• Journal of Pharmaceutical Investigation
• /
• 제28권2호
• /
• pp.109-113
• /
• 1998

This study is purposed to develop the sustained release and bioavailability of piracetam (PA). The use of alginate beads as a means to achieve sustained release of piracetam was evaluated in comparison with that of piracetam alone. In the PA-sodium alginate(SA) beads was confirmed by differential scanning calorimetry thermogram(DSC), indicating a relative shift of an endometric peak of PA to higher temperature. The changes in dissolution rates from PA-SA beads and PASA beads coated by chitosan(CHO) were significantly slower than that of intact PA. The release rate of PA-SA in the gastric fluid was markedly decreased compared with that in the intestinal fluid, suggesting that PA is mostly released in the intestinal fluid. However, the PA/SA ratio scarcely affected the release profile. The blood concentration- time curves of PA, PA-SA and PA-SA-CHO were obtained by oral administration to rats. $T_{max}$ of PA, PA-SA and PA-SA-CHO were 1, 10 and 6 hours, respectively. It was confirmed that the release of PA was prolonged by the formulation of PA-SA beads and PA-SA-CHO beads.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.557-561
• /
• 2014

The aim of the present study was to improve dosing of lacosamide, a functionalized amino acid used as an antiepileptic agent, from twice daily to once daily for the convenience of patients. A sustained-release lacosamide tablet was developed and dissolution testing was employed to determine in vitro release behavior using water or buffer solutions at pH 1.2, 4.0, or 6.8. Lacosamide was released for 12 h from the sustainedrelease (SR) tablet, as compared to complete release within 1 h from an immediate-release $Vimpat^{(R)}$ tablet. Each formulation (100 mg) was orally administered to six beagle dogs and six mini-pigs under fasted conditions, and pharmacokinetic parameters such as the area under the concentration time curve ($AUC_t$), the maximum plasma concentration ($C_{max}$), and the time at which this occurred ($T_{max}$) were calculated. These results showed similar values for $AUC_t$, $C_{max}$, and $T_{max}$ following oral administration of immediate-release ($Vimpat^{(R)}$) and SR lacosamide tablets.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.139-144
• /
• 2002

Two types of alginate gel beads capable of floating in the gastric cavity were prepared. The first, alginate gell bead containing olive oil(Al-Oil), is a hydrogel bead and its buoyancy is attributable to olive oil held in the alginate gel matrix. The model drug, metronidazole(MZ), contained in Al-Oil was released gradually into artificial gastric fluid. The profiles of MZ release from Al-Oil shown initial burst and after 90 min they were about 100%. The second, alginate gel bead containing curdlan microsphere(Al-C), is a gel bead with curdlan-MZ microsphere in the matrix. To sustained release rate of drug, alginate bead were prepared curdlan microsphere containing MZ. Results demonstrated that sustained delivery of MZ over 2h can be easily achieved while the bead remained float. The release properties of prepared alginate beads are applicable not only for sustained release of drugs but also for targeting the gastric mucosa.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권6호
• /
• pp.476-481
• /
• 2004

The aim of this study was to formulate a sustained release system for indomethacin (IND) with rosin gum obtained from a pine tree. Rosin microparticles were prepared by a disper­sion and dialysis method without the addition of surfactant. In order to investigate the influence of solvents on the formation of colloidal microparitcles, various solvents like ethanol, DMF, DMAc, and acetone were used. The rosin microparticles containing IND were characterized by X­ray differactometry (XRD) and differential scanning calorimetry (DSC). The morphologies of rosin microparticles observed by scanning electron microscopy (SEM) were spherical. The solvents used to dissolve rosin significantly affected the drug content and drug release rate of IND. The release behaviors of IND from the rosin microparticles were dependent on the drug content and size of the particles. Rosin micorparticles with a higher drug content and of a larger particle size had a slower drug release rate. Also, the IND release rate from the rosin microparticles could be regulated by the rosin content in the microparticles. From these results, rosin microparticles have the potential of being used as a sustained release system of IND.

• 폴리머
• /
• 제36권3호
• /
• pp.332-337
• /
• 2012

본 연구는 약물의 용해도에 따른 서방성 용출 거동의 특성을 파악하기 위해 수행되었으며, 이에 따라 고분자의 입도에 따른 염산벤라팍신과 카바마제핀의 정제를 제조하였다. 사용된 고분자는 경구를 통한 서방성 약물전달 시스템 설계에 가장 널리 사용되는 히드록시 프로필 메틸셀룰로오스(HPMC)이며, HPMC의 입도 분포에 따른 팽윤 속도의 차이는 중요한 특성으로 약물의 용출에 큰 영향을 미친다. HPMC 입도에 따른 정제 표면을 분석하기 위해 SEM을 사용하였으며, 결정학적 특성을 파악하기 위해 DSC를 이용하여 분석하였고, 용출 특성의 주요 메카니즘을 파악하기 위해 용출 모델식을 적용하였다. 본 연구를 통해 약물의 용해도 및 HPMC의 입도에 따라 약물의 용출 거동을 조절할 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제22권3호
• /
• pp.205-210
• /
• 1992

In order to develop a controlled-release oral drug delivery system (DDS) of theophylline (TP), microporous membrane-coated tablets were prepared and evaluated in vitro and in vivo. Rapidly water-soluble core tablets of TP (300 mg) were prepared by wet granulation and compression technique, Then the core tablets were spray-coated with polyvinylchloride (PVC) in which micronized sucrose particles were dispersed. Effect of formula compositions of coating suspensions on the pharmaceutical characteristics such as membrane strength and dissolution was investigated in vitro. The membranes remained unbroken in pH 1.2 buffer at $37^{\circ}C$ at least for 2 hours after the disintergration test. TP was released from the coated-released tablets at a zero-order rate over 8 hours. The release at pH 1.2 and 4.0 was similar in rate but a little more rapid than that at pH 6.8. The coated tablets were administered to three healthy male volunteers and their saliva profiles of TP were compared with those from the commercial sustained release TP tablets such as Slobid and Asconthin. Saliva TP concentrations from the coated tablets were successfully sustained over 48 hours after the dosing and were comparable to those of the commercial sustained-release tablets. The membrane-coating technique is very simple and does not need any sophisticated equipments. In this respect, the membrane-coated tablets may be superior to the commercial sustained-release tablets and this technique is worth adopting by the pharmaceutical industries.

• Journal of Pharmaceutical Investigation
• /
• 제30권4호
• /
• pp.241-246
• /
• 2000

To develop a sustained-release preparation containing ketorolac tromethamine, two sustained-release pellet formulations were evaluated with a pharmacokinetic study as compared with a conventional commercial tablets (10 mg $Tarasyn^{TM}$, Roche Korea Ltd.). Two sustained-release formulations were as follows; formulation A was composed of an inner layer containing 75% of drug coated with $Eudragit^{TM}$ RS 100 membrane and an outer layer containing 25% of drug mixed with $Eudragit^{TM}$ NE30D, and formulation B was composed of only an inner layer containing 100% of drug coated with $Eudragit^{TM}$ RS 100 membrane. The dissolution test was performed for two formulations. In case of conventional tablets, 2.5 mg of drug per a dose was administered orally into male Albino rabbit (2.0-2.3 kg of body weight) 3 times at intervals of 4 hours. In case of two sustained formulations, 7.5 mg of drug was administered once orally. Blood samples were withdrawn periodically after the administration, and the blood concentration was determined by HPLC. The conventional tablets showed very high peak-trough fluctuation between administered doses, but two sustained formulations showed less fluctuation. Formulation A with the loading dose showed the time to reach minimum effective concentration (MEC) i.e. the onset time was less than 20 min, while Formulation B had more than 1 hr of the onset time. Formulation A had the more constant plasma level than formulation B. However, formulation B had a time lag, so the plasma level was less than MEC for an initial period of 1 hr. In formulation A, the plasma level was maintained within the therapeutic window $(0.3-5\;{\mu}g/ml)$ for a long period. Formulation A was thought to be an ideal sustained-release formulation for ketorolac tromethamine oral delivery system.

• Journal of Pharmaceutical Investigation
• /
• 제5권1호
• /
• pp.41-48
• /
• 1975

Extrusion-Spheronization Processing (ESP) was applied to preparate sustained release spherical particles as a form of matrix spherical particle (MSP). dl-methylephedrine HCI (ME) was the drug chosen and several dissolution retardants and binders were selected to estimate a relatively good formulation on this purpose. The effect of physicochemical nature, concentration, and solvents of these dissolution retardants and binders on regularity in shape of MSP and in vitro release rate was investigated. The effect of Particle size of matrix particles was also evaluated. It is, therefore, concluded that this ESP would be a relatively good preparation method of sustained release MSP of ME which has the sustained action of about 5 and 8 hours by formulating of ethylcellulose and ethylcellulose-paraffin as a dissolution retardant, respectively, and then ethylcellulose solution of 80% EtOH is recommended as a binder.

• Journal of Pharmaceutical Investigation
• /
• 제28권1호
• /
• pp.51-57
• /
• 1998

Tetracycline lyogel ointment consisting of hydroxy ethyl cellulose(HEC) in glycerin and Eudragit RS 100 in triacetin were prepared and then release characteristic were investigated. The physical properties of lyogel ointment such as viscosity, particle size and microscopic structures were also evaluated. The microscopic structures showed that lyogel particles containing drug were dispersed in the triactin solution. The release rate of drug from lyogel ointment as a function of HEC was not changed. However the release rate was significantly decresed when the amount of Eudragit RS 100 and triacetin in lyogel ointment was increased. The viscosity and weight fraction in external phase of lyogel ointment influenced the release rate. The current studies suggest that the release rate of drug can be controlled by changing of lyogel ointment compositions.

• Journal of Pharmaceutical Investigation
• /
• 제33권3호
• /
• pp.179-185
• /
• 2003

Melatonin (MT) is an indole amide pineal hormone. It has not only very short half-life but also pH-sensitive property. The sustained release dosage form which delivers MT in a circadian fashion over 8 h is clinical value. The purpose of this study is to prepare sugar beads using multiple coating methods and enteric-coated in a sustained release to evaluate in vitro release characteristics in simulated gastric and intestinal fluids. The $Eudragit^{\circledR}$ as a polymer, sustained release membrane, and triethylcitrate (TEC) as a plasticzer were used. Multi-coated melatonin delivery system was composed of sugar, various excipients, $Eudragit^{\circledR}$ and enteric materials (e.g. hydroxy propyl methyl cellulose phthalate, HPMCP), and prepared by fluid bed coater. The dissolution test was carried out using the basket method at a stirring speed of 100 rpm at $37^{\circ}C$ in simulated gastric (pH 1.2) and intestinal fluid (pH 7.4). The released amount of MT was determined by High performance liquid chromatography method. The morhologies of surface and cross section of multi-coated beads were observed by scanning electron microscope. Size of multi-coated sugar beads was ranged over $1000{\sim}1300\;{\mu}m$. The release rate of MT from coated beads was limited in simulated gastric fluid (pH 1.2), but it was sustained in intestinal fluid (pH 7.4) during $3{\sim}8$ hours. The MT beads may provide small-intestine-targeted device for oral delivery. Studies on animal and relative experiment are in process.