• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.157-158
• /
• 2011

This paper deals with the minimization of switching loss of a dual full-bridge bidirectional DC-DC converter for supercapacitor. In case of charging mode the switching loss can be minimized with proper switching pattern, and the switching loss in discharging mode can be minimized with soft switching. Simulation results show that the switching loss is reduced considerably.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.9
• /
• pp.118-125
• /
• 1997

This paper proposed a new partial resonant 3.PHI. AC-DC boost converter of high efficiency using lossless snubber. The proposed converter, DCM (Discontinuous Current Mode) has a merit of simple controlled circuit because the input current control discontinuously. But turned off switching loss and stress of the switching device increase when the switch turned off at the peak of current. Therefore, the paper improves efficiency by adopting the PRS$^{2}$(Partial Resonant Soft Switching) in 3.PHI. AC-DC boost converter and makes the unity power factor. The PRS$^{2}$ is reduced a current/voltage stresses of switching devices. Also, a DCMPRS$^{2}$M(Discontinuous Conduction Mode Partial Resonant Soft Switching Method) appear the current and voltage equation of this circuit. The paepr examine in a 3.PHI. AC-DC boost converter and show the result of that.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.28-30
• /
• 2008

This paper proposes soft switching boost converter operating in zero current switching(ZCS) mode for photovoltaic and fuel cell power generation. The proposed topology is capable of reducing the size, and capability of passive element by using soft switching, and it allows for reduction of IGBT switching losses, for the increased of switching frequency. A detail mode analysis of operating in presented. We present the converter topology, principle of operation and simulation results obtained from the PSIM simulator. The performance of the proposed technique in evaluation on 1kW(380V,2.6A) experimental prototype circuit operating at 30kHz.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.173-174
• /
• 2010

In this paper, authors propose a new buck-boost converter of discontinuous conduction mode (DCM) added electric isolation. The proposed converter with DCM eliminates the complicated circuit control requirement and reduces the size of components. The general converters of high efficiency are made that the power loss of the used switching devices is minimized. To achieve the soft switching operation of the used control switches, the proposed converter uses a lossless snubber capacitor. The proposed converter achieves the soft-switching for all switching devices without increasing their voltage and current stresses. The result is that the switching loss is very low and the efficiency of converter is high. The soft switching operation of the proposed converter is verified by digital simulation and experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.4
• /
• pp.326-334
• /
• 1991

We propose an optical Asynchronous Transfer Mode(ATM) switching system using free-space optics and an output buffer memory. The distributor system in the switching fabric was analyzed using the Huygens-Fresnel principle and lens transformation. For monochromatic illumination, a pattern similar to the Fourier transform of the input distribution was observed across the output plane. A spatially broadened intensity distribution across the the output plane can be expected when the system is illminated with a partially coherent, quasimonochromatic beam. Spatially coherent pulses as short as 100fs can propagate through the distributor without severe spatial broadening.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.103.1-103
• /
• 2002

In variable structure control algorithms, The control law used to realized the desired sliding mode dynamics is discontinuous on the switching manifold. However, due to imperfections in switching, such as time delays, the system trajectory chatters instead of sliding along the switching manifold. This chattering is undesirable because it may excite unmodeled high frequency dynamics in the physical system. In this paper, to overcome this drawback a self-organizing fuzzy sliding mode control algorithm using gradient descent method is proposed. The proposed method has the characteristics which are viewed in conventional VSC, e.g. insensitivity to a class of disturbance, parameter variations and uncertainties ill the sliding mode. To demonstrate its performance, the proposed control algorithm is applied to an inverted pendulum system. The results show that both alleviation of chattering and performance are achieved.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.5
• /
• pp.479-488
• /
• 1991

A novel three-phase quasi-resonant dc link inverter (QRI)with a switch connected between dc voltage source and resonant inductor is proposed. According to the state of switching and load current, the operating mode of the proposed inverter scheme is classified into free-wheeling, inverting, and rectifying mode. By examining the behavior of the circuit in each operating mode, an equivalent circuit which represents all the modes in a unified manner is derived. The operating principle of QRI at inverting mode is analyzed, and it is shown that the maximum voltage of resonant dc link is confined to twice the dc source voltage and that both the zero voltage switching of inverter and the zero current switching of inserted switch are guaranteed. An appropriate current control algorithm is suggested, and the opeating characteristics of proposed resonant inverter are verified through both simulation and experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.28 no.1
• /
• pp.48-58
• /
• 2023

This paper presents the digital control techniques of a bidirectional CRM(critical-conduction mode) buck(boost) converter, a dead-time design method that optimizes ZVS(zero-voltage switching) and valley-switching operation, and a switching-frequency limitation that ensures stable converter operation. To verify the feasibility of the design, a Si-MOSFET-based bidirectional CRM buck(boost) converter is built with 260-430 V input, 160-240 V output, and 1.0 kW rated capacity. The bidirectional CRM converter achieves an efficiency of up to 99.6% at buck mode and 98.7% at boost mode under rated load conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.272-275
• /
• 2008

In this paper, we propose a novel electrode structure for In Plane Switching (IPS) mode LC cell which provides the enhanced transmittance and wider viewing angle as well as less color shift. The simulation results revealed that transmission increases by more than 11.9% and shows less color shift than the conventional S-IPS mode.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.435-436
• /
• 2008