• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.659-665
• /
• 2008

If ranging processes are not frequent in an uplink OFDMA system, the timing synchronization between base and mobile stations may not be maintained. Especially in the case of infrequent random accesses in a large cell, timing offsets can be considerable and the destroyed orthogonality of OFDMA signals may result in the degraded performance. This paper proposes a novel random access scheme for uplink OFDMA systems, which support the orthogonality of OFDMA signals with timing offsets by allowing a random access OFDMA symbol shorter than a normal one. In order to make uplink OFDMA systems robust to timing offsets, the proposed scheme inserts a zero-padding region in an OFDMA symbol.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.109-114
• /
• 2015

Frame synchronization is achieved by correlation between received symbols and a preamble pattern which is periodically appended at a frame header. In this paper, we deal with a frame detection method complaint with satellite-based DVB-S2 system. In DVB-S2, frame synchronization is performed under the low signal-to-noise ratio(SNR), a large frequency offset which can be up to 20% of a symbol transmission rate and unknown modulation schemes ranging from QPSK to 32-APSK. In this environment, we propose a method combining differential correlation based on SOF and PLSC with an accumulated correlation method for the detection of frame structures. In addition, detection performances about mean acquisition time(MAT) and detection error probability are evaluated via computer simulations.

• Journal of Communications and Networks
• /
• v.1 no.2
• /
• pp.89-98
• /
• 1999

In a synchronization (sync) $network^1$containing N nodes, it is shown (Theorem 1c) that an arbitrarily connected sync network & is the union of a countable set of isolated connecting sync networks${&_i,i= 1,2,.., L}, I.E., & = \bigcup_{I=1}^L&_i$ It is shown(Theorem 2e) that aconnecting sync network is the union of a set of disjoint irreducible subnetworks having one or more nodes. It is further shown(Theorem 3a) that there exists at least one closed irreducible subnetwork in $&_i$. It is further demonstrated that a con-necting sync network is the union of both a master group and a slave group of nodes. The master group is the union of closed irreducible subnetworks in $&_i$. The slave group is the union of non-colsed irre-ducible subnetworks in $&_i$. The relationships between master-slave(MS), mutual synchronous (MUS) and hierarchical MS/MUS ent-works are clearly manifested [1]. Additionally, Theorem 5 shows that each node in the slave group is accessible by at least on node in the master group. This allows one to conclude that the synchro-nization information avilable in the master group can be reliably transported to each node in the slave group. Counting and combinatorial arguments are used to develop a recursive algorithm which counts the number $A_N$ of arbitrarily connected sync network architectures in an N-nodal sync network and the number $C_N$ of isolated connecting sync network in &. EXamples for N=2,3,4,5 and 6 are provided. Finally, network examples are presented which illustrate the results offered by the theorems. The notation used and symbol definitions are listed in Appendix A.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.4
• /
• pp.424-432
• /
• 2016

World's leading countries are developing next generation digital broadcasting system specifications to support UHDTV (ultra-high definition television) contents and other various services. In order to maximize the transmission capacity by using the bandwidth efficiently, most broadcasting systems adopt MIMO-OFDM. In distributed-MIMO systems, multiple transmit antennas are spatially separated and therefore result in multiple timing offsets. To overcome this problem, this paper proposes a technique using a null symbol to detect each individual signal from distributed transmit antennas. By inserting null symbols before preambles, the receiver can distinguish the signals between each transmit antennas and perform frame synchronization. When the reception time difference is shorter than 500 samples, the proposed method outperforms the conventional method.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.77-84
• /
• 2014

In this paper, we propose the hierarchical network synchronization scheme that is backward compatible for the existing commercial system, efficient for total system performance, and whose hardware modification is minimized. This system performance is, the relationship among bandwidth efficiency, complexity and MODEM performance, and superiority of network system applicability. The proposed structure can remedy the high hardware complexity and the lower accuracy of network sychronization that the existing satellite communication terminal system in the star network based on TDM/MF-TDMA of DVB-S2/RCS standards has. Besides, It has high efficiency in view of cost and system performance if the system designed for satellite broadcast requires system upgrade. In the body section, its hardware complexity and system performance of the proposed algorithm is analysed theoretically and treated with the related parameters(symbol rate, spreading factor, etc.) and the BER performance of control channel through the computer simulation for its verification that it can be applied for communications system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.468-475
• /
• 2009

In OFDM-based Full Duplex Relays (FDR) with Decode and Forward (DF) scheme, an interference cancellation technique in the frequency domain is more efficient than the one in the time domain. However, an Inter-Symbol Interference (ISI) and Inter-Carrier Interference (ICI) may occur due to the timing mismatch between the feedback interference signal and the desired signal from Base Station (BS) when the feedback interference cancellation and demodulation are performed in the frequency domain. In this paper, the effects of timing mismatch on the synchronous type and asynchronous type of OFDM-based FDR are analyzed for uplink and downlink cases. Then, synchronization procedure and methods for reducing ISI and ICI in OFDM-based FDR with frequency-domain feedback interference canceller are proposed and verified by computer simulation.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.319-324
• /
• 2022

If radio interference occurs or there is no navigation device, radio navigation of high-speed moving object becomes impossible. Nevertheless, if there are multiple ground stations and precise range measurement between the high-speed moving object and the ground station can be secured, it is possible to estimate the position of moving object. This paper proposes a position estimation method using high-precision TDOA measurement generated using TLM signal. In the proposed method, a common error of moving object is removed using the TDOA measurements. The measurements is generated based on TLM signal including SOQPSK PN symbol capable of precise timing synchronization. Therefore, since precise timing synchronization of the system has been performed, the timing error between ground stations has a very small value. This improved the position estimation performance by increasing the accuracy of the measured values. The proposed method is verified through software-based simulation, and the performance of estimated position satisfies the target performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.992-1003
• /
• 2007

In this paper, a channel estimation technique based on pilot tones, which does not degrade channel estimation performance even with the existence of symbol timing offset (STO) in OFDM systems, is proposed. The proposed technique performs channel estimation by interpolating channels with respect to amplitude and phase with a minimum computational complexity, differently from the conventional interpolation techniques. The proposed technique requires neither the estimation of fine STO in advance nor trigonometric operation for phase interpolation, signifying a significant reduction in computational complexity. Since the performance of the proposed technique does not depend on the STO present in OFDM systems. It can be directly applied to the following areas in OFDM-based communication system: elimination of fine STO estimation step in the synchronization procedure, elimination of STO estimation step in multiuser uplink, and channel estimation in multi-hop relay system. It is verified by computer simulation that the proposed technique can improve the performance of channel estimation significantly in the presence of STOs, compared with previous channel estimation techniques based on pilot tones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1081-1091
• /
• 2005

Unlike conventional DVB-T transmission with the streaming method, DVB-H system based on the IPDC(IP Data Casting) method uses Time-slicing scheme to achieve the maximization of portability by reducing the power consumption of a receiver. To enhance the power efficiency of the receiver, Time-slicing scheme controls the receiver operation to perform only for corresponding burst in specific time slot. The additional power saving can also be achieved by reducing the required time for synchronization. In this paper, we propose a fast scattered pilot synchronization algorithm, which detects the pilot pattern of currently received OFDM symbol. The proposed scheme is based on the correlation between the adjacent subcarriers of potential scattered pilot position in two consecutively received OFDM symbols. Therefore, it can reduce the time for the scattered pilot synchronization within two symbols as com-pared with the conventional method used for DVB-T. And the proposed algorithm has better performance than the two schemes proposed by Nokia for DVB-H and the method using correlation with reference signal. Extensive com-puter simulation is performed based on ETSI EN300 744 ETSI and performance results show that the proposed algorithm has more efficient and stable operation than the conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.527-539
• /
• 2009

In this paper, we propose an asynchonous ICI (Inter-Cell Interference) mitigation techniques for 3GPP LTE MIMO-OFDMA down-link receiver. An increasing in symbol timing misalignments may occur relative to sychronous network as the result of BS (Base Station) timing differences. Such symbol synchronization errors that exceed the guard interval or the cyclic prefix duration may result in MAI (Multiple Access Interference) for other carriers. In particular, at the cell boundary, this MAI becomes a critical factor, leading to degraded channel throughput and severe asynchronous ICI. Hence, many researchers have investigated the interference mitigation method in the presence of asynchronous ICI and it appears that the knowledge of the SCM (Spatial Covariance Matrix) of the asynchronous ICI plus background noise is an important issue. Generally, it is assumed that the SCM estimated by using training symbols. However, it is difficult to measure the interference statistics for a long time and training symbol is also not appropriate for MIMO-OFDMA system such as LTE. Therefore, a noise reduction method is required to improve the estimation accuracy. Although the conventional time-domain low-pass type weighting method can be effective for noise reduction, it causes significant estimation error due to the spectral leakage in practical OFDM system. Therefore, we propose a time-domain sinc type weighing method which can not only reduce the noise effectively minimizing estimation error caused by the spectral leakage but also implement frequency-domain moving average filter easily. By using computer simulation, we show that the proposed method can provide up to 3dB SIR gain compared with the conventional method.