• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.330-338
• /
• 2016

The U-Zr or U-TRU-Zr cylindrical metallic fuel slug used in fast reactors is known to swell significantly and to grow during irradiation. In neutronics simulations of metallic-fueled fast reactors, it is assumed that the slug has swollen and contacted cladding, and the bonding sodium has been removed from the fuel region. In this research, a realistic burnup-dependent fuel-swelling simulation was performed using Monte Carlo code McCARD for a single-batch compact sodium-cooled breed-and-burn reactor by considering the fuel-swelling behavior reported from the irradiation test results in EBR-II. The impacts of the realistic burnup-dependent fuel swelling are identified in terms of the reactor neutronics performance, such as core lifetime, conversion ratio, axial power distribution, and local burnup distributions. It was found that axial fuel growth significantly deteriorated the neutron economy of a breed-and-burn reactor and consequently impaired its neutronics performance. The bonding sodium also impaired neutron economy, because it stayed longer in the blanket region until the fuel slug reached 2% burnup.

• Journal of Sericultural and Entomological Science
• /
• v.14 no.2
• /
• pp.105-112
• /
• 1972

The effects of the stretching speed and the swelling degree of cocoon filaments on load-elongation curve were tested by tensilon with special attachments. The values of breaking strength, elongation at break and initial tensile strength obtained from load elongation curves are summarized as follows; 1. The breaking strength of the swollen cocoon filament appeared to increase at the high stretching speed, while elongation at break decreased. 2. Load-elongation curve became crinkled at the low speed of stretching. It suggests that both slip and break of the macrofibrils may occur in swelling of cocoon bave. 3. Breaking strength appeared to considerably decrease and elongation at break not to increase in swelling test at 9$0^{\circ}C$ for 60 min. 4. The initial tensile strength was influenced by the stretching speed and swelling degree of cocoon filaments.

• Geotechnical Engineering
• /
• v.5 no.2
• /
• pp.57-77
• /
• 1989

This paper describes the design and construction aspects of time-dependent deformation test apparatus for slut.oiling rocks and presents the test results obtained using these apparatus. These tests are modified semi-confined swell test, swell test under uniaxial tension and swell test under biaxial stress. These apparatus measure the time.dependent deformations in three orthogonal directions of the test specimen under simplified field stress conditions. The test results obtained from these test apparatus for the last several years show that these apparatus have performed satisfactorily. The test results show that the time-dependent deformation behaviour of the Queenston shale is cross-anisotropic with higher swelling in the vertical direction (normal to bedding plane) than in horizontal direction (parallel to bedding plane) under free swell condition. The applied stress in one direction suppresses the swelling deformation in that direction as well as that in the orthogonal directions.

• Geomechanics and Engineering
• /
• v.29 no.1
• /
• pp.91-97
• /
• 2022

The cohesive non-swelling soil (CNS) cushion technology has been widely applied in the subgrade and slope improvement at expansive soil regions. However, the mechanism of the inhibition effect of the CNS layer on expansive soil (ES) has not been fully understood. We performed four outdoor model tests to further understand the inhibition effect, including different kinds of upper layer and thickness, under the unidirectional seepage condition. The swelling deformation, soil pressure, and electrical resistivity were constantly monitored during the saturation process. It is found that when a CNS layer covered the ES layer, the swelling deformation and electrical resistivity of the ES layer decreased significantly, especially the upper part. The inhibition effect of the CNS layer increases with the increase of CNS thickness. The distribution of vertical and lateral soil pressure also changed with the covering of a CNS layer. The electrical resistivity can be an effective index to describe the swelling deformation of ES layer and analyze the inhibition effect of the CNS layer. Overall, the CNS deadweight and the ion migration are the major factors that inhibit the swelling deformation of expansive soil.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.3
• /
• pp.267-273
• /
• 2000

Objectives: We have previous reported that thawed testicular sperm and sperm extracted from seminiferous tubule could achieved optimal fertilization and pregnancy in azoospermic patients. However, thawed testicular sperm did not show motility in many cases. Therefore we studied viability of immotile sperm extracted from frozen-thawed seminiferous tubule using hypo-osmotic swelling (HOS) test and eosin-Y test. Materials and Methods: After sperm extraction using for ICSI, the remained sections of seminiferous tubules were frozen with a computerized freezer. For thawing and preparation of testicular sperm, the seminiferous tubules were thawed by removing from $LN_2$ and letting them at room temperature for 10 min followed by %37^{\circ}C$ water bath for 10 min. The prepared samples were washed for free of preservation medium and sperm preparation method described previous. Sperm was suspended in 0.1 ml hypoosmotic solution. After 30 minutes, the type of distally coiled sperm were assessed. Results: In 44 cases of cryopreservation of seminiferous tubules in obstructive azoospennic patients, the fertilization rates with 2PN were 71.4% and pregnancy rates were 34.1%. The presence of motile spermatozoa on subsequent post-thaw testicular sperm remarked 15.1% and were increased to 77.3% just before ICSI. After sperm extracted from frozen-thawed seminiferous tubule, 3 hrs later in in vitro culture, the cases of presence of motile sperm, reaction of hypo-osmotic swelling test and viable sperm were 63.6% (28/44), 93.2% (41/44), and 77.3% (34/44), respectively. Conclusions: Just after post-thawed testicular sperm did not showed motility. Although motility was gained after in vitro culture, many cases showed non-motile sperm until optimal insemination time. However, HOS test showed positive reaction in non-motile sperm. Therefore, HOS test is an alternative method for the selection of viable sperm for ICSI.

• Advanced Composite Materials
• /
• v.18 no.2
• /
• pp.95-103
• /
• 2009

Composites can be designed to have special properties, and even such properties that are difficult to find in nature. We propose a simple approach to realize negative expansion upon wetting, i.e., contraction upon wetting, using swelling materials. The key parameters in one-dimensional case are investigated, and the possible configurations for two and three-dimensional cases are presented. The feasibility is demonstrated through a simple test.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.739-742
• /
• 2003

Curdlan acetate was prepared from hydrophilic curdlan by chemical modification and it was used for pH-sensitive drug delivery system. Curdlan acetate microspheres were prepared by the solvent evaporation method. The size of the curdlan acetate microspheres was below $200\;{\mu}m$. The drug loading efficiency of microspheres was approximately 58.44%. In the swelling test, curdlan acetate microspheres were showed pH-sensitive behavior. The swelling capacity of microspheres at pH 7.4 was much greater than at pH 1.4. Also, Release rate of indomethacin (IND) at pH 7.4 from curdlan acetate microspheres was faster than that at pH 1.4. A pH-sensitive drug release pattern was due to the disintegrating after swelling.

• Reproductive and Developmental Biology
• /
• v.31 no.2
• /
• pp.121-126
• /
• 2007

The objective of this study was to establish the optimal conditions for hypoosmotic swelling (HOS) test to assess the functional integrity of the membranes of boar fresh or frozen/thawed spermatozoa. When pooled semen sample was incubated for 30 min at $37^{\circ}C$ with different test solution of varied osmolarity, the highest percentage of HOS positive spermatozoa was observed in a 150 mOsmol fructose/Na-citrate solution (33.6%). Incubation time did not affect significantly the score of HOS positive spermatozoa observed in a 150 mOsmol fructose/Na-citrate solution at $37^{\circ}C$, but the osmolarity affected the score of HOS positive spermatozoa under the same condition above. Fresh semen was significantly better than frozen/thawed semen in semen parameters evaluated such as motility, viability, membrane integrity and lipid peroxidation (p<005). In the relationships of sperm parameters, motility vs viability, motility vs membrane integrity and viability vs membrane integrity were positively correlated ($0.82{\sim}0.94$) but lipid peroxidation vs other estimated factors was negatively correlated ($- 0.90{\sim}- 0.98$). Among the evaluation methods, motility vs Viability, motility vs membrane integrity and lipid peroxidation vs other estimated factors were significantly correlated (p<0.05). These results of this. study indicate that the optimal condition of HOST in boar spermatozoa is a 150 mOsmol fructose/Na-citrate solution for 30 min incubation at $37^{\circ}C$ and HOST can substitute the examination of motility, viability and lipid peroxidation.

• Restorative Dentistry and Endodontics
• /
• v.39 no.3
• /
• pp.210-214
• /
• 2014

Objectives: To investigate the prevalence of different primary reasons for endodontic referrals and the clinical symptoms of the referred cases. Materials and Methods: Clinical data of total endodontic treatment cases (1,014 teeth) including endodontic referral cases (224 teeth) between January 1, 2010 and December 31, 2012, at Kangdong Sacred Heart Hospital, were investigated retrospectively. The one major reason for referral, the clinical symptoms, and the resulting treatment procedures of referral cases were recorded. The percentages of clinical symptoms of the endodontic referral cases and the total endodontic treatment cases were compared by ${\chi}^2$ test for each symptom. Results: Persistent pain was the most frequent reason for endodontic referral (29.5%), followed by presence of gingival swelling and sinus tract (24.1%), and apical radiolucency (12.9%). Referrals in cases involving endodontic difficulties such as canal calcification, broken instruments, post, perforation, and resorption were less than 5.0%, respectively. The percentages of four major clinical symptoms of pain, apical radiolucency, previous endodontic treatment, and gingival swelling and sinus tract were significantly higher in the endodontic referral cases than those in the total endodontic cases (p = 0.001). Among the included referral cases, 72.8% were treated with nonsurgical endodontic treatment only. Teeth other than the referred teeth were diagnosed as the origin of the problem in 5.8% of the referrals. Conclusions: The high prevalence of pain, apical radiolucency, previous treatment, and gingival swelling and sinus tract in endodontic referral cases suggest that these symptoms may be what general practitioners consider to be difficult and refer to endodontists.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.9
• /
• pp.11-17
• /
• 2019

In recent years, damage and loss of life and property have been occurred frequently due to swelling waves in the East Sea. Swelling waves are not easy to predict because they are caused by various factors. In this research, we build a model for predicting the swelling waves occurrence in the East Coast of Korea using machine learning technique. We collect historical data of unloading interruption in the Pohang Port, and collect air pressure, wind speed, direction, water temperature data of the offshore Pohang Port. We select important variables for prediction, and test various machine learning prediction algorithms. As a result, tide level, water temperature, and air pressure were selected, and Random Forest model produced best performance. We confirm that Random Forest model shows best performance and it produces 88.86% of accuracy