• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.794-796
• /
• 2000

This paper analyzes the method of cascading 74LS163 4-Bit Binary Counters. The 74LS163 4-Bit Binary Counter has synchronous LD. CLR functions and especially ENT, ENP, RCO to cascade some chips in order to count more 4bit binary number. The maximum operating frequency may vary according to the method of cascading. The Data sheet from Texas Instruments introduces two methods, The Ripple Carry Mode Circuit and The Carry Look Ahead Circuit, and shows that The Carry Look Ahead Circuit is more efficient than the other. However, there are only little information for user to understand and apply this to other circuits. Thus, we not only analyzed the two methods but also compared with each other in the point of performance.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.68-69
• /
• 2014

In the battery based applications such as electric vehicle and energy storage system, the performance of the system highly depends on the reliability of the battery. However, it is difficult to obtain the accurate information about the state-of-health (SOH) of battery during its operation. In this paper a 3kw battery charger with battery diagnosis function which can estimate the SOH of the battery by using online impedance spectroscopy technique is introduced. For the charger phase shift full bridge converter with synchronous rectification has been adopted to implement the charge and diagnosis functions. The impedance spectroscopy is performed after the charge to obtain the information about the internal impedance of the battery module, hence the SOH can be estimated online by observing the impedance variation of the battery over time. All the design procedure of the proposed charger is detailed and the feasibility of the system is verified by the experimental results.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2540-2542
• /
• 1999

This paper presents a new speed and position sensorless control method of permanent magnet synchronous motors based on the sliding mode observer. The sliding mode observer structure and its design method are described. Also, Lyapunov functions are chosen for determining the adaptive law for the speed and the stator resistance estimator. The effectiveness of the proposed observer is confirmed by the experimental results.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.162-165
• /
• 2003

A resonant type voltage source and power device and a control method using Pulse Density Modulation(PDM) power control and Pulse Width Modulation(PWM)voltage control for plasma sterilization are described. For the stability of discharge in the generating tube, it is desirable that the peak apply voltage is constant. The PDM power control is employed for sustaining the voltage constant at any generating tube input power. Moreover, to avoid the influence of input AC voltage fluctuation etc., PWM voltage control with generating tube peak voltage feedback is used. Both functions were confirmed by the experiment with inverter and generating tube. The effect of input synchronous PDM method for input current stabilizing is confirmed also.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.3
• /
• pp.415-422
• /
• 2010

The distributed flexible alternative current transmission system (D-FACTS) is a recently developed FACTS technology. Distributed Static Series Compensator (DSSC) is one example of DFACTS devices. DSSC functions in the same way as a Static Synchronous Series Compensator (SSSC), but is smaller in size, lower in price, and possesses more capabilities. Likewise, DSSC lies in transmission lines in a distributed manner. In this work, we designed a fuzzy logic controller to use the DSSC for enhancing transient stability in a two-machine, two-area power system. The parameters of the fuzzy logic controller are varied widely by a suitable choice of membership function and parameters in the rule base. Simulation results demonstrate the effectiveness of the fuzzy controller for transient stability enhancement by DSSC.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.139-142
• /
• 2002

A resonant type voltage source and power device and a control method using Pulse Density Modulation(PDM) power control and Pulse Width Modulation(PWM) voltage control for Ozone Generator are described. For the stability of discharge in the generating tube, it is desirable that the peak apply voltage is constant. The PDM power control is employed for sustaining the voltage constant at any generating tube input power. Moreover, to avoid the influence of input AC voltage fluctuation etc., PWM voltage control with generating tube peak voltage feedback is used. Both functions were confirmed by the experiment with 6.5[kHz], 1.8[kW] inverter and generating tube. The effect of input synchronous PDM method for input current stabilizing is confirmed also.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.221-228
• /
• 2002

The NAVER is based on a cluster of low-cost personal computers. The goal of NAVER is to provide flexible, extensible, scalable and re-configurable framework for the diverse virtual environments especially for Gamsung research experiments. Personal computers are divided into three servers are according to their specific functions: Render Server, Device Server and Control Server. While Device Server contains external modules requiring event-based communication for the integration, Control Server contains external modules requiring synchronous communication every frame. And, the Render Server consists of 5 managers: Scenario Manager, Event Manger, Command Manager, Interaction Manager and Sync Manager. In this paper, we discuss NAVER as effective distributed system and its application to Gamsung experiment.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.74-81
• /
• 1997

Xcent-Net is a new system network designed to support a clustered SMP called SPAX(Scalable Parallel Architecture based on Xbar) that is being developed by ETRI. It is a duplicated hierarchical crossbar network to provide the connections among 16 clusters of 128 nodes. Xcent-Net is designed as a packet switched, virtual cut-through routed, point-to-point network. Variable length packets contain up to 64 bytes of data. The packets are transmitted via full duplexed, 32-bit wide channels using source synchronous transmission technique. Its plesiochronous clocking scheme eliminates the global clock distribution problem. Two level priority-based round-robin scheme is adopted to resolve the traffic congestion. Clear-to-send mechanism is used as a packet level flow control scheme. Most of functions are built in Xcent router, which is implemented as an ASIC. This paper describes the architecture and the functional features of Xcent-Net and discusses its implementation.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.37-39
• /
• 2005

This paper is proposed maximum thrust design of slotted Permanent Magnet Linear Synchrous Motor (PMLSM) using surface harmonic method considering slot effect. The genetic algorithm is used for optimization. The objective functions are the maximum thrust and the minimum detent force. This time, design parameters are set as PM width, PM height and slot width.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.52-54
• /
• 2002

A resonant type voltage source and power device and a control method using Pulse Density Modulation(PDM) power control and Pulse Width Modulation(PWM) voltage control for plasma sterilization are described, For the stability of discharge in the generating tube, it is desirable that the peak apply voltage is constant. The PDM power control is employed for sustaining the voltage constant at any generating tube input power. Moreover, to avoid the influence of input AC voltage fluctuation etc.. PWM voltage control with generating tube peak voltage feedback is used. Both functions were confirmed by the experiment with 6.5[kHz], 1.8[kW] inverter and generating tube. The effect of input synchronous PDM method for input current stabilizing is confirmed also.