• 한국염색가공학회지
• /
• 제21권4호
• /
• pp.23-32
• /
• 2009

The objective of this study is to investigate the efficacy of leaf powder colorants as substitutes for traditional indigo dyeing. Leaf powder colorants were prepared by hot air($50^{\circ}C$) and room temperanrre($25^{\circ}C$) drying methods from fresh leaves. The presence of indigo in the leaf powder colorants was confirmed by UV/Visible absorption spectra. All the powder colorants showed broad absorption at 602 nm as same as synthetic indigo. Dyeing was done by reduction method with sodium hydrosulfite and sodium hydroxide. Leaf powder colorants produced blue color on silk fabrics, showing similar color to the one dyed traditionally with fresh juice extract. The powder colorants prepared at room temperature drying were more stable for long term storage than that prepared by hot air drying. Thus, the powder colorants prepared by room temperature drying was reduced and dyed in one-step process without sodium hydroxide in the dyebath for further investigate dyeing properties. K/S value of the fabric dyed without sodium hydroxide was much higher than one dyed with sodium hydroxide. Regardless of the addition of sodium hydroxide, rubbing fastness was fairly good showing above 4 rating. Fastness to dry cleaning and light of the fabrics dyed without sodium hydroxide were mote higher than that dyed in alkaline condition.

• 복식문화연구
• /
• 제9권4호
• /
• pp.616-628
• /
• 2001

The purpose of this research is to create a polyester sample book that serves as a point of reference that exporters in the Taegu area can allude to when exporting to the U.S. By getting this project off the ground, we can expect to make a worthy contribution to the manufacture of high-quality, value-added fashion & textile goods. The research was conducted as follows. First, a study was carried out in the local market ensued by consumer surveys with regards to consumer attitude on man-made fibers, market researches, and interviews with experts, all in conjunction with the Color Association of the U.S. Also, a diverse array of fabric swatches were collected from Manhattans fabric wholesalers and then classified by color and fabric type fur the sample book. In short, this research found that man-made fibers have full marketability in the U.S. Thus, in order for Taegus synthetic textile firms to be successful in exporting to the US, it is essential that they come up with fabrics that have properties resembling natural fibers such as having a soft hand, natural sheen, smooth draping, and diverse textures as well as being in line with the current trends. In addition, it is also necessary to develop fabrications that are versatile and functional. Thus, by developing innovative fabrications, the synthetic textile business will turn toward the production of high-quality synthetics and will also provide a platfrom for strengthening the competitive edge of Koreas textile & fashion business.

• 한국염색가공학회지
• /
• 제3권2호
• /
• pp.16-24
• /
• 1991

The textile fabric have the functions of sanitation, decoration, wearing style and washing in the practical use. Among various texitle fiber, silk has less utilities than synthetic fiber in practical use although silk has good benefits of the high quality. Thus no textile fiber, neither natural nor synthetic, has all the functions. In this sence, many blend yarns have been improved various functions of fabric. However, this has been disturbed with the problem of dyeing, especially in the case of blend fabric of silk. In this study, we dyed silk/PET blend fabric in one step useing one bath dyeing method by acid dyes/disperse dyes. The results of the experiments can be summarized as follows; 1) Yellow index of silk fabric treated at $130^{\circ}C$ increased about 7.8 (color difference 4.5 NBS) and whiteness decrease about 5%. 2) Both elongation and tensile strength of silk fabric treated at $130^{\circ}C$ of pH 5-6 decreased about 10% and tensile strength of silk spun yarn treated at $60^{\circ}C$ of pH 10 have little changed. 3) While silk/PET blend frbric dyeing, silk soiling of disperse dyes causes from difference of dyeing rate and degree of silk soiling with dyes. 4) Fastness and soiling of silk/PET blend fabric dyed by one bath dyeing method of acid dyes/disperse dyes was same as two bath dyeing method.

• 복식
• /
• 제66권6호
• /
• pp.110-121
• /
• 2016

The purpose of this study is to develop high value-added uniform design in response to climate change, and produce high sensitivity uniforms that conserve the energy of its wearers. The scope of the study encompassed entire production stage from the product planning stage to developing a prototype to collecting consumer ratings to securing intellectual property. The results of the study are as follows. First, the material was developed that maximizes insulation by replicating human body heat radiation and raising the temperature by 5 degree Celsius. Second, through Time to Market system, a luxurious synthetic wool material was developed, and warm effect was achieved. Third, pattern design engineering for easy movement and design development allowed the realization of uniform design that is compatible indoors and outdoors as well as respond to highly active climate change. Fourth, Fifth, the developed design was registered and intellectual property rights were obtained.

• 감성과학
• /
• 제9권spc3호
• /
• pp.243-249
• /
• 2006

최근 직물 디자이너를 위한 직물 디자인 CAD, 의류 디자이너를 위한 패턴 디자인 CAD와 같은 상업화된 많은 CAD 시스템이 운영되고 있다. 그러나 소재를 제직하는 직물 제직 공장에서 적용할 수 있는 직물 설계디자인 시스템은 아직까지 운영되고 있지 않다. 그래서 본 연구에서는 직물설계에 관한 데이터 베이스 시스템의 초기 연구로서 여러 가지 실의 번수, 직물조직, 원료소재에 따른 직물의 경사와 위사 밀도를 쉽게 결정할 수 있는 직물 디자인 시스템에 관한 연구를 직물공장에서 사용하고 있는 나일론과 폴리에스테르 등의 합섬직물 설계서를 분석하여 수행하고자 한다.

• 한국의류산업학회지
• /
• 제11권2호
• /
• pp.337-343
• /
• 2009

This study systematically investigated a method for extraction of safflower (Carthamus tinctorius Linnaeus) colorants by ultrasonic treatment. Compared to pigments productivity and cell wall structures of safflower after general and ultrasonic method, the ultrasonic method showed high extraction efficiency of safflower pigments due to destruction of safflower cell wall caused by high vibration energies. Microscopic analysis confirmed the hypothesis that the ultrasonic treatment of safflower caused its cell wall structure loosened and made efficient extraction of safflower pigments. And also, LC-MS/MS analysis revealed that productivities of the yellow and red safflower pigments by ultrasonic method were 21.9% and 14.6% higher, respectively, than those of pigments extracted by general method. The ultrasonic extracted yellow and red colorants could be used to dye not only natural fibers like cotton, silk and wool, but also synthetic fiber like nylon, and generally gave a better color tone than the general extracted colorants from safflower due to the affinities of red and yellow colorant on different fibers. As the yellow and red colorant were extracted by ultrasonic treatment in water, the K/S value on of 550/440nm of cotton and rayon was increased but in the case of silk and wool the change of this value was almost not detected. Finally, this technique might provide a solution to establish reproducibility and standardization for the extraction and dyeing methods on fabrics.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.290-296
• /
• 2014

In order to produce black disperse dye which has high heat resistance and depth color for polyester(PET), an orange disperse dye was designed and synthesized with pyridine based derivatives to get high heat resistance. Disperse blue dye adopts heterocycles structure for high molar extinction coefficient and long wavelength absorption. Synthesized disperse dye is micronized to an particle size of $0.7{\mu}m$. The mixing condition for black color using commercial disperse violet 93 is blue dye 30%, red dye 21%, and orange dye 21%, respectively. Dyed PET fabric with synthesized dye has quiet good color fastness to sublimation(grade 3-4) and has excellent rubbing, washing and light fastness grade 4-5.

• 한국염색가공학회지
• /
• 제30권1호
• /
• pp.20-28
• /
• 2018

The near infrared ray camouflage fabric has a near infrared ray reluctance similar to the surrounding environment and has a camouflage effect on the surrounding environment. Synthetic fibers used in military uniforms are difficult to have gastrointestinal function as general commercial dyes, unlike cellulose fibers, which use some commercial vat dyes to impart infrared gastrointestinal function. In this study, we optimized the adsorption pH, temperature and time for NIR dye application for polyester fabrics, and established the optimum concentration for the evaluation of adsorption build-up characteristics. In addition, it is difficult to adsorb it since the polyester material has a dense crystal structure and the NIR dye is bulky. Therefore, a swelling agent used for dyeing meta-aramid fibers with high Tg and high crystallinity was introduced as a separate preparation to increase the affinity to polyester, which is a hydrophobic fiber, to thereby obtain an excellent adsorption rate. As a result of comparing before and after using swelling agent, the adsorption rate difference was 10 times or more when compared with before.

• 한국염색가공학회지
• /
• 제26권3호
• /
• pp.201-208
• /
• 2014

The high value-added functionality for synthetic fiber can be considered through a plasma enhanced treatment. In this study, PET(Polyethyleneterephthalate) was treated with a glow plasma and corona treatment. Surface characteristics of treated fabric were investigated using electron scanning microscopy(SEM), contact angle, X-ray photoelectron spectroscopy(XPS), tensile and adhesion strength. It was found that the contact angle showed $85.5^{\circ}$ for untreated fabric, $0^{\circ}$ for plasma and corona treatment at the condition of 200W for 7min. By XPS analysis, atomic ratio of O 1s/C 1s was increased from 0.27 to 0.43 by glow plasma and 0.27 to 0.41 by corona treatment at 200W for 7min, respectively. Glow plasma and corona treatment did not significantly change the tensile strength of PET fabric. Adhesion strength showed a substantial enhancement for the surface treated with the glow plasma, while corona treatment was adversely affected.

• 패션비즈니스
• /
• 제8권6호
• /
• pp.68-77
• /
• 2004

Hollow filament yarns provide better warmth to the touch, lighter in weight, increased opacity, and subtle luster compared to the regular synthetic filament yarns. However, luster properties of textile fibers or fabrics are often difficult to characterize, partly due to the fineness of the surface texture, the anisotropic nature of the weave structure, the complexity of the fiber array comprising a yarn, and the fiber structure itself. In this study, the fabric surface luster image was analyzed using image analysis methods after image acquisition. The hollow filament fiber was modeled using a three-dimensional modeling software. It was then ray-traced for comparing the virtual luster images of the hollow fiber and the regular fiber models based on shading models including photon mapping. The luster object size of the actual hollow filament fabric was smaller than that of the regular filament fabric. The shape of the luster object of the hollow filament fabric was dual peak type while that of the regular filament was single.