• Journal of Digital Convergence
• /
• 제14권1호
• /
• pp.75-82
• /
• 2016

The most of public services that we use these days is distributed and supplied as 'App' service because of wide spread of smat phones. Especially, since the interest of general citizens about usabilitu of public data has been increased, in case of Seoul, people can reach the data through 'Seoul Open Data Plaza' of 25 regions of Seoul. It becomes possible to construct various throughout this system. Ultimately, in case of users, they are provided many services through their electronic media. Looking at the development and research of public data service, they are mostly focusing on service or building up the service, but the research on visualization of contents is insufficient. This study is suggesting the specific plan and directionality of building public service using the public data which studied in the advanced research, "The user interface platform". Finally. this research is for a right usage of public data in the smart urban environment in near future and providing the practical public service.

• Journal of Korean Society of Environmental Engineers
• /
• 제35권8호
• /
• pp.586-591
• /
• 2013

This experiment was performed to enhance $CH_4$ purity of landfill gas by applying gas separator membrane for purified nitrogen gas production. 1:6 area ratios of $1^{st}$ to $2^{nd}$ membrane module was suitable for $CH_4$ recovery. After separation membrane system was installed, 249 tries were performed. Average permeability for $CH_4$ was 28.4% and for $CO_2$ was 94.3%. This can explain nitrogen gas separator membrane can be applied to collect $CH_4$ from LFG. However, nitrogen permeability only reached up to 16.5%. Therefore, the final purified landfill gas concentration was rounded up to 69.7% for $CH_4$, 4.3% for $CO_2$ and 26.0% for $N_2$. For the high degree of $CH_4$ purity, $N_2$ should be kept at least under 2.0% by controlling air inflow to landfill.

• Journal of the Korean Society of Safety
• /
• 제33권4호
• /
• pp.1-7
• /
• 2018

This paper is analyzed for the thermal characteristics(1 year) of the 6 components(DC breaker, DC filter(including capacitor and discharge resistance), IGBT(Insulated gate bipolar mode transistor), AC filter, AC breaker, etc.) of a photovoltaic power generation-based PCS(Power conditioning system) below 20 kW. Among the modules, the discharge resistance included in the DC filter indicated the highest heat at $125^{\circ}C$, and such heat resulting from the discharge resistance had an influence on the IGBT installed on the rear side the board. Therefore, risk priority through risk priority number(RPN) of FMEA(Failure modes and effects analysis) sheet is conducted for classification into top 10 %. According to thermal characteristics and FMEA, it is necessary to pay attention to not only the in-house defects found in the IGBT, but also the conductive heat caused by the discharge resistance. Since it is possible that animal, dust and others can be accumulated within the PCS, it is possible that the heat resulting from the discharge resistance may cause fire. Accordingly, there are two options that can be used: installing a heat sink while designing the discharge resistance, and designing the discharge resistance in a structure capable of avoiding heat conduction through setting a separation distance between discharge resistance and IGBT. This data can be used as the data for conducting a comparative analysis of abnormal signals in the process of developing a safety device for solar electricity-based photovoltaic power generation systems, as the data for examining the fire accidents caused by each module, and as the field data for setting component management priorities.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.413-416
• /
• 2017

The development of the internet, which is due to the advent of the fourth industrial revolution, has been slowly affecting our lives. Based on this trend, various products have recently emerged, and have yet to be developed in the context of identifying the dangers of infant babies. Increasingly, children are experiencing problems with detecting and responding to children's lives because of their daily living noise and housekeeping activities. This project attempts to develop a raspberry pie and an audiovisual sensor module to avoid the risk of preventing unwanted behavior from tripping the child's sudden behavior in everyday life. Further, it was designed to provide convenience to the guardian's convenience by implementing the smartphone app with the Wifi signal.

• Journal of The Korean Association of Information Education
• /
• 제14권3호
• /
• pp.437-447
• /
• 2010

The purpose of this thesis was to design and develop an effective e-PBL(Problem-Based Learning) for cultivating consciousness of information and communication ethics. The proposed e-PBL is based on PBL which is one of the constructivism teaching-learning theories. Online learning and face-to-face classes were systematically combined for achieving the teaching-learning goals. And the main module for online learning run on Moodle, an open source learning management system. To examine educational effectiveness of the proposed e-PBL, an experimental study was conducted through the education content and method to the subject of two class in the second-grade of university located in OO city. For experiment 60 students(treatment group=30, control group=30) are participated. And they were randomly assigned to one of ten subgroups, comprising of six students, respectively. The results of this study showed that the education using proposed e-PBL is more effective in cultivating consciousness of information and communication ethics and learners responded positively than the education using traditional face-to-face PBL learning method.

• Nuclear Engineering and Technology
• /
• 제43권2호
• /
• pp.149-158
• /
• 2011

Metal waste generated from the pyroprocessing of 10 MtU of spent fuel was classified by comparing the specific activity of a relevant radionuclide with the limit value of the specific activity specified in the Korean acceptance criteria for a lowand intermediate-level waste repository. A Korean Optimized Fuel Assembly design with a 17${\times}$17 array, an initial enrichment of 4.5 weight-percent, discharge burn-up of 55 GWD/MtU, and a 10-year cooling time was considered. Initially, the mass and volume of each structural component of the assembly were calculated in detail, and a source term analysis was subsequently performed using ORIGEN-S for these components. An activation cross-section library generated by the KENO-VI/ORIGEN-S module was utilized for top-end and bottom-end pieces. As a result, an Inconel grid plate, a SUS plenum spring, a SUS guide tube subpart, SUS top-end and bottom-end pieces, and an Inconel top-end leaf spring were determined to be unacceptable for the Gyeongju low- and intermediate-level waste repository, as these waste products exceeded the acceptance criteria. In contrast, a Zircaloy grid plate and guide tube can be placed in the Gyeongju repository. Non-contaminated Zircaloy cladding occupying 76% of the metal waste was found to have a lower level of specific activity than the limit value. However, Zircaloy cladding contaminated by fission products and actinides during the decladding process of pyroprocessing was revealed to have 52 and 2 times higher specific activity levels than the limit values for alpha and $^{90}Sr$, respectively. Finally, it was found that 88.7% of the metal waste from the 17${\times}$17 Korean Optimized Fuel Assembly design should be disposed of in a deep geological repository. Therefore, it can be summarized that separation technology with a higher decontamination factor for transuranics and strontium should be developed for the efficient management of metal waste resulting from pyroprocessing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.321-321
• /
• 2016

도시화와 토지이용 변화로 인하여 도시지역의 불투수면적이 증가하고 있으며, 이로 인해 발생하는 홍수, 가뭄, 수질악화 등의 해결은 수자원 계획 및 관리에 있어서 중요한 과제이다. 저영향개발(LID, Low Impact Development) 기법은 물 순환 체계를 복원할 수 있는 대안으로 도시지역에서 물 관리를 통해 하천 복원 및 수자원 관리를 가능하게 해주는 기술로써, EPA SWMM의 업그레이드 버전에서는 저영향개발 기술과 관련된 시설의 설계를 통한 유출 모의가 가능해졌다. 그러나 SWMM 모형 내에서 저영향개발 시설을 설계 및 계획하기 위해서는 저영향시설과 관련된 다양한 매개변수들을 입력해야하며, 효과적인 시설의 설계를 위해서는 반복적인 모의 수행이 동반된다. 이에 본 연구에서는 SWMM 모형을 기반으로 저영향개발 시설의 설계를 위한 의사결정지원시스템인 WMAM(Water Management Analysis Module)을 개발하였다. WMAM은 저영향개발 시설과 관련된 다양한 매개변수 중에서 최종 유출량에 영향을 미치는 매개변수의 추출이 가능하다. 또한, 저영향개발 시설의 설계 및 계획 매개변수에 대한 다양한 시나리오를 생성하고, 짧은 시간에 동시에 모의 분석을 수행하여 수문학적 측면에서 효과적인 시나리오를 도출해준다. 본 연구에서는 WMAM의 효과성을 보여주고자 A대학교를 모델링한 SWMM 모형에 저영향개발 시설 중 하나인 침투트렌치의 (1)계획 전과 (2)계획 후, 그리고 (3)WMAM을 적용하였을 경우의 첨두유량과 침투손실 결과를 비교하였다. 침투트렌치 설치 전의 첨두유량은 약 0.48 CMS로 세가지 경우 중 가장 높은 값을 보였으며, 침투트렌치 설지 후와 WMAM을 활용한 경우의 첨두유량은 점차 낮아졌다. 또한, 침투손실량을 보면 설치전에는 약 0.28 m로 가장 낮았으며, 설치 후 그리고 WMAM을 활용하였을 경우는 점차 그 값이 높아졌다. 본 연구를 통해, WMAM이 저영향개발 시설의 설계 및 계획에 있어서 수문학적으로 효과적인 결과를 보이는 것을 확인할 수 있었으며, 향후 보완과 추가 개발을 통해 수자원 계획 및 관리에 있어서 유용한 프로그램이 될 수 있을 것으로 기대된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제24권1호
• /
• pp.100-106
• /
• 2020

In this paper smart shoes for dementia care using embedded boards and Low Power Wide Area technology and their application software are implemented. The communication board composed of Cortex-M3 board and LoRa module is embedded into groove made in outsole of smart shoes. Including the mold, the shoe outsole was manufactured by hand. By using application software and embedded board, caregiver can track the position of dementia patient using GPS and LoRa network. The location tracking and data transmission operations of smart shoes have been successfully verified in the outdoor environment. The smart shoes of this paper are applicable to a safety device to prevent the disappearance of demented patients through results of experiments and if bigdata is collected and analyzed by deep-learning, it may be helpful to analyze the predictive path of dementia patients or the pattern of dementia.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제42권4호
• /
• pp.559-569
• /
• 2022

Infrastructure engineering is a field that supports construction (assembly) as a representative industry that creates high added value and jobs by combining science and technology with knowledge, though its importance is underestimated. According to a report from the Ministry of Land, Infrastructure and Transport (Korea), the value-added rate (65.3%) of the engineering industry and the employment inducement coefficient (14 employees per billion won) are three times higher than in manufacturing. In particular,the forward value chain (such as project management and basic design) accounts for less than 10~15% of the total project cost but determines the overall price and quality of the infrastructure facilities. In this study, a work break-down system, design support module and database development method for road design projects for design platform development is presented. Based on the presented development method, a cloud-based infrastructure design platform's prototype is developed. The developed infrastructure engineering platform is expected to provide a web-based design work environment without time/space restrictions and greatly contribute to winning overseas business orders and securing competitiveness.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• 제13권6호
• /
• pp.496-502
• /
• 2020

The electronic attendance management system is being introduced and operated on a pilot basis by some universities and educational institutions. However, most of the related systems have installed and operated the existing barcode and magnetic card systems. Classroom attendance is managed by introducing RF cards, but it causes problems such as recognition distance (less than 5cm) and the need for a check process in which students have to read the card each time with a reader for attendance. Also, it is not possible to respond in real time to the situation of midterm (early leave, absence from the second lecture time, etc.) because it is used in the lecture time of one subject with the record checked once. In order to solve these problems, the various mobile attendance systems proposed to solve these problems are also unable to fundamentally solve problems such as interim attendance and proxy attendance because they check attendance using only the application of a smartphone. In this paper, we use geofencing technology, which is a positioning-based technology that detects the entry and exit of people, objects, etc. in areas separated by virtual boundaries. The proposed system solves the problem of intermediate attendance and alternate attendance by setting the student to automatically record the access record when entering and leaving the classroom set as a geofence with a smartphone. In addition, it also provides a function to prevent unintentional mistakes that occur through the smartphone by limiting some of the functions of the smartphone such as silence, vibration, and Internet use when entering the classroom.