• Title/Summary/Keyword: swelling test

Search Result 387, Processing Time 0.033 seconds

Physicochemical Properties of Citrus Hallabong Granules (한라봉 감귤 과립의 물리화학적 특성)

  • Lee, Chung-Woo;Kim, Mi-Bo;Oh, Young-Ju;Lim, Sang-Bin
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.43 no.4
    • /
    • pp.537-543
    • /
    • 2014
  • Three different granule powders of Citrus Hallabong were prepared with different ratios of fresh juice and citric acid (J10C3=10.0:3.08, J08C4=8.75:4.33, J07C5=7.5:5.58) at fixed quantities of juice powder (70%), pressed cake powder (10%), and additives (6.92%), and their physicochemical properties were measured and compared with targeted commercial product (CP). The moisture content of Hallabong granules (HG) was 5.08~5.44% (w/w), which was two times higher than that of CP. Titratable acidities increased with higher citric acid content and were 1.7~2.3 times lower in HG compared to that of CP. Soluble solids of HG increased with higher citrus juice content ($90{\sim}98^{\circ}Brix$) and were slightly lower than that of CP. Vitamin C contents of HG increased with higher citrus juice content and were 5.8~7.6 times lower than that of CP. In terms of color difference, L and b values of HG were higher while a value was lower than those of CP. Bulk and compaction densities of HG were 0.541~0.660 g/mL and 0.561~0.689 g/mL, respectively and were similar to those of CP. Water solubility and swelling capacity were 66.6~72.0% and 3.84~6.40 g/g, respectively, and were similar to those of CP. Hygroscopicity of HG after an hour of elapsed time was 1.6~1.8 times higher than that of CP. Sensory evaluation test showed that color, sweetness, and overall acceptance of HG were not significantly different from those of CP, whereas flavor and bitterness of HG were lower than those of CP. In conclusion, convenient food granules could be made with Citrus Hallabong juice and pressed cake, which is similar to the commercial product.

Coupled T-H-M Processes Calculations in KENTEX Facility Used for Validation Test of a HLW Disposal System (고준위 방사성 폐기물 처분 시스템 실증 실험용 KENTEX 장치에서의 열-수리-역학 연동현상 해석)

  • Park Jeong-Hwa;Lee Jae-Owan;Kwon Sang-Ki;Cho Won-Jin
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.4 no.2
    • /
    • pp.117-131
    • /
    • 2006
  • A coupled T-H-M(Thermo-Hydro-Mechanical) analysis was carried out for KENTEX (KAERI Engineering-scale T-H-M Experiment for Engineered Barrier System), which is a facility for validating the coupled T-H-M behavior in the engineered barrier system of the Korean reference HLW(high-level waste) disposal system. The changes of temperature, water saturation, and stress were estimated based on the coupled T-H-M analysis, and the influence of the types of mechanical constitutive material laws was investigated by using elastic model, poroelastic model, and poroelastic-plastic model. The analysis was done using ABAQUS, which is a commercial finite element code for general purposes. From the analysis, it was observed that the temperature in the bentonite increased sharply for a couple of days after heating the heater and then slowly increased to a constant value. The temperatures at all locations were nearly at a steady state after about 37.5 days. In the steady state, the temperature was maintained at $90^{\circ}C$ at the interface between the heater and the bentonite and at about $70^{\circ}C$ at the interface between the bentonite and the confining cylinder. The variation of the water saturation with time in bentonite was almost same independent of the material laws used in the coupled T-H-M processes. By comparing the saturation change of T-H-M and that of H-M(Hydro-Mechanical) processes using elastic and poroelastic material mod31 respectively, it was found that the degree of saturation near the heater from T-H-M calculation was higher than that from the coupled H-M calculation mainly because of the thermal flux, which seemed to speed up the saturation. The stresses in three cases with different material laws were increased with time. By comparing the stress change in H-M calculation using poroelasetic and poroelasetic-plastic model, it was possible to conclude that the influence of saturation on the stress change is higher than the influence of temperature. It is, therefore, recommended to use a material law, which can model the elastic-plastic behavior of buffer, since the coupled T-H-M processes in buffer is affected by the variation of void ratio, thermal expansion, as well as swelling pressure.

  • PDF

A Study of Removal Property of Harmful Algal Blooms by Hwangto and Oriental Mineral Medicines (황토와 광물성 한약재의 적조구제 특성에 관한 연구)

  • Kim, Pil-Geun;Sung, Kyu-Youl;Jang, Young-Nam;Park, Maeng-Eon
    • Journal of the Mineralogical Society of Korea
    • /
    • v.19 no.4 s.50
    • /
    • pp.277-289
    • /
    • 2006
  • This study was carried out to find a new material having high removal efficiency for the harmful red tide. C. polykrikoides grow very fast and accumulate into dense and visible patches near the surface of the seawater ('Water bloom'). Some mineral medicines and Hwangto (reddish soil consist of clay minerals and Fe-oxides) were used in this study to remove C. polykrikoides. The pre-determined sprinkling ratio of mineral vs. seawater which contains approximately 5,000 cells/mL of C. polykrikoides was 10 g/L. In order to quantify the removal efficiency, the density of living cells was measured by counting with the Intervals of 0, 10, 30, and 60 minutes after sprinkling. Five Hwangtos feom different localities were examined in this study. It is found that a material with a high concentration of Fe and Al was the most effective to remove C. polykrikoides. After the sprinkling of the Hwangto showing the best removal efficiency in the test, 99% of total algaes were found to be eliminated within 60 minutes. Jeokeokji showed the highest removal efficiency among clay mineral medicines(92% removal efficiency after 60 minutes), and the rests in decreasing order are as follows: Gamto (91%) > Baekseokji (89%) > Hydromica (81%). In addition, Fe-oxide mineral medicine similarly looking as fine-grained earthy Daejaseok showed 100% removal efficiencyafter 30 minutes, and Wooyoeryang, 95% after 60 minutes. It is noted that even little addition (1 g/L) of Daejaseok, 10% of Hwangto concentration into seawater showed the removal efficiency of 100% after 60 minutes. From the results, it could be concluded that the fine-grained earthy Daejaseok was the most effective natural mineral medicine to remove the C. polykrikoides from seawater. Under the microscope the removal mechanism was found to be activated in the following order: adsorption, swelling of chain colony, chain colony crisis and algaecide.

Studies on Anisakis Type Larvae (Anisakis 형(型) 유충(幼蟲)에 관한 연구(硏究))

  • Lim, Jung Teck
    • Korean Journal of Veterinary Research
    • /
    • v.15 no.2
    • /
    • pp.293-307
    • /
    • 1975
  • As it has been known recently that anisakis type larvae harbouring in marine fishes are a causal agent of zoonosis to human and probably to land living mammal animals, attention was focused on the study on the larvae in an aspect of epidemiology or epizootiology. The present work was conducted from 1966 to 1975 for i) survey on the harbouring status of anisakis type larvae in marine fishes of this country, ii) observation on the response to the experimental infestation of the larvae to the pigs, in the reason that they could well fetid raw fish viscera occasionally containing the larvae as a high protein source of swine food, and iii) observation on the larval resistance and response to vermicidal agents for the purpose of prevention of the larval infection to the mammal animals. The data obtained in the studies were summarized as follows: 1. In the survey on the status of larvae harbouring in main species of marine fishes of this country, 15 species, a total of 1,940 fishes, were observed and the result was summarized in table 2. Average number of larvae, in upper rank of 5 out of all 15 species of fishes, were as highest as 156 larvae ranging 74 to 450 in Pseudosciaena manchurica (chamjogi), 54.5 ranging 15 to 240 in Trichiurus haumela (kalchi), 35.6 ranging 8 to 112 in Trachurus japonica (junggengi), 30.6 ranging 4 to 65 in Parapristipama trilineatum (benjari) and 20.5 ranging 3 to 48 in Nibea argentata (boguchi) respectively. In morphological observation, size of the larvae in the fishes were varied, ranging from 2 to 32mm long, and a tendency to larger size and number of larvae in the fishes, which were wider sea migration, higher age and lager bodily size, was observed The favorite places harbouring the larvae in fishes were mainly around the intraperitoneal viscera such as mesentery, omentum, liver, pyloric suspensory, fat tissue and cloaca, and rarely in body muscles of fish. Fishes heartily infested with the larvae showed stunted growth decreased egg formation and severe damage of liver. 2. In the experimental infestation of the larvae to normal pigs, as illustrated in table 3, a group with large dose of larvae (a total of 1,800 larvae, 300 larvae Per dose, twice in a dart for 3 days) showed acute clinical syndrome terminatine death with a week course, whereas two groups with less dose of larvae (a total of 180~360 larvae, 10 larvae per dose, at 5 days interval for 70~180 days) showed subclinical syndrome with remarkably stunted growth as. much as approximately one half of body size in contest to the control pigs. In the pathological findings, a group with large dose of larvae showed macroscopically larvae penetrating to the gastric wall with severe gastroenteritis, and histopathologically various acute lesions caused by active larvae penetration into the wall of stomach and interstine, whereas two groups with less dose of larvae showed chronic lesions such as hypertrophy and verminous granulomatous swelling of gastric wall, suggesting strongly the possibility of natural infestation of larvae to swine. 3. In the resistance of the larvae to the chemical solutions, the larvae tolerated for 2 days in 15 percent solution of sodium chloride and acetic acid, and for 7 days in 70 percent solution of ethyl alcohol. In the resistance to the temperature, the larvae died within 1 second at $62^{\circ}C$ and tolerated for 24 hours at $-3^{\circ}C$, 12 hours $-5^{\circ}C$ respectively. 4. For the experiment on the vermicidal effect to larvae, general vermicidal drugs such as Neguvon, Combantrin, antimony Potassium, piperazine adipate and piperazine dihydrochloride, oxidizer such as potassium permanganate and potassium chlorate, and dyes such as gentian violet and crystal violet were used, and among them, as illustrated in table 6, potassium permanganate was proved as the best. In the successive test for the practical use of potassium permanganate, vermicidal effect in seawater solution of potassium permanganate and common-water solution of potassium permanganate were compared, and then retested by dipping the fish viscera including the larvae into the two different solutions of potassium permanganate. The result through these tests indicated that 0.01 percent common water and sea-water solution of potassium permanganate could be apparently recommended as a preventive vermicidal solution, having 90 to 100 percent vermicidal effect by dipping for 12 to 24 hours even though sea-water solution of potassium permanganate had a tendency to slightly less effect than the common-water solution of potassium permanganate (Table 8).

  • PDF

Physicohemical Properties of Extruded Rice Flours and a Wheat Flour Substitute for Cookie Application (압출쌀가루의 이화학적 특성 및 밀가루 대체 쿠키 특성)

  • We, Gyoung Jin;Lee, Inae;Kang, Tae-Young;Min, Joo-Hong;Kang, Wie-Soo;Ko, Sanghoon
    • Food Engineering Progress
    • /
    • v.15 no.4
    • /
    • pp.404-412
    • /
    • 2011
  • The purpose of this study is to prepare extruded rice flours suitable for baking rice cookies. The extruded rice flours were prepared at 100 and 130$^{\circ}C$ temperature and 25 and 27% moisture content in a co-rotating twin screw extruder. The rice extrudates were dried at 100$^{\circ}C$ for 18 hr and subsequently ground into the fine flour. Characteristics of the extruded rice flours were examined by rapid visco analysis, hydration property analysis, differential scanning calorimetry (DSC), and in vitro digestion test. Water absorption, solubility, and swelling power of all extruded rice flours were higher than those of native rice flour. DSC analysis showed that native rice flour had a peak at about 65$^{\circ}C$ while all extruded rice flours did not show any peaks since they were already gelatinized during the extrusion proess. Viscosity of the extruded rice flours decreased with increasing temperature and lowering moisture content in the extrusion proess. The extruded rice flours prepared at 130$^{\circ}C$ exhibited lower viscosity than those prepared at 100$^{\circ}C$. The operating temperature of the extrusion proess was critical for the starch digestion in vitro. The extruded rice flours prepared at 130$^{\circ}C$ showed a rapid decrease in digestible starch content while an increased level of slowly digestible starch content was observed compared to those treated at 100$^{\circ}C$ in the extruder. Cookies were prepared with a mixture of wheat flour and extruded rice flours at the ratio of 7 to 3. The cookies made with the extruded rice flours had lower spread factor and darker yellow color than those prepared with wheat flour only. Hardness of the extruded rice flour-added cookies was similar to that of the wheat flour cookie whereas their overall acceptance was better. Therefore the rice cookies partially supplemented with extruded rice flours may have a potential as early childhood foods which require soft texture and allergy reduction.

Effect of Cardanol Content on the Antibacterial Films Derived from Alginate-PVA Blended Matrix (알지네이트-폴리비닐알콜 블랜드 항균 필름 제조를 위한 카다놀 함량의 영향)

  • Ahn, Hee Ju;Kang, Kyung Soo;Song, Yun Ha;Lee, Da Hae;Kim, Mun Ho;Lee, Jae Kyoung;Woo, Hee Chul
    • Clean Technology
    • /
    • v.28 no.1
    • /
    • pp.24-31
    • /
    • 2022
  • Petroleum-based plastics are used for various purposes and pose a significant threat to the earth's environment and ecosystem. Many efforts have been taken globally in different areas to find alternatives. As part of these efforts, this study manufactured alginate-based polyvinyl alcohol (PVA) blended films by casting from an aqueous solution prepared by mixing 10 wt% petroleum-based PVA with biodegradable, marine biomass-derived alginate. Glutaraldehyde was used as a cross-linking agent, and cardanol, an alkyl phenol-based bio-oil extracted from cashew nut shell, was added in the range of 0.1 to 2.0 wt% to grant antibacterial activity to the films. FTIR and TGA were performed to characterize the manufactured blended films, and the tensile strength, degree of swelling, and antibacterial activity were measured. Results obtained from the FTIR, TGA, and tensile strength test showed that alginate, the main component, was well distributed in the PVA by forming a matrix phase. The brittleness of alginate, a known weakness as a single component, and the low thermal durability of PVA were improved by cross-linking and hydrogen bonding of the functional groups between alginate and PVA. Addition of cardanol to the alginate-based PVA blend significantly improved the antibacterial activity against S. aureus and E. coli. The antibacterial performance was excellent with a death rate of 98% or higher for S. aureus and about 70% for E. coli at a contact time of 60 minutes. The optimal antibacterial activity of the alginate-PVA blended films was found with a cardanol content range between 0.1 to 0.5 wt%. These results show that cardanol-containing alginate-PVA blended films are suitable for use as various antibacterial materials, including as food packaging.

Correlations between the Capacity of In Vitro Fertilization and the Assays of Sperm Function and Characteristics in Frozen-thawed Bovine Spermatozoa (소 동결-융해 정자에 있어서 체외수정능력과 정자 기능 및 성상 분석법간의 상관관계)

  • Ryu, B.Y.;Chung, Y.C.;Kim, C.K.;Shin, H.A.;Han, J.H.;Kim, S.H.;Moon, S.Y.;Kim, H.R.;Choi, H.
    • Korean Journal of Animal Reproduction
    • /
    • v.26 no.3
    • /
    • pp.275-289
    • /
    • 2002
  • The objective of this study was to develop an in vitro assessment of sperm fertilizing capacity of bulls and investigate the factors influencing sperm function and characteristics of frozen-thawed bovine spermatozoa. in vitro fertilization (IVF), the evaluation of motility and normal morphology, HOST (hypoosmotic swelling test), Ca-ionophore induced acrosome reaction, luminol and lucigenin-dependent chemiluminescence for the measurement of reactive oxygen species (ROS), the measurement of malondialdehyde formation for the analysis of lipid peroxidation (LPO), and the evaluation of DNA fragmentation using the method of 747-mediated nick end labelling (TUNEL) by flow cytometry were performed in frozen-thawed bovine spermatozoa. Correlations between the rates of fertilization, blastocyst formation after IVF and the values of respective assays were investigated. 1. IVF rate and blastocyst formation rate averaged 64.4% and 34.3% for spermatozoa from high -fertility bull group and averaged 18.5% and 6.2% for spermatozoa from low-fertility bull group, respectively. There were significantly different between two bull groups. Sperm motility and percentage acrosome reaction averaged 79.0% and 66.2% for spermatozoa from high-fertility bull group and averaged 40.7% and 22.9% for spermatozoa from low-fertility bull group, respectivitely. There were not different between two bull groups. 2. Luminol depenent chemiluminescence, LPO and DNA fragementation averaged 6.4, 2.0 nmol and 2.6% from spermatozoa from high-fertility bull group and averaged 6.5, 3.1 nmol and 7.4% for spermatozoa from low-fertility bull group, respectively. There were significantly different between two bull groups. There was no significant difference in lucigenin dependent chemiluminescence between two bull groups. 3. Fertilization rate was positively correlated with motility and the rate of Ca-ionophore induced acrosome reaction, but negatively correlated with the frequency of luminol-dependent chemiluminescence, the rate of LPO, and the percentage of sperm with DNA fragmentation. There was no correlation between fertilization rate and the percentage of swollen spermatozoa, normal morphology, and the frequency of lucigenin-dependent chemiluminescence. 4. Blastocyst formation rate was positively correlated with the rate of Ca-ionophore induced acrosome reaction, but negatively correlated with the frequency of luminol-dependent chemiluminescence, the rate of LPO, and the percentage of sperm with DNA fragmentation. There was no correlation between blastocyst formation rate and motility, the percentage of swollen spermatozoa, normal morphology, and the frequency of lucigenin-dependent chemiluminescence. In conclusion, these data suggest that ROS significantly impact semen quality. The assays of this study may provide a basis fur improving in vitro assessment of sperm fertilizing capacity.