• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.749-761
• /
• 2010

The switching frequency of a power device is a very important parameter in the design of a parallel active power filter (PAPF), but so far, very little discussion has been conducted on it in a quantitative manner in previous publications. In this paper, an extensive analysis on the effects of the switching frequency on the performance of a PAPF is made, and a specification of the switching frequency values with different compensation results is presented. A first-order inertia element and a second-order oscillation element are considered as approximate models of a PAPF, respectively. The compensation characteristic for each order of harmonic current is obtained at different switching frequencies. Then, the THDs of each model for the system loads of a rectifier with resistance and inductance loads are proposed. The compensation results of a PAPF controlled as a first-order inertia element are better than those of a PAPF controlled as a second-order oscillation element. With two types of system loads which are rectifier with resistance and inductance loads and rectifier with resistance, inductance and capacitance loads, the THDs of the source current after compensation are presented with different switching frequencies. The compensation characteristics for the most widely used digital control system are investigated. The situation with an analog control is the theoretical characteristic and it is the best situation. The compensation characteristic of the digital control is worse than the compensation characteristic of the theoretical characteristic. Based on these analyses, the specifications of compensation characteristics with different switching frequencies are quite straightforward. Finally, a practical design example is studied to verify the application.

• 드라이브 ㆍ 컨트롤
• /
• 제20권1호
• /
• pp.16-26
• /
• 2023

Although the upland field area of Korea is high as 44.8%, the platform optimized for the upland field is insufficient. It is necessary to develop an optimized platform for the upland field because the upland field environment is an irregular environment with many slopes. In addition, due to the characteristic of agricultural operations, the traction power and torque of the platform have to be sufficient. Therefore, in this study, a simulation model that can predict the traction power and driving torque of a crawler-type platform for the upland field was developed and validated using the specifications of the crawler platform. The simulation model was developed using Amesim (19.1, Siemens, Germany). The development of the model was conducted using the specifications of the platform. A measurement system was developed to validate the simulation model. The traction power data of the simulation model was validated with the traction force and vehicle speed. The driving torque data of the simulation model was validated with the torque of the sprocket on the crawler system. As a result of the analysis, the error between measurement and simulation results occurred within 10%, and it was determined that the traction power and driving torque prediction of the crawler platform using this model was possible.

• 한국지진공학회논문집
• /
• 제10권5호
• /
• pp.85-97
• /
• 2006

성능보장설계는 교각이 완전한 소성회전성능을 발휘할 때까지 다른 구조요소들과 교각 자체가 취성파괴 되지 않도록 설계하여 교량 전체 시스템의 연성파괴를 보장하기 위한 것으로서, 현행 도로교설계기준에는 명시적으로 규정되어 있지 않으나 대부분의 외국 교량내진설계기준에 채택되어 있다. 성능보장설계에서는 철근콘크리트 교각의 휨 초과강도를 구하고 이를 변환한 전단력을 교각, 기초, 말뚝에 작용하는 횡하중 설계전단력으로 결정하여 교각의 전단설계, 기초설계, 말뚝설계를 수행하도록 규정한다. 이 때 교각의 최대 소성모멘트를 결정하는 방법은 설계기준별로 각기 다른데, 이는 각 국의 재료 시공환경이 다르기 때문이다. 본 연구에서는 국내에서 사용하는 철근의 인장강도 측정치 3,407개와 콘크리트 압축강도 측정치 5,405개의 분석을 통하여 재료 초과강도계수를 제안하였고, 이를 적용하여 휨 초과강도를 결정하는 방법을 제시하였으며, 1,500개의 교각단면에 대한 모멘트-곡률 해석을 수행한 후 통계분석을 통하여 우리나라 실정에 적합한 초과강도계수를 제안하였다.

• 한국지진공학회논문집
• /
• 제15권2호
• /
• pp.35-42
• /
• 2011

현재까지 축적된 많은 연구결과와 설계기준을 바탕으로 일반적인 중실단면을 갖는 철근콘크리트 교각의 경우 큰 어려움 없이 내진설계가 수행되고 있지만, 중공원형 철근 콘크리트 교각의 경우 실험 및 해석상의 어려움으로 인하여 국내 외적으로 심부구속철근 상세에 대한 명확한 설계기준과 함께 이에 대한 합리적인 구속 모델 및 내진 성능평가 방안 등은 아직까지 미비한 실정이다. 본 연구에서는 주요 설계변수에 따른 중공원형 철근콘크리트 교각의 내진거동 특성을 파악하고, 이를 신뢰성 있는 비선형 유한요소해석 프로그램(RCAHEST)을 통한 결과와의 비교 분석을 바탕으로 보다 경제적이고 합리적인 설계방안 마련을 위한 기초자료를 제시하고자 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.255-260
• /
• 2011

The train control system is a facility to ensure safe train operation, and its safety is the most important factor for system introduction. Therefore, in order to improve practical usability in the business, safety analysis and evaluation of train control system and train control related core technologies are needed. Korea Railroad Research Institute has carried out standard development of radio-based train control system as a government research and development project. In this paper, we present a system specification of ATP, a core part of train control system, for standard system of Korean radio-based train control system(KRTCS). The paper present a operation environment and primary ATP functions, and functional requirement specifications.

• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.10-20
• /
• 1994

This paper presents a CATV SMS (Status Monitoring System) using HDLC (High Level Data Link Contorl) protocol and the system implementation.The system specifications were derived from the analysis of technical status and requirement of the domestic CATV industry. For the interoperability with a global network management system in the future, HDLC protocol was adopted in the system. The system performance was improved by using the communication controller chip and the large data buffer. For reducting the communication problems induced by accumulated noise in up-stream data channels, the system was designed that the different communication channel can be assigned to each proper mass of terminal. The operating software was designed with menu driven user interface and have various functions for the convenience of users. The test result of the implemented system at the experimental network showed good performance and suitability for a coaxial CATV Status Monitoring System.

• 산업공학
• /
• 제20권4호
• /
• pp.547-559
• /
• 2007

In this paper, we design Real-Time Postal Logistics Operational Model and System as a to-be system. Current postal logistics information system, named PostNet, is a basic infra system designed for an end-to-end IT-driven process, from mail acceptance to delivery, linked with internal and external systems. Recent competing circumstances drive demand for more intelligent information system. So we design real-time postal logistics operational system focused on site operations. we analyze postal logistics operation and interview field workers and establish real-time postal logistics operational model to solve operational issues. Finally we suggest system specifications.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1998년도 춘계학술대회논문집
• /
• pp.13.1-18
• /
• 1998

IVNS(In-Vehicle Navigation System) which developed by the advance of technological system including computer, display and communication will procide the important interface functions between the driver and the ITS (Intelligent Transport System). However, hat the human factors engineer can actually offer to the designer is by no means a complete set of design specifications. Therefore, a set of boundary conditions and operational ranges within which the designer can be assured that physical, perceptual and cognitive abilities and limitations of drivers will be accommodated system atically[6]. Also, this will be the considerations to compose the IVNS HMI (Human-Machine Interface) design guidelines and IVNS HMI evaluation system. As the first phase of developing the IVNS HMI evaluation system, this paper describe the architecture and the content of this system.

• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.824-836
• /
• 2008

Relaxed static stability(RSS) concept has been applied to improve aerodynamic performance of modern version supersonic jet fighter aircraft. Therefore, flight control systems are necessary to stabilize an unstable aircraft, and provides adequate handling qualities and achieve performance enhancements. Standard FCSDVP (Flight Control System Design and Verification Process) is provided to reduce development period of the flight control system. In addition, if this process is employed in developing flight control system, it reduces the trial and error for development and verification of flight control system. This paper addresses the flight control system design and verification process for the RSS aircraft utilizing design goal based on military specifications, linear and nonlinear system design and verification based on universal software, handling quality test based on HILS(Hardware In-the-Loop Simulator) environment, and ground and flight test results to verify aircraft dynamic flight responses.

• 드라이브 ㆍ 컨트롤
• /
• 제13권1호
• /
• pp.10-17
• /
• 2016

e-4WD(Electric-4WD) system is a 4WD(4-Wheel Drive) System that can transform a car into a Hybrid System. e-4WD consists of a Motor, Inverter, Speed reducer and Clutch. The Motor, Speed reducer and Clutch are installed on the rear sub-frame as a chassis module type. The inverter is installed separately. Compared to a mechanical 4WD, the e-4WD system has many advantages. For example, the reduced number of drivetrain components makes better use of the space. Driving with a motor only at low speed improves fuel economy and reduces exhaust gas. Engine downsizing is available because the motor assists the engine. The performance of a conventional HEV(Hybrid Electric Vehicle) system can also be maintained. This paper proposes the specifications of components and the control logic for an e-4WD System. And the effect of the e-4WD system is proven using a test vehicle equipped with components under various test conditions.