• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.39-43
• /
• 2007

In high speed communication networks, the determination of a transmission rate is critical for the stability of a closed-loop network system with the congestion control scheme. In ATM networks, the available bit rate (ABR) service is based on a feedback mechanism, i.e., the network status is transferred to the ABR source by a resource management (RM) cell. RM cells contain the traffic information of the downstream nodes for the traffic rate control. However, the traffic status of the downstream nodes can not be directly transferred to the source node in the IP based networks. In this paper, a new rate-based congestion control scheme using an exponential weighted moving average algorithm is proposed to build an efficient feedback control law for congestion avoidance in high speed communication networks. The proposed congestion control scheme assures the stability of switch buffers and higher link utilization of the network. Moreover, we note that the proposed congestion scheme can flexibly work along with the increasing number of input sources in the network, which results in an improved scalability.

• KSBB Journal
• /
• v.28 no.4
• /
• pp.230-237
• /
• 2013

Amyloid ${\beta}$ peptide (A${\beta}$) still best known as a molecule to cause Alzheimer's disease (AD). AD is characterized by the accumulation and deposition of A${\beta}$ within the brain, leading to neuronal cell loss and perturbation of synaptic function by causing free radical formation, inflammation and apoptosis. We investigated the inflammatory action of A${\beta}$ on two types of brain cells, neuronal cells (SH-SY5Y) and neuroglia cells (C6), and its mechanism. We measured the production of NO-iNOS, TNF-${\alpha}$, and ICAM-1 using RT-PCR and Western blot analysis less than the concentration of cytotoxic effects (> 70% survivability). A${\beta}$ had no effect on the production of NO and TNF-${\alpha}$, but significantly increases of iNOS and ICAM-1. Based on this, we suggest that the inflammatory effect of A${\beta}$ results from the action of ICAM-1 in neuronal cells, rather than the release of inflammatory mediators such as NO and TNF-${\alpha}$ in neuroglia cells. In addition, we confirmed whether p53 was related to the action of A${\beta}$ by using SH-SY5Y ($p53^{-/-}$) dominant cells. Neither the expression of p53 nor the cytotoxicity of SH-SY5Y ($p53^{-/-}$) cells were directly affected by A${\beta}$. However, ICAM-1 was not expressed in SH-SY5Y ($p53^{-/-}$) cells. This means that p53- independent pathway exists in the expression of ICAM-1 by A${\beta}$ while p53 plays a role as an on-and-off switch.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.2
• /
• pp.101-114
• /
• 2002

The real multimedia application in wide area communication needs the guaranteed performance of communication service. Therefore, the resource is reserved at the moment of traffic burst and the region of connection admission possibility is widened at the basis of maximum cell rate. This of study shows that the end-to-end traffic delay to the traffic of burst state is guaranteed when the total of maximum transmission rate is higher than link speed by using the region of deterministic delay. The network load rate of connection admission can be improved by the inducement of delay bounds consideration each traffic characteristic to guarantee the end-to-end delay of network from single switch. This suggested buffering system using deterministic service do not give any influence to service quality and can guarantee the bounds of end-to-end delay. And it can also reduce the load of network even if the delay is increased according to the burst traffic characteristic. The above suggested system can be applied effectively to the various kinds of general network specification which admit both real time trafnc service and non-real time traffic service.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.4
• /
• pp.25-32
• /
• 2001

A microwave vacuum (MW/V) dryer was developed for drying short roundwoods, from which woodcraft souvenirs in Korean market are mostly made, and which were hardly dried without defects in a conventional kiln. It consisted of three 1.5 kW magnetrons of 2,450 MHz, a vacuum pump, a load cell of 100 kg and a cavity of $580{\times}580{\times}1,360\;mm^3$. A computer program was developed to switch on or off the magnetrons according to drying schedules, those were based on microwave injection time or the average of wood temperatures. To evaluate the new MW/V dryer the roundwood specimens of rigida pine, poplar and birch were dried. Their log diameters and lengths ranged from 125 to 25 em and from 25 to 50 cm, respectively. In spite of the presence of minor drying defects, the MW/V drying is found to be an effective method for drying short roundwoods. Wooden turneries made of red alder and ash logs were also MW/V dried from green to 4%MC without any degradation. The rates of the MW/V drying were examined for three different lengths of poplar logs.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.319-323
• /
• 2011

In this paper presents a new model of dual-mode synchronous buck converter with dynamic control for mobile applications was proposed. The proposed circuit can operate at 2.5MHz with supply voltage 2.5V to 5V for low ripple and minimum inductor and capacitor size, which is suitable for single-cell lithium-ion battery supply mobile applications. For high efficiency, the proposed circuit adopts synchronous type and dynamic control. The proposed circuit is designed by using the device parameter of TSMC 0.18um BCD process and the performance is evaluated by Cadence spectre. Experimental board level results show the maximum conversion efficiency is 96% at 100mA load current.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.569-580
• /
• 2003

One of the important advantages of multichannel switches is the incorporation of inherent fault tolerance into the switching fabric. For example, if a link which belongs to the multichannel group fails, the remaining links can assume responsibility for some of the traffic on the failed link. On the other hand, if faults occur in the switching elements, it can lead to erroneous routing and sequencing in the multichannel switch. We investigate several fault localization algorithms in multichannel crossbar ATM switches with a view to early fault recovery, The optimal algorithm gives the best performance in terms of time to localization but is computationally complex which makes it difficult to implement. We develop an on-line algorithm which is computationally mote efficient than the optimal algorithm. We evaluate its performance through simulation. The simulation results show that performance of the on line algorithm is only slightly sub-optimal for both random and bursty traffic. Finally a fault recovery algorithm is described which utilizes the information provided by the fault localization algorithm.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.3B no.3
• /
• pp.147-154
• /
• 2003

This paper presents a high-frequency boost type ZVS-PWM chopper-fed DC-DC power converter with a single active auxiliary edge-resonant snubber at the load stage which can be designed for power conditioners such as solar photovoltaic generation, fuel cell generation, battery and super capacitor energy storages. Its principle operation in steady-state is described in addition to a prototype setup. The experimental results of boost type ZVS-PWM chopper proposed here, are evaluated and verified with a practical design model in terms of its switching voltage and current waveforms, the switching v-i trajectory and the temperature performance of IGBT module, the actual power conversion efficiency, and the EMI of radiated and conducted emissions, and then discussed and compared with the hard switching scheme from an experimental point of view. Finally, this paper proposes a practical method to suppress parasitic oscillation due to the active auxiliary resonant switch at ZCS turn-off mode transition with the aid of an additional lossless clamping diode loop, and can be reduced the EMI conducted emission.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.632-636
• /
• 2006

It is needed to use the beam scanning to control the cell coverage of the base station considering operation conditions, season, time period, radiation character and mobility of customers and vehicles for varied wireless communication service and quality improvement. This paper proposes a mobile antenna system which can obtain the characteristics of the beam scanning by controlling the directivity depending on the operation condition. Radiation block is made of 2 sub-array of $1\times3$ patched antennas for ITS of 5.8GHZ bandwidth with the gain of 13dBi, and of 2 sub-array of single patched antenna for WiBro of 2.3GHZ bandwidth with the gain of 12dBi. RF module is made of a switch, an amplifier, a PAD, a 3-Bit phase shifter, and a power divider. The system is able to control the beam tilting with electronic methode by using 3-bit phase shifter$(45^{\circ},\;90^{\circ},\;180^{\circ})$.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.82-89
• /
• 2021

This study proposes a DAB two-stage series structure with insulated bidirectional DC-DC converter for two-way power transfer between the renewable energy of high voltages (1 kV and above). The proposed circuit transforms the existing DAB converter into a two-stage series structure to reduce the pressure in the switch. The problem of power imbalance occurring in the design of the DAB converter second-stage series is improved by applying the cell balancing method circuit and the common mode coupled inductor using an external flying capacitor instead of reflecting the existing improvement measures, voltage balance control, and inductor current control. In addition, a no-load supercharging sequence is proposed in high voltages and high-speed switching by using the fixed duty output method. This study presents the analysis results through the structure of the proposed circuit, the principle of improving the power imbalance problem, and simulations. Prototypes were manufactured to meet the specifications of input/output voltage of 1700 V, maximum load of 65 kW, and switching frequency of 51kHz, and the validity of the topology was verified using the experimental results and efficiency data.

• Archives of Craniofacial Surgery
• /
• v.19 no.4
• /
• pp.254-259
• /
• 2018

Background: The esthetic and functional outcomes of periorbital defect reconstruction are very important because of the complex anatomy and specialized functions of this region. The orbicularis oculi myocutaneous (OOMC) flap is useful for the reconstruction of periorbital defects. But, according to the location and depth of the defects, the reconstruction using OMC flaps with various techniques is rare. The authors have used various kinds of OOMC flaps in various situations and we present an analysis of our experiences. Methods: From November 2001 to July 2017, we used 36 OOMC flaps to reconstruct 30 periorbital defects in 25 patients. We analyzed the cause of the defect, its location, the type of concomitant surgery, the method of flap movement, and complications. Results: Of the 30 defects, basal cell carcinoma was the most common cause, accounting for 20 cases. When the used OOMC flap was classified according to the location of the defects, the switch flap was used in nine cases among 15 defects of lower eyelid, and the V-Y advancement flap was mainly used for other parts. As surgical methods according to the depth of defect were classified, all cases involving the tarsal plate were reconstructed with a composite graft. In case of skin and muscles, they were reconstructed only with OOMC flap or with full-thickness skin graft. Conclusion: The OOMC flap provides good skin quality that is very similar to that of the defect tissue. Depending on the location and depth of the defect, the OOMC flap may be used properly in a variety of ways to achieve good results.