• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.912-921
• /
• 2005

Optical burst switching(OBS) is a promising solution for building terabit optical routers and realizing If over WDM. Channel scheduling Algorithm for reduce contention is one of the major challenges in OBS. We address the issue of how to provide basic burst channel scheduling in optical burst switched WDM networks with fiber delay lines(FDLs). In OBS networks the control and payload components or a burst are sent separately with a time gap. If CHP arrives to burst switch node, because using scheduling algorithm for data burst, reservation resources such as wavelength and transmit data burst without O/E/O conversion, because contention and void between burst are happened at channel scheduling process for data burst that happened the link utilization and bust drop probability Existent proposed methods are become much research to solve these problems. Propose channel scheduling algorithm that use Release Time of bust to emphasize clearance between data and data dissipation that is happened in data assignment in this treatise and maximize bust drop probability and the resources use rate (RTUC : Release Time Unscheduled Channel). As simulation results, Confirmed that is more superior in terms of data drop and link utilization than scheduling algorithm that is proposed existing. As simulation results, confirmed improved performance than scheduling algorithm that is proposed existing in terms of survival of burst, efficiency resource and delay. However, In case load were less, degradation confirmed than existent scheduling algorithm relatively, and confirmed that is superior in data drop aspect in case of load increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2199-2214
• /
• 1994

In order to sufficiently utilize the potential effectiveness of ATM networks, systematic and effective network management and control systems must be employed. In addition to network design, planning, and call routing techniques used in traditional circuit-switched networks. ATM networks can provide logical VP(Virtual Path) reconfiguration capabilities which can adapt to changes in the network environment. With a proper application of the VP reconfiguration technique, ATM networks can reduce the overhead of frequent network redesign and the overhead of call routing processing. However, ATM VP reconfiguration is a very complex and difficult problem which consists of many facets of optimization subproblems such as VP routing. VP sizing, VP terminating point location and VC routing. Most previous research on the ATM logical network reconfiguration problem dealt with the subset of the problem. This paper mathematically formulates the ATM network reconfiguration problem completely considering all subproblems. Since it is very difficult to derive the optimal solution of the formulated problem, we develop a heuristic method based on a Max min bandwidth allocation principle. We show the feasibility of the proposed heuristic method with a simple example.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.1-5
• /
• 2007

Wavelength-division multiplexed (WDM) networks are emerging to be the right choice for the future transport networks. In WDM networks, the optical layer provides circuit-switched lightpath services to the client layer such as IP, SONET and ATM. The set of lightpaths in the optical layer defines the virtual topology. Since the optical switches are reconfigurable, the virtual topology can be reconfigured in accordance with the changing traffic demand pattern at theclient layer in order to optimize the network performance. We present a new approach to the virtual topology reconfiguration and loadbalancing problem for wavelength-routed, optical wide-area networks under dynamic traffic demand. By utilizing the measured Internet backbone traffic characteristics, our approach follows the changes in traffic without assuming that the future traffic pattern is known. For the simulation traffic modeling, we collected the data from real backbone traffic. Experiments show that the standard deviation compared to previous technique is reduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1B
• /
• pp.109-116
• /
• 2004

Optical Burst Switching (OBS) technology has drawn much attention as a promising solution for IP/WDM networks. OBS has the features such as the offset time, the delayed reservation and the burst assembly. In particular, the burst assembly, which assembles IP packets into the data bursts, has a great impact on the performance of OBS network. In this paper, we compare the performance of three different burst assembly schemes and investigate their impact on the performance of OBS network.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.1045-1057
• /
• 1999

Packet-switched multistage interconnection networks(MINs) have been widely used for digital switching systems and super computers. In this paper we show that multiple packets in a switching element can move to the succeeding switching element in one network cycle by fully utilizing the cycle bandwidth. Only one packet movement was usually assumed in typical MINs. we present an analytical model for the MNs with the multiple packet movement scheme, and validate it by computer simulation. Comparisons with the traditional MINs of single packet movement reveal that the throughput is increased up to about 30% for practical size MINs. Similar result was also obtained for delays. The performance increase is more significant when the network traffic is nonuniform.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.11
• /
• pp.1-11
• /
• 2002

To increase network survivability and to guarantee reliable services in MPLS networks, when failures occur either at any link or node of a working path, traffics on the failed path should be switched to other restoration paths. In this paper, we propose a path restoration method using duplication of working paths for link failure and its associated failure detection method, which utilizes OAM cells when all the duplicated links or nodes of the path failed. We analyze the performance of the proposed restoration method and show that especially the method is very efficient to restore high priority traffics. Also, through simulation we prove that the proposed restoration method is superior in performance to several existing methods suggested so far.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.927-932
• /
• 2005

We investigate the effects on performance of using a partial retransmission mechanism in Optical Burst Switched(OBS) networks. In our scheme, the lost segments of a burst are retransmitted in the OBS layer. We also propose an optical resource reservation using the partial retransmission mechanism. Our scheme attempts to improve the burst contention resolution and optical channel utilization. The performance of the proposed mechanism is analyzed by NS2 simulations. Simulation results indicate that link utilization of the OBS network is improved makedly at the expense of signaling and ingress buffers.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.30-37
• /
• 2012

Pneumatic Active Engine Mount(PAEM) with open-loop control system has been developed to reduce the transmission of the idle-shake vibration induced by engine effectively and economically. A solenoid valve installed between PAEM and vacuum tank is on-off switched by the Pulse Width Modulate(PWM) control signal to decrease the dynamic stiffness of the engine mount. This paper presents the methodology to identify the optimal values of control parameters of a PAEM, i.e, turn-on timing and duty ratio of PWM signal for 6 different idle driving conditions. A scanning algorithm was first applied to the vehicle test to obtain the approximate optimal control parameters minimizing the vibration at front seat rail and at steering wheel. Then the PAEM system identification was fulfilled to find accurate optimal control parameters by using multi-layer neural networks of Levenberg-Marquardt algorithm with vehicle test data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5B
• /
• pp.404-413
• /
• 2003

Optical Internet consists of IP domain and optical (WDM) domain, where the wavelength routing (WR) and optical burst switching (OBS) are the promising switching technologies in the optical domain. In this paper, we perform the simulations on the WR network and the OBS network, and compare their performances. It is verified from our simulations that the OBS network performs better than the WR network when the same network resources are given.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1427-1433
• /
• 2003

This paper presents the routing and wavelength and timeslot assignment problems for a circuit-switched time division multiplexed (TDM) wavelength-routed networks. In this paper, we propose an efficient distributed control protocol for establishing lightpath dynamically. The protocol uses backward reservation to reduce the chance of blocking. We use aggressive reservation method with usable multiple channels and select only one in multiple channel. We show through simulation that the proposed protocol improves the success rate in TDM-based lightpath establishment and the proposed aggressive reservation method improve blocking probability with appropriate reservation channel count.