• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.514-520
• /
• 1996

The purpose of this study was to develop the production technology of modified starch. Corn starches were gamma irradiated at 0-110 kGy and the effect of irradiation dose levels on the physicochemical properties of corn starches were investigated. Blue value linearly decreased, while alkali number and solubility markedly increased as irradiation dose levels were increased. The optical transmittance increased as applied irradiation dose levels were increased in the temperature range of $65-95^{\circ}C.$ Water binding capacity and swelling power showed maximum value at 30 and 10 kGy, respectively and they tended to decrease thereafter. Gelatinization viscosity of the gamma irradiated starch considerably decreased as compared to that of the non-irradiated starch. Irradiation at 110kGy resulted in a marked reduction of peak viscosity and cooling viscosity at $30^{\circ}C$ by 100 and 300 times, respectively. The physicochemical properties of corn starch irradiated at 30 kGy were similar to those of commercial acid-modified starch, while those of corn starch irradiated at 100 kGy were similar to those if oxidized starch.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.700-706
• /
• 2005

The objectives of this research were to analyze physicochemical properties of physically modified rice starch which was prepared by hydro-shear homogenizer and ultrasonic homogenizer. The 5:1 of water to starch ratio, 20,500 rpm of hydro-shear homogenizer, and 5 sec of pulse and 40 kHz of frequency of ultrasonic homogenizer, which were operated for 10 min. The 1/3 of size reduction of raw rice starch and gelatinized rice starch, and reduced of particle size were achieved by above processing conditions. The homogenization of raw rice starch and gelatinized rice starch were higher values of specific area, transmittance, solubility and swelling power than control. While, these had lower value of apparent viscosity than control. In raw rice starch, the gelatinization characteristics of ultrasonic homogenizer treated rice starch had some higher values of gelatinization temperature, peak temperature and enthalpy than those of control. While, those of hydro-shear homogenizer treated rice starch had similar values to those of control.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.314-314
• /
• 2022

In the production of rice flour, wet milling is a method of milling rice after soaking it in water, and it takes a lot of time and cost from milling to drying. To overcome this problem, the floury type rice was developed for dry milling and it is known to have round starch granules, low content of damaged starch after milling, and a starch structure similar to wheat. Because of its unique properties different from normal rice, it is necessary to research on processing and characteristics of floury-type rice to expand its utility in the food industry. Therefore, this study aimed to prepare the pregelatinized floury type rice (Baromi2) by autoclave and investigate their physicochemical properties. As the heat treatment time increased, the brightness decreased from 83.8 to 76.8, however, both redness and yellowness increased from 0.57 to 4.5 and from 14.58 to 21.13, respectively. Despite of same treatment time, soaking in water (10 min) before autoclaving increased the solubility and swelling power of Baromi2 over 2 times. The peak viscosity of native Baromi2 was over 2000 RVU, on the other hand, there was a significantly decrease to less than 1000 RVU of pregelatinized Baromi2. Heat treatment without immersion caused partial gelatinization of starch, resulting that some starch granules maintaining their integrity. Whereas there were no starch granules in heat treatment with soaking in water due to complete gelatinization. This study would be helpful to the suggestion of using heat-treated floury-type rice as an intermediate material in the food industry in the future.

• Korean journal of food and cookery science
• /
• v.12 no.4
• /
• pp.557-561
• /
• 1996

Physicochemical properties of nonwaxy (Dongjin byeo) and waxy (Sin-seunchal byeo) brown rice flour were investigated. The proximate composition of nonwaxy brown rice flour was 7.02% of protein, 1.14％ of ash, 3.2% of lipid and that of wfny brown rice was 7.74% of protein, 1.48% of ash,4.83% of lipid. X-ray dif- fraction patterns were A types, and relatives crystallinity of nonwaxy brown rice flour was higher than that of waxy brown rice flour. Swelling power and solubility increased with the increase of temperature, waxy brown rice flour showed higher than nonwaxy rice flour until 70$^{\circ}C$, but lower after 80$^{\circ}C$. The gelatinization temperature, breakdown and consistency of nonwaxy brown rice flour by amylogram were higher than those of the waxy brown rice flour but setback was same. The initial gelatinization temperature and the enthalpy of nonwaxy brown rice flour by DSC were higher than those of the waxy brown rice flour.

• Applied Biological Chemistry
• /
• v.33 no.4
• /
• pp.293-300
• /
• 1990

The physical and chemical properties of dry acorn starch(DS), defatted acorn starch (DFS) and reincorporated acorn starch(RIS) were investigated. Swelling power and solubility of all starch sample, were exhibited two stage behavior. It had a little change on the pasting temperature of DS and DFS but the peak viscosity and breakdown value of DFS was somewhat higher than those of DS and RIS. Flow behavior of gelatinized starch pastes showed a pseudoplastic behavior and flow behavior index was lower than unit The consistency coefficient showed concentration and temperature dependency. The activation energies of DS, DFS and RIS were from $1.70Kca1/g\;{\cdot}\;mol$ to $3.75Kca1/g\;{\cdot}\;mol$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.1
• /
• pp.84-90
• /
• 2016

This study investigated the quality of wet noodles added with Allium hookeri powder. Wet noodles were prepared by addition of 0, 2, 6, and 10% powder to flour of the basic formulation. The water binding capacity of Allium hookeri powder was higher than that of flour. Swelling power and solubility increased with increased temperature. The weight, water absorption, volume, and turbidity values of cooked noodles showed no significant differences. The lightness value decreased with an increase in Allium hookeri powder content. The redness and yellowness values increased with an increase in Allium hookeri powder content. The textural properties of cooked noodles decreased with an increase in Allium hookeri powder content. Antioxidative activity as measured by 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity of wet noodles increased as the concentration of Allium hookeri powder increased. The highest quality noodles were obtained with 2% Allium hookeri powder in the wet noodle formula.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.286-286
• /
• 2017

We conducted to compare the characteristics of rice flours according to the different milling processes. Five rice varieties (Oryza sativa L.) with different amylose content were prepared by wet and dry milling processes. The moisture contents of wet-milled rice flours (WMR) was mostly three-time higher than those of dry-milled flours (DMR). Water absorption index (WAI), water solubility index (WSI) and swelling power (SP) increased in proportion to temperature ($50-90^{\circ}C$). WAI, WSI, SP of DMR showed higher value than those of WMR. Baeokchal (BOC) which is waxy rice cultivar was significantly high level of WSI. Pasting properties of DMR except BOC cultivar resulted in higher peak viscosity, trough viscosity, final viscosity and Setback. The levels of resistant starch in the four cultivars except Dodamssal (DDS) were under 1% irrespective of Milling processes, whereas the resistant starch contents of DMR and WMR in DDS was 9.18 and 6.27, respectively. Damaged starch content of WMR were less than those of DMR, moreover, negative correlation was observed between amylose content and damaged starch of rice cultivars. These results suggest that the properties of rice flour varied depending on the milling methods and varieties, and it could be a reference for selecting the appropriate processing purposes.

• Korean Journal of Food Science and Technology
• /
• v.19 no.1
• /
• pp.12-17
• /
• 1987

Physicochemical properties and gelatinization kinetics of Ol barley starch were studied. The granule size was $13-28\;{\mu}$ and the granule shape was oval or circular. Also, Ol barley starch had amylose content of 32%. Swelling power and solubility reached to the maximum values of 7.22 and 2.28% at the gelatinization temperature of $90^{\circ}C$. The pasting temperature of starch was slightly higher than those of powder and defatted powder. Most of the increase in light penetration was accomplished from the gelatinization temperature of $80^{\circ}C$ to $90^{\circ}C$. The gelatinization reaction of lL barley starch occurred in 2 stages. The activation energy of lst stage gelatinization reaction was 23.84 kcal/mole, whereas activation energies of 2nd stage gelatinization reaction were 33.38 and 72.82 kcal/mole around $80^{\circ}C$.

• Korean journal of food and cookery science
• /
• v.5 no.2
• /
• pp.43-50
• /
• 1989

Physicochemical properties on defatted potato starches, Irish Cobbler and Dejima, were investigated. The average diameter of the Irish Cobbler and Dejima starch were $22.5-29.8\mu\textrm{m}$, and both the starches had birefringence. Irish Cobbler starch was lower than that of Dejima starch in water binding capacity, swelling power and solubility. Relative crystallinity of both the starches was decreased after defatted. The blue value of Irich Cobbvler and Dejima starch was measured 0.37 and 0.35 respectively Transmittnace of 0.1% starch suspensions was higher on defatted starch than on untreated starch. Differential Scanning Calorimetry of untreated potato starch showeed higher gelatinization temperature in Irish Cobbler starch than in Dejiam starch. The gelatinization enthalpy of untreated starch was higher in Irisch Cobbler starch than in Dejima starch, but, after defatted, it was decreased.

• Applied Biological Chemistry
• /
• v.34 no.2
• /
• pp.94-101
• /
• 1991

Physicochemical properties of waxy and non-waxy naked barley starches were investigated. The starch granules observed by photomicroscope, polarized-light microscope and scanning electron microscope were round. The starch showed a typical A type by X-ray diffraction pattern. Water binding capacity, swelling power and solubility of waxy naked barley starch were higher than non-waxy naked barley starch at the same temperature. Transmittance of 0.1% starch suspension was increased rapidly from $60^{\circ}C$ in case of waxy naked barley starch and from $65^{\circ}C$ in case of non-waxy naked barley starch. Amylogram revealed that the non-waxy naked barley starches had higher initial pasting temperature than waxy naked barley starch. Enthalpy for gelatinization of non-waxy and waxy naked barley starches were 1.12-1.58 and 0.85 cal/g, respectively.