• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.704-708
• /
• 1996

The elastic dynamic crack curving could be obtained by controlling the loading rate, the initial crack-tip blunting to store much energy before crack initiation and the magnitude of reflected wave from finite boundaries. However there is no theoretical and experimental elastic-plastic dynamic curving study. This paper proposes a specimen geometryfor a study of dynamic elastic-plastic crack curving and presents a preliminary result. The specimen has a blunt physical crack tip on a side, and a round notch tip on the other side. From the experiment using this specimen, it is found that the narrow plastic zone ahead of the round notch tip produces the change of load direction and anti-symmetricity of the dynamic isochromatics, and each result causes the crack curving phenomenon. After a certain time, as the elastic-plastic crack gets close to the round notch tip near, the degree of the crack curving get larger. The elastic reack curving propagates more sensitively to the surround of crack tip than the plastic crack curving does. The cynamic elastic-plastic crack curving is found to be proportional to the CTOA(the crack tip opening angle). The dynamic elastic-plastic crack may propagate in the direction perpendicular to the loading. An apparant strip yield zone which is similar to the Dugdale strip yield zone is noted ahead of the physical crack tip.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2797-2804
• /
• 1994

This paper analyzes the behaviors of corrugated membrane under the cryogenic liquid pressure and thermal loading using the FEM analysis program MARC. The FEM calculations were carried out on the basis of measured data of Technigaz membrane. It is very important to know the concentration levels and distributions of stress in the corrugated membrane. A quarter of the membrane sheet in place of the whole membrane was simulated because of its geometric symmetricity. The calculated results of the concentrated stress showed that the maximum stress occurs at the knot parts and at the root corner radius of the corrugations. The FEM calculated results indicated that the ring knot membrane which was developed in this study showed uniformly distributed stress and the lowest stress levels in the cross knot area in comparison with other two membranes. These results are very important to optimize the shape and improve the safety of membrane structure.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.11
• /
• pp.1445-1454
• /
• 1995

In this study, we have developed a prototype of the automatic defects detection system for capsule inspection using the computer vision techniques. The subjects for inspection are empty hard capsules of various sizes which are made of gelatine. To inspect both sides of a capsule, 2-stage recognition is performed. Features we have used are various lengths of a capsule, area, linearity, symmetricity, head curvature and so on. Decision making is performed based on average value which is computed from 20 good capsules in training and permission bounds in factories. Most of time-consuming process for feature extraction is computed by hardware to meet the inspection speed of more than 20 capsules/sec. The main logic for control and arithmetic computation is implemented using EPLD for the sake of easy change of design and reduction in time for developement. As a result of experiment, defects on size or contour of binary images are detected over 95%. Because of dead zone in imaging system, detection ratio of defects on surface, such as bad joint, chip, speck, etc, is lower than the former case. In this case, detection ratio is 50-85%. Defects such as collet pinch and mashed cap/body seldom appear in binary image, and detection ratio is very low. So we have to process the gray-level image directly in partial region.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.4
• /
• pp.51-58
• /
• 2018

PURPOSE: This study was conducted to determine if the Harrison hip score (HHS), a tool for assessing hip joint function, and the Burg balance scale (BBS), a general balance assessment tool, actually reflect the balance ability of total hip arthroplasty (THA) patients 3 months after surgery. In addition, this study investigated the initial weight distribution strategy for bilateral lower extremity after THA surgery to understand the balance of THA patients. METHODS: Fourteen 3-month THA patients performed static dual standing and sit-to-stand (STS) tasks. Ground reaction forces on each leg were collected to calculate the weight distribution symmetricity (SWD), and the HHS, functional HHS (f-HHS), and BBS were evaluated. Correlation analyses between SWD and the HHS (also f-HHS) and BBS were then applied to the THA patients. RESULTS: The correlations between functional evaluation tools (HHS, f-HHS, BBS) and SWD were weak strength for the static balance task, but moderate for the dynamic STS task. Among the evaluation tools used in the present study, f-HHS was most useful for evaluation of dynamic balance ability. CONCLUSION: The results suggest that use of HHS, f-HHS, and BBS as functional evaluation tools does not provide meaningful information regarding balance ability, but that they are useful for evaluating dynamic balance ability of THA patients. The dynamic balance ability at 3 months after THA seems to be under development.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.5
• /
• pp.707-718
• /
• 1997

This paper presents an efficient numerical method for the computation of eigenpair derivatives for a real symmetric eigenvalue problem with distinct and multiple eigenvalues. The method has a very simple algorithm and gives an exact solution. Furthermore, it saves computer sotrage and CPU time. The algorithm preserves not only the symmetricity but also the band width of the matrices, allowing efficient computer storage and solution techniques. Results from the proposed method for calculating the eigenpair derivatives are compared with those from Rudisill and Chu's method and Nelson's method which is known efficient one in the case of distinct natural frequencies. As an example to demonstrate the efficiency of the proposed method in the case of distinct eigenvalues, a cantilever plate is considered. The design parameter of the cantilever plate is its thickness. For the eigenvalue problem with multiple natural frequencies, the adjacent eigenvectors are used in the algebraic equation as side conditions, lying adjacent to the multiplicity of multiple natural frequency distinct eigenvalues, which appear when design parameter varies. A cantilever beam is used to demonstrate the efficiency of the proposed method in the case of multiple natural frequencies. Results form the proposed method for calculating the eigenpair derivatives are compared with those from Dailey's method(an amendation of Ojalvo's work) which finds the exact eigenvector derivatives. The design parameter of the cantilever beam is its height. Data is presented showing the amount of CPU time used to compute the first ten eigenpair derivatives by each method. It is important to note that the numerical stability of the proposed method is proved.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.91-98
• /
• 1999

This paper describes the air flow characteristics inside the throttle valve. Tow-dimensional steady incompressible Navier-Strokes equation are solved numerically with embedding the conceopt of the artificial compressibility and adopting the Baldwin-Lomax turbulence model. With varying the valve opening angles(the Reynolds number )such as 15$^{\circ}$(5000) , 45$^{\circ}$(3000) , 75$^{\circ}$(7000) and 90$^{\circ}$(10000), respectively. tow cases, with a valve shaft and without one, are analysed. The pressure loss between the entrance and exit is severe at 15$^{\circ}$, 100 times as larger as that of 90$^{\circ}$ case, which also depends much on the existece of the valve shaft. The counter rotating vortices are formed over the valve plate with the shaft at only 75$^{\circ}$. They are smally and very large scale in front and back of the valve shaft , respectively. The velocity profiles of 15$^{\circ}$ and 90$^{\circ}$ at the exit are almost symmetric to the horizontal center line, however, the symmetricity is no longer maintained at 45$^{\circ}$ and 75$^{\circ}$ , and in addition, the flow at 75$^{\circ}$ is enforced a lot below center line. The pressure distribution on the walls is largely changed near the valve shaft, and its magnitude becomes great as the valve angle decreases.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.8 no.1
• /
• pp.113-122
• /
• 1997

The purpose of this study was to examine brain structural abnormalities in autistic children. Magnetic resonance imaging(MRI) findings in 22 male children with a DSM-Ⅲ-R diagnosis of autistic disorder and 17 non-autistic male control children were investigated. The ratio measures by lineometry was used to examine the cerebrum, midbrain, cerebellum, brain stem and ventricular system. The left to right ratio of the lateral ventricle was larger in autistic children than in controls. The pons was significantly larger in autistic children than in controls, and the cerebellum was smaller in autistic children. There were no significant differences between autistic children and controls in the symmetricity of the fontral lobe, parietal lobe, occipital lobe and temporal lobe, and in the size of the midbrain and 4th ventricle. These findings suggest that autistic disorder may be related to structural impairment of the brain.