise ratio) and CNR(contrast to noise ratio) on the abdominal organ. This study performed on 1.5 T and 3.0 T MRI units focusing on HASTE, HASTE(f/s) and FFE(in of phase), FFE(out of phase) without using the contrast medium(Gadolinium). The data analysis was performed by randomly selecting on 1.5 T and 3.0 T abdominal MRI images. As a results, SNR and CNR values of 3.0 T is higher than 1.5 T at liver, kidney and spleen(p<0.05). Stomach, abdominal fat and pancreas was obtained a higher value at 1.5 T(p<0.05). On conclusion, the organs of outer part in the body showed generally a high value at 3.0 T, and the organs of inner part in the body including the gas showed a high value at 3.0 T because of a large difference on magnetic susceptibility.

• Radiation Oncology Journal
• /
• v.15 no.4
• /
• pp.315-319
• /
• 1997

Purpose : To evaluate the role of curative radiotherapy and salvage surgery in Patients with T1 T2 glottic canter. Materials and Method : Between June 1989 and December 1994, 23 patients with early glottic cancer, 18 with T1N0M0 and 5 with T2N0M0, were treated with radiotherapy at Gyeongsang National University Hospital All Patients were male. Median follow-up period was 46 months, and $100\%$ were observed for at least 3 years. Results : Actuarial survival rates at 5 years were $84.3\%$ for 23 patients. The 5-year actuarial survival rates were $94.4\%$ for T1 and $53.3\%$ for 72(P=0.05) The 5-rear local control rates was $70.0\%$ for T1 and $60.0\%$ for T2 (P=0.44). Of 8 Patients with treatment failure, 6 patients $(75.0\%)$ were salvaged with surgery. After surgical salvage, the 5-year local control rates were $87.2\%$ for T1 and $80.0\%$ for T2(p=0.55). Conclusion : In early stage (Stage I and II) glottic cancer, curative radiotherapy can be a treatment of choice and surgery reserved for salvage of radiotherapy failure.

• Electronics and Telecommunications Trends
• /
• v.35 no.5
• /
• pp.43-56
• /
• 2020

The 5G system standardization body has been developing standard functions to provide ultra-high speed, ultra-high reliability, ultra-low latency, and ultra-connected services. In 3GPP Rel-16, which was recently completed, this system has begun to develop ultra-high reliability and ultra-low latency communication functions to support the vertical industry. It is expected that the trend in the adoption of mobile communication by the vertical industry will continue with the introduction of 5G. In this paper, we present the industrial Internet-of-Things (IIoT) service scenarios and requirements for the adoption of 5G systems by the vertical industry and the related standardization trend at present. In particular, we introduce the 5G time-sensitive networking standard technology, a core technology for realizing 5G-based smart factories, for IIoT services.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.6
• /
• pp.851-859
• /
• 2012

This study was conducted to investigate the effects of addition of lotus (Nelumbo nucifera) leaf and root extracts on the quality and sensory characteristics of ground pork meat. Four types of ground pork were evaluated: 5% ice water added (T0), 5% lotus leaf extract added (T1), 2.5% lotus leaf extract and 2.5% root extract added (T2), and 5% lotus root extract added (T3). There were no significant differences in moisture, protein, fat, ash, cooking yield, moisture retention, water holding capacity, reduction in diameter, a-value (redness), b-value (yellowness), VBN content (volatile basic nitrogen), hardness, springiness, cohesiveness or chewiness. The fat retention was highest in T0 (p<0.05). The L-values (lightness) of T2 and T3 were higher than those of T0 and T1 (p<0.05). The pH was lowest in T1 (p<0.05). The TBARS (2-thiobarbituric acid reactive substances) values of T0, T1, T2, and T3 were 0.47, 0.17, 0.21, and 0.32 mgMA/kg, respectively, with that of T1 being significantly lower than those of the other samples (p<0.05). The contents of free amino acids related to sweet taste was 642.5 ppm for T1, which was highest among the samples (p<0.05). The flavor was highest in T1 (p<0.05). These results suggest that lotus leaf extracts improved the lipid oxidation and flavor of ground pork meat.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.498-500
• /
• 2000

T5용 형광등은 효율이 좋은 새로운 형광등으로 향후 다양한 응용이 수행될 것이나 아직 설계에 대한 기준이 명확하지 않다. 따라서 이 T5 안정기의 설계를 위해 필요한 성능상의 요건과 함께 기존의 안정기와 차이점이 있는 설계상의 문제에 대해 고찰하였다.

• Journal of Yeungnam Medical Science
• /
• v.24 no.2
• /
• pp.162-169
• /
• 2007

Purpose : It is well known that suspension microlaryngeal surgery produces marked increases in arterial blood pressure and heart rate. In this study, we evaluated the effects of 10% lidocaine preoperatively sprayed for attenuation of the perioperative hemodynamic response during suspension microlaryngeal surgery. Materials and Methods : Fifty American Society of Anesthesiologists (ASA) class 1 patients scheduled for excision of a vocal polyp by suspension laryngoscopy were randomly divided into two groups (n=25 for each group). They were intubated without 10% lidocaine spray (control group) or given 1.5 mg/kg of 10% lidocaine sprayed onto the pharyngolaryngeal and intratracheal sites 90 sec prior to intubation (10% lidocaine group). Anesthesia was maintained using desflurane in $O_2/N_2O$ 50%. The arterial blood pressure and heart rate were measured at preinduction (T0), 1 min (T1), 3 min (T2), 5 min (T3) after tracheal intubation, and 1 min (T4), 3 min (T5), 5 min (T6) and 10 min (T7) after the suspension laryngoscopy. Results : In the 10% lidocaine group, the arterial blood pressure and heart rate at 1 (T1), 3 (T2) min after tracheal intubation and 1 (T4), and 3 (T5) min after suspension laryngoscopy were lower than the same measurements in the control group. Conclusion : 10% lidocaine sprayed onto the pharyngolaryngeal and intratracheal sites before intubation was an effective method for attenuation of the perioperative hemodynamic response during suspension microlaryngeal surgery.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.46-52
• /
• 2001

In this paper, the real-time prediction of high temperature creep life was carried out for the friction welded joints of dissimilar heat resisting steels (SUH3-SUH35). various life prediction method such as LMP (Larson_miller Parameter) and ISM (initial strain method) were applied. The creep behaviors of those steels and the welds under static load were examined by ISM combined with LMP at 500, 600 and $700^{\circ}C$, and the relationship between these two methods was investigated. A real-time creep lie (tr, hr) prediction equation by initial strain (${\varepsilon}_0$, %) under any creep stress ($\sigma$, MPa) at any high temperature (T, K) was developed as follows: $t_r={\alpha}{\varepsilon}_0^{\beta}{\sigma}^{-1}$ where, ${\phi}=16: {\alpha}=10^{51.412-0.104T+5.375{\times}10^5T^2}$, $ {\beta}=-83.989+0.180T-9.957{\times}10^{-5}T^2,{\phi}=20:$ ${\alpha}=10^{69.910-0.146T+7.744{\times}10^{-5}T^2$, ${\beta}=-51.442+0.105T-5.595{\times}10^{-5}T^2$ for SUH3-SUH35 friction weld of =16mm and 20mm, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.5
• /
• pp.295-303
• /
• 2012

Removal of total nitrogen (T-N) and total phosphorus (T-P) was evaluated in a DEPHANOX process by adding Al(III) to the separator to maintain T-P in the final effluent below 0.2 mg/L. pH in each reactor was maintained 7~8 after addition of Al(III) to the levels of 5, 10, 15 mg/L. The removal efficiency of COD and T-N decreased at higher Al(III) dose, but T-P removal efficiency increased from 76.28 to 84.02, 94.66% at Al(III) dose of 5, 10, 15 mg/L, respectively. T-P in effluent showed 0.17 mg/L at Al(III) dose of 15 mg/L. Minimum 15 mg/L of Al(III) was required to maitain T-P below 0.2 mg/L in the final effluent.