• 한국습지학회지
• /
• 제5권1호
• /
• pp.67-78
• /
• 2003

The unsteady 2D convection and diffusion equation is solved numerically for the real-time simulation of suspended load propagation. The streamlined upwind scheme efficiently reduces numerical oscillations due to the high Peclet number in the convection dominant flow. By using the mixed boundary condition to express the external source terms or externally induced suspended load as a function of time in the algorithm, the model is capable of handling not only continuous load cases but also non-continuous suspended load influx. The suspended load transport modelwas verified using a case study for which an analytical exact solution is available and was applied to the real-time simulation of a suspended load influx case on the Mississippi River. The model algorithm can provide a framework upon which water quality as well as contaminant transport models can be built.

• Structural Engineering and Mechanics
• /
• 제22권2호
• /
• pp.197-222
• /
• 2006

In this paper, the non-linear time-dependent closed-form, discrete and combined solutions for the post-elastic response of a geometrically and physically non-linear suspended cable to a uniformly distributed load considering the creep effects, are presented. The time-dependent closed-form method for the particularly straightforward determination of a vertical uniformly distributed load applied over the entire span of a cable and the accompanying deflection at time t corresponding to the elastic limit and/or to the elastic region, post-elastic and failure range of a suspended cable is described. The actual stress-strain properties of steel cables as well as creep of cables and their rheological characteristics are considered. In this solution, applying the Irvine's theory, the direct use of experimental data, such as the actual stress-strain and strain-time properties of high-strength steel cables, is implemented. The results obtained by the closed-form solution, i.e., a load corresponding to the elastic limit, post-elastic and failure range at time t, enable the direct use in the discrete non-linear time-dependent post-elastic analysis of a suspended cable. This initial value of load is necessary for the non-linear time-dependent elastic and post-elastic discrete analysis, concerning incremental and iterative solution strategies with tangent modulus concept. At each time step, the suspended cable is analyzed under the applied load and imposed deformations originated due to creep. This combined time-dependent approach, based on the closed-form solution and on the FEM, allows a prediction of the required load that occurs in the post-elastic region. The application of the described methods and derived equations is illustrated by numerical examples.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.605-611
• /
• 2002

본 논문에서는 임의의 두께의 기판을 갖는 suspended stripline의 효율적인 계산을 위해 Yee cell의 내부에 두개의 유전체(공기와 기판)가 있을 때 사용할 수 있는 FDTD 수식을 유도하였으며 이를 이용하여 suspended stripline의 특성 임피던스와 유효유전율을 계산하였다. 이러한 계산결과를 이용해서 suspended stripline 5단 저역통과 필터를 설계하였고 이를 제작 측정하여 된 논문에서 제안된 FDTD법을 이용한 suspended stripline해석의 유용성을 입증하였다.

• 상하수도학회지
• /
• 제13권2호
• /
• pp.82-88
• /
• 1999

This study was to evaluate disinfection efficiency of chlorine and chloramine as secondary disinfectants in the distribution systems. Indicator organism, HPC in the suspended and attached were measured for copper, galvanized steel, PVC, and carbon steel pipes. For suspended microorganism, the PVC pipe was markedly dense among the assessed pipe materials. The attached microorganism was markedly equivalent roughness of pipe materials. In copper and galvanized pipes, chloramine was more effective that free chlorine to disinfect suspended microorganism in the contact time of 2 hours. The contact time for the 99% inactivation of suspended microorganism by chloramine was longer than that of free chlorine. Regardless of pipe materials, chloramine was effective on both disinfection efficiency and 99% inactivation time for attached microorganism. In conclusion, chloramine which is good disinfectant for long contact time was recommended as secondary disinfectant in distribution system.

• 센서학회지
• /
• 제22권5호
• /
• pp.346-351
• /
• 2013

We developed a one-step method for fabrication of addressable suspended SWNT films and demonstrate excellent detection performance of paraoxon based on OPH-immobilized SWNT films for environmental monitoring. For dispersed SWNT suspension, COOH-SWNT was prepared by the oxidation of carbon nanotubes using acid treatment and sonication. Suspended SWNT-film was fabricated between cantilever electrodes by dielectrophoretic force and surface tension of the water meniscus. After that, OPH were immobilized on suspended SWNT-films by nonspecific binding for enzymatic hydrolysis of paraoxon. The electrical properties of the SWNT films were measured in real time at room temperature. Structurally suspended SWNT films from substrate surface made possible rapid and highly sensitive detection of target molecules with increased convectional and diffusional fluxes of the molecules and with a large binding surface area. SWNT film FET resulted in a real-time, label-free, and electrical detection of paraoxon to the concentration of ca. $10{\mu}m$ with a step-wise rapid response time of several seconds.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.22-26
• /
• 2010

The ignitability(minimum ignition energy, MIE) of a suspended dust clouds is very important aspect of technical safety indices. This paper reported the experimental results dealing with the influence of discharge circuit on the MIE of a suspended dust clouds. The movement of a suspended dust clouds was also observed with the high speed camera. The Hartmann vertical-tube apparatus(MIKE-3) described in the international standard of IEC and Polypropylene (PP, 50% volume-average, D50: $761{\mu}m$) resin powders were used in this experiment. The following results were obtained: (1) the MIE of a suspended PP powder depended markedly on the discharge circuit; in other words, when a resistor was connected in series with the discharge sparking circuit(RC), the lowest value(31mJ) of MIE was obtained for a suspended PP powder comparison with the other circuits(C circuit; 370mJ or LC circuit; 71mJ). (2) the discharge duration time is more important than other factors with regard to MIE of a suspended PP powder.

• 농업과학연구
• /
• 제24권2호
• /
• pp.290-297
• /
• 1997

Danored is considered as the most favorable grape variety for national wine manufacturing in terms of sugar, organic acid contents, annual production amount, as well as quality control convenience after harvest. This study was canied out to know the influence of suspended solid(SS) and skin contact time(SCT) with Danored variety on the white wine quality. The results are summarized as follows; 1. Suspended solid and skin contact time did not greatly influence on the chemical composition of Danored juice. But skin contact time provided slightly increaseness to the content of phenol compounds 2. Suspended solid accelerated fermentation rate of white wine manufacturing. Although the content of suspended solid are less amount than 0.3% in must, wine fermentation was completed to dryness in concentration of sugar. 3. When the content of suspended solid was around 3%, higher alcohol in white wine was increased by the 20%. This result is relatively small increasement compared to the other reported results. 4. Because Danored contained less amount of phenol compounds comparison with other grape varieties, browning capacity in white wine was much favorable to quite low concentration. Especially, phenolic compounds was decreased remarkably as one of fermentation characteristics of Danored variety. 5. As a result of sensory evaluation, wine quality was A-1> B-1> A-2> B-2 in its favorable ranking orders. It was so concluded that A-1 might be the most acceptable one from this study.

• 상하수도학회지
• /
• 제26권1호
• /
• pp.87-95
• /
• 2012

In this study, the following conclusions were obtained from an investigation of the effect of the simulation time step on the simulation results of the two-dimensional, vertically averaged sediment transport model SED2D and an analysis of the deposited sediment distribution in suspended sediments of reservoirs according to grain size. The simulation time step has a significant effect on the deposited sediment distribution in a reservoir. In particular, if the simulation time step is set to be excessively large, physically invalid results are obtained. Additionally, in order to determine an appropriate simulation time step for SED2D, the selection of a simulation time step that will allow the analysis of the suspended sediment concentration profile at the main points of the simulation domain is necessary. The deposited sediment distribution in a reservoir according to grain size, including suspended sediments of clay, silt, and sand, was successfully simulated. Such information will prove valuable in application to the establishment of efficient management and reduction measures of reservoir sediment deposits.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권7호
• /
• pp.54-62
• /
• 2013

Fine suspended solids and soluble heavy metals generated from mine drainage could destroy environment as the aesthetic landscapes, and depreciate water quality. Therefore, this research is focused on process development applied the actual field for controlling fine suspended solids and heavy metals, and so that bench-scale tests were performed for field application based on advanced researches. The field of mine drainage in this research was in H mine located Taebaek-si, Gangwon-do. The inclination plates were mounted 2 kinds of arrangement (octagon and radial types) in circle type settling basin. The inclination plates could be helped to settle of suspended solids; decreased 34% of suspended solids and 50% of turbidity in effluent. Radial type of inclination plates showed the results that is more efficient to settle of suspended solids (average to 3.45 mg/L) compared to octagon type. In the experiments to decrease retention time of mine drainage in settling basin from 6 hrs to 1.5 hrs, suspended solid concentration was exceeded to 30 mg/L as the standard for suspended solid at 10 days after the operation under tha retention time of 3hrs and 1.5hrs. In the tests for filtration, granular activated carbons were indicated the better effective to filtering and absorption of fine suspended solid and soluble heavy metals than anthracite.

• 물과 미래
• /
• 제25권2호
• /
• pp.67-78
• /
• 1992

Several field surveys were conducted to investigate changes of water quality with time in a tidal river. Results indicated that nitrification process were dependent on the change of salinity and suspended solids concenttration. Therefore laboratory batch experiments were conducted, using suspended solids and sediment taken from a tidal river, to study the effect of salinity on nitrification and to estimate kinetic parameters of it in the tidal river. suspended solids and sediment were sampled at a point in the middle stream. Sediments were collect from the aerobic layer of mud. The change of nitrogen concentration with time was clearly explained with Monod groth model and kinetic parameters were obtained by curve fitting method. Changes in NH4-N, NO2-N, and NO3-N concentrations in the river ROKKAU with time were simulated well using Lagrangian reference frame and parameter values obtained in the laboratory tests. T도 mechanism of nitrification by suspended solids and sediment in a tidal river is shown to depend on tidal effects.