• 제목/요약/키워드: switch control

검색결과 1,253건 처리시간 0.024초

Tolerance Control for the Inner Open-Switch Faults of a T-Type Three-Level Rectifier

  • Lee, June-Seok;Lee, Kyo-Beum
    • Journal of Power Electronics
    • /
    • 제14권6호
    • /
    • pp.1157-1165
    • /
    • 2014
  • The T-type topology is a three-level topology that has an advantage in terms of its number of switching device and its efficiency when compared to the neutral-point clamped (NPC)-type topology. With the recent increase in the usage of the T-type topology, the interest in its reliability has also increased. Therefore, a tolerance control for a T-type rectifier is necessary to improve the reliability of applications when an open-switch fault occurs. NPC-type rectifiers cannot eliminate input current distortion completely. However, the T-type rectifier is able to restore distorted current. In this paper, a tolerance control for the $S_{x2}$ and $S_{x3}$ open-switch faults of a T-type rectifier is proposed where it is advantageous in terms of efficiency when compared with other tolerance controls. The performance of the proposed tolerance control is verified through simulation and experimental results.

Fault-Tolerant Strategy to Control a Reverse Matrix Converter for Open-Switch Faults in the Rectifier Stage

  • Lee, Eunsil;Lee, Kyo-Beum
    • Journal of Power Electronics
    • /
    • 제16권1호
    • /
    • pp.57-65
    • /
    • 2016
  • Reverse matrix converters, which can step up voltages, are suitable for applications with source voltages that are lower than load voltages, such as generator systems. Reverse matrix converter topologies are advantageous because they do not require additional components to conventional matrix converters. In this paper, a detection method and a post-fault modulation strategy to operate a converter as close as possible to its desired normal operation under the open-switch fault condition in the rectifier stage are proposed. An open-switch fault in the rectifier stage of a reverse matrix converter causes current distortions and voltage ripples in the system. Therefore, fault-tolerant control for open-switch faults is required to improve the reliability of a system. The proposed strategy determines the appropriate switching stages from among the remaining healthy switches of the converter. This is done based on reference currents or voltages. The performance of the proposed strategy is experimentally verified.

광스위치 개발 (Development of opto-mechanical switch)

  • 박갑석;최신호;장은상;김성일;이병욱
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 G
    • /
    • pp.2464-2466
    • /
    • 1998
  • A switch is a component with two or more ports that selectively transmits, redirects, or blocks optical power in a fiber transmission line. Our switch uses rotation mechanism using stepping motor, hence the common optical fiber can scan and allign to one of the arrayed N optical fibers to provide optical path by electronic precise control. The developed switch is consisted of switching module and its control module. The performance parameters of a switching loss and a repeatability are considered very important. We performed the study to reduce the switching loss and improve the repeatability of switch. The switch can be widely used as a test instrument of optical device and of optical cable in factory, also of optical cable monitoring systems.

  • PDF

TDX-1스윗칭 네트워크의 통화량

  • 오돈성;박권철
    • 한국통신학회:학술대회논문집
    • /
    • 한국통신학회 1986년도 춘계학술발표회 논문집
    • /
    • pp.142-145
    • /
    • 1986
  • The traffic characteristics of digital switch network depend on the structure, blocking probability, path searching method and etc. This paper presents the study of TDX-1 switch network traffic capacity by considering some decisive factors such as call processing software, switch network structure and control scheme. Conclusively the study shows that the switch network of TDX-1 can handle approximatly up to 1650 Erlang.

  • PDF

일체형원자로 SMART의 제어봉 위치지시기 개발 (Development of Position Indicator for System-Integrated Reactor SMART)

  • 유제용;김지호;허형;김종인;장문희
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집D
    • /
    • pp.921-926
    • /
    • 2001
  • The reliability and accuracy of the information on control rod position are very important to the reactor safety and the design of the core protection system. In this study, a thorough investigation on the RSPT(Reed Switch Position Transmitter) type control rod position indication system and its actual implementation in the exiting nuclear power plants in Korea was performed first. A design of the control rod position indication system using reed switch for the CEDM on the system-integrated reactor SMART was developed based on the position indicator technology identified through the investigation. The feasibility of the design was evaluated by test of manufactured control rod position indicator using reed switch for SMART.

  • PDF

3상 SRM 구동용 4-스위치 인버터 PWM 제어 알고리즘 (Control Algorithm for 4-Switch Inverter of 3-Phase SRM)

  • 윤용호;이병국;원충연
    • 전기학회논문지P
    • /
    • 제58권3호
    • /
    • pp.303-309
    • /
    • 2009
  • Switched Reluctance Motor(SRM) has become popular for industrial application, particularly for low medium drives due to the advantages of SRM over the other ac motors: SRM can be manufactured with low cost because it has a simple structure. But, asymmetric bridge converter that generally is used for driving requires two discrete switching devices and freewheeling diodes per phase, and cause the SRM drives to be complicated and to increase the cost of overall system. Therefore, this paper suggests a new type of 4-switch converter for SRM. 4-switch converter topology is studied to provide a possibility for the realization of low cost 3-phase SRM drive system. For effective utilization of the developed system, a new current control algorithm is designed and implemented to produce the desired dynamic performance. With the developed power conversion circuit and control scheme, it is expected that the proposed system can be widely used in commercial applications with reduced system cost.

주 스위치의 전도손실을 최소화한 ZVT 부스터 컨버터 (ZVT boost converter with minimizing conduction losses of the main switch)

  • 진기호;강안종;김태우;김학성
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 추계학술대회 논문집
    • /
    • pp.95-98
    • /
    • 2003
  • A ZVT PWM Boost Converter is proposed to reduce current stresses and conduction losses of main switch in a conventional circuit. By attaching resonant inductor Lr1 in parallel with capacitor Cr, the resonant circulating current is diverted to the additional component and then the main switch is subjected to minimum current stresses same as those in their PWM counterparts. Moreover, the operation of the auxiliary switch in a half wave mode to prevent reverse resonant energy from freewheeling can be able to lessen the conduction losses. The operation principles of the proposed converters are analyzed using the PWM boost converter topology as an example. Theoretically analysis and experimental results verify the validity of the boost converter topology with the proposed circuit.

  • PDF

ZC-ZVS PWM 승압형 컨버터에 관한 연구 (A Study of ZC-ZVS PWM Boost Converter)

  • 김태우;정효근;안희욱;김학성
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 전력전자학술대회 논문집
    • /
    • pp.211-214
    • /
    • 2001
  • This paper introduces a ZC-ZVS PWM(Pulse-Width -Modulation) boost converter. The IGBT(main switch) of the proposed converter is always switched at ZCS and soft switching of MOSFET(auxiliary switch) as well. Therefore, the proposed converter minimized the turn on/turn off switching losses of switches and reduced conduction losses by using IGBT switch. Moreover, using paralleled IGBT-MOSFET switch overcame the switching frequency limitation. Therefore high power density system can be realized. As mentioned above, the characteristics are verified through experimental results.

  • PDF

도시형 자기부상열차 시저스분기기 개발현황과 성능시험결과 (Development and Performance Test Results of a Segmented Scissors Type Switch for the Urban Maglev)

  • 이종민;박도영;한형석;김창현
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.3180-3186
    • /
    • 2011
  • A segmented scissors type switch has been developed for the urban transit maglev demonstration line to be commercialized near Incheon International Airport in 2013. Based on the design of the previous segmented 3-way switch, the scissors switch is composed of four segmented 2-way switches up/down and left/right and a turn table in the mid point. The main function of the scissors switch is to change the running direction of the train at end terminals. The developed scissors switch is planned to be installed in front of the 102 station, which has a side platform, of the demonstration line. The total length of the switch is 65m and the distance between the up and down track centerlines is 6m. The 2-way switches and turn table are made of steel box type beams, and have their own driving unit, locking unit, control unit, levitation and propulsion rails, and so on. Installed in the factory, a 100,000-cycle continuous operation test was carried out after manual and automatic test operations. The applicapability of the developed switch was verified through the measurements of the linearity of the track after repetitive operations, the mechanical operation noise, the load of the main driving motor, the safety of the control panel, the natural frequency of the girder, the deformation of the girder, and so on.

  • PDF

풋 스위치용 USB 모듈 설계 및 구현 (Design and Implementation of USB Module for Foot Switch)

  • 이종혁
    • 한국정보통신학회논문지
    • /
    • 제14권8호
    • /
    • pp.1849-1854
    • /
    • 2010
  • 디지털 병원이 지향하고 있는 병원내의 정보화 시스템으로는 영상저장 및 전송시스템을 비롯한 여러 시스템들이 있다. 영상저장 및 전송시스템은 병원 내에서 발생하는 각종 의료영상을 저장하고 전송하는 시스템이며, 시술 중 필요한 각종 의료영상은 키보드나 풋 스위치를 이용하여 캡쳐한다.본 연구에서는 메인 풋 스위치 케이스 내에 탐재 가능한 풋 스위치용 USB 모듈을 MicroController가 내장된 USB지원 MCU 관련 회로와 최대 5개 풋 스위치를 위한 I/O 인터페이스 부분 등으로 설계 구현하고, 다양한 기능을 제공하는 풋 스위치 제어 프로그램을 개발하였다. 개발한 풋 스위치 USB 모듈을 병원 현장에 적용한 결과 안정적으로 동작함을 확인할 수 있었다.