• 한국환경생태학회지
• /
• 제36권4호
• /
• pp.422-432
• /
• 2022

본 연구는 백두대간 생태축 복원사업지에서의 수목 생육 장애 요인을 평가하기 위해서 토양 및 미기상 환경모니터링을 실시했다. 그 결과 복원 사업지에서는 주변 산림과 비교하여 토양의 유기물, 전질소 및 양이온치환용량이 부족하여 양분 공급이 결핍된 것으로 나타났다. 복원사업 준공 직후인 가을철 토양수분은 복원사업지가 주변 임내와 비교하여 7배 이상 빠르게 감소했으며, 미사질과 점토 함량 부족으로 인해 보습력이 매우 낮은 것으로 평가되었다. 복원 사업지의 경우 주변 임내와 비교하여 연간 잠재증발산량이 약 2배 높은 975mm로 분석되었다. 복원사업지의 여름철 토양 수분은 일사량이 증가하는 낮 시간대에 급격하게 감소하는데 이는 잠재증발산량 증가의 영향이 큰 것으로 나타났다. 이상의 수목 생육 장애 요인을 개선하기 위해서는 낙엽, 부엽토, 토양개량제, 유기질 비료 시비 등을 활용하여 보습력 증진 등 물리성 개량과 양이온치환능을 증가시켜 식물에게 원활한 양분 공급이 이루어질 수 있도록 유도해야할 것으로 판단된다. 본 연구의 결과는 향후 생태축 복원사업의 설계와 시공 및 관리방안 수립의 기초 자료가 될 수 있을 것으로 기대된다.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.593-601
• /
• 2023

In this paper, an analytical solution of large-strain cylindrical cavity expansion in compaction grouting problem under temperature field is given. Considering the stress increment caused by temperature, the analytical solution of cavity expansion under traditional isothermal conditions is improved by substituting the temperature stress increment into the cavity expansion analysis. Subsequently, combined with the first law of thermodynamics, the energy theory is also introduced into the cylindrical cavity expansion analysis, and the energy dissipation solution of cylindrical cavity expansion is derived. Finally, the validity and reliability of solution are proved by comparing the results of expansion pressure with those in published literatures. The results show that the dimensionless expansion pressure increases with the increase of temperature, and the thermal response increases with the increase of dilation angle. The higher the exothermic temperature of grouting slurry, the greater the plastic deformation energy of the surrounding soil, that is, the greater the influence on the surrounding soil deformation and the surrounding environment. The proposed solution not only enrich the theoretical system of cavity expansion, but also can be used as a theoretical tool for energy geotechnical engineering problems, such as CPT, nuclear waste disposal, energy pile and chemical grouting, etc.

• 한국지반신소재학회논문집
• /
• 제12권4호
• /
• pp.21-33
• /
• 2013

본 연구에서는 FNS의 공학적 특성을 평가하고, 소형 및 대형 모형토조를 통하여 원지반과 유사한 조건으로 FNS 매립시에 주변토양에 미치는 환경적 영향을 평가하고자 하였다. 주입액은 담수, 산성, 해수를 사용하였으며 모래와 실트시료를 사용하여 각각 상대밀도(40%, 60%)와 다짐도(90%) 조건을 선정하여 실험하였다. 소형 및 대형 모형토조에서 배출되는 용출액은 pH 분석을 실시하였으며, 주입이 완료된 후에 샘플을 추출하여 토양오염분석을 수행하였다. 그 결과, 모래보다 실트에서 pH의 오염도가 더 높게 나타남을 확인할 수 있었고, FNS가 주변 토양에 미치는 환경적 영향은 미미한 것으로 나타나 향후 천연골재 대체재로 활용 가능할 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제27권5호
• /
• pp.497-509
• /
• 2021

A large deformation FEM (Finite Element Method) based numerical analysis has been performed to study the behaviour of the bell-shaped anchor embedded in undrained saturated (cohesive) soil with the help of finite element based software ABAQUS. A typical model anchor with bell-diameter of 0.125 m, embedded in undrained saturated soil with varying cohesive strength (from 5 kN/m² to 200 kN/m²) has been chosen for studying the characteristic behaviour of the bell-shaped anchor installed in cohesive soil. Breakout factors have been evaluated for each case and verified with the results of experimental model tests for three different types of soil samples. The maximum value of breakout factor was found as about 8.5 within a range of critical embedment ratio of 2.5 to 3. An explicit model has been developed to estimate the breakout factor (F_c) for uplift capacity of bell-shaped anchor within clay mass in terms of H/D ratio (embedment ratio). It was also found that, the ultimate uplift capacity of the anchor increases with the increase of the value of cohesive strength of the soil and H/D ratio. The empirical equation developed in the present investigation is usable within the range of cohesion value and H/D ratio from 5 kN/m² to 200 kN /m² and 0.5 to 3.0 respectively. The proposed model has been validated against data obtained from a series of model tests carried out in the present investigation. From the stress-profile analysis of the soil mass surrounding the anchor, occurrence of stress concentration is found to be generated at the joint of anchor shaft and bell. It was also found that the vertical and horizontal stresses surrounding the anchor diminish at about a distance of 0.3 m and 0.15 m respectively.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
• /
• pp.183-188
• /
• 1998

The efficiency of removing cadmium, copper, and lead from a contaminated soil of abandoned metal mine was studied in a laboratory investigation where citric acid were used to extract the metal from the soil. The contamination level of Pb, Cu in the soil A were 875.5, 667.5mg/kg respectively. The mobility and bioavailability of the metals in soil were also estimated by Sequential Chemical Extractions. Citric acid were examined for its potential extractive capabilities. Concentrations of the acid examined in this study ranged from 0.025 to 0.15M. The pH of the suspensions and S/S ratio in which the extractions were performed ranged from 2.4 to 8.1, and from 2.1:1 to 20:1. Results showed that the removal of contaminant using citric acid was pH and S/S raton dependent.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.397-404
• /
• 2001

Sand pile is one of the widely used ground improvement methods. Sand pile improved ground will have composite ground effects, even though the primary purpose is the accelerated consolidation. However, the consolidation of sand pile improved ground as a composite ground is substantially under developed. This study investigate the effect of composite ground for relatively low volume displacement sand piles. Plate bearing tests and earth pressure cell measurements are performed. It turned out that the contribution of sand pile as a load bearing mechanism is not substantial. However the bearing capacity of the surrounding clayey soil is increased by sixty percent, and it cause the stiffness change during consolidation. Therefore it is expected that, the effect of increased stiffness of sand pile improved ground is influenced by change of ground stiffness.

• Structural Engineering and Mechanics
• /
• 제10권4호
• /
• pp.299-312
• /
• 2000

The response of an embedded body to dynamic loads is greatly influenced by the reactions of the soil to the motion of the body. The properties of the soil surrounding embedded bodies (e.g., piles) may be different than those of the far-field for a variety of reasons. It may be weakened or strengthened according to the method of installation of piles, or altered due to applying one of the soil strengthening technique (e.g., electrokinetic treatment of soil, El Naggar et al. 1998). In all these cases, the shear strength of the soils and its shear modulus vary gradually in the radial direction, resulting in a radially inhomogeneous soil layer. This paper describes an analysis to compute vertical and torsional dynamic soil reactions of a radially inhomogeneous soil layer with a circular hole. These soil reactions could then be used to model the soil resistance in the analysis of the pile vibration under dynamic loads. The soil layer is considered to have a piecewise, radial variation for the complex shear modulus. The model is developed for soil layers improved using the electrokinetic technique but can be used for other situations where the soil properties vary gradually in the radial direction (strengthened or weakened). The soil reactions (impedance functions) are evaluated over a wide range of parameters and compared with those obtained from other solutions. A parametric study was performed to examine the effect of different soil improvement parameters on vertical and torsional impedance functions of the soil. The effect of the increase in the shear modulus and the width of the improved zone is investigated.

• 콘크리트학회논문집
• /
• 제15권2호
• /
• pp.225-233
• /
• 2003

지진하중을 받는 철근콘크리트(이하 RC) 구조물의 해석, 설계 및 성능 평가 등에 대해서는 많은 연구가 진행되어 왔으나, 지반에 둘러싸여 있는 지하 RE 구조물의 지진 해석에 대해서는 상대적으로 연구가 부족하였다. 지중의 지하 구조물은 지상 구조물과는 달리 지반과 상호작용을 하며 거동을 하기 때문에 지반내에서 하중을 받는 RC 구조물의 거동을 해석하기 위해서는 지진하중 하에서의 지반층의 거동을 예측할 수 있는 지반의 경로의존적 구성모델이 반드시 필요하다. 또한 RC 구조물과 지반 사이의 상호작용은 매체의 경계면을 통해 전달되기 때문에 보다 정확한 RC 구조물의 내진성능을 해석하기 위해서는 경계구역의 거동이 해석시에 반드시 고려되어야 한다. 이에 따라 본 논문에서는 지하 RC 구조물의 내진성능을 해석적으로 예측하기 위해 RC구조물에 대해서는 철근과 콘크리트의 평균화된 구성모델을 적용하였고, 지반에 대해서는 경로의존적 Ohsaki 모델을 적용하였으며, 두께를 갖는 탄소성 경계면 모델을 제안하였다. 또한 지진하중을 받는 지하 RC 정거장 구조물에 대한 내진 해석을 수행하여 지진시의 지하 RC 구조물의 파괴 기구를 해석적으로 구하였고, RC 구조물에 대한 상대적인 배근 설계에 따른 파괴 모드의 변화와 구조물의 손상 정도의 변화를 해석적으로 구하였다.

• 한국환경복원기술학회지
• /
• 제7권2호
• /
• pp.36-45
• /
• 2004

This study was conducted to formulate management guidelines for monumental old trees in Korea through analysis of growing environments. A total of 20 old trees designated as natural monuments in Seoul, Incheon, and Gyeonggi provinces were surveyed for biological characteristics, surrounding environments, root collar conditions, tree health, and soil characteristics. Relationships among root collar conditions, tree health, and soil characteristics were analyzed by correlation. The old solitary trees designated as natural monuments included Pinus bungeana(4 trees), Juniperus chinensis(3 trees), Ginkgo biloba(3 trees), Poncirus trifoliata(2 trees), Actinidia arguta, Wisteria floribunda, Thuja orientalis, Quercus variabilis, Sophora japonica, Fraxinus rhynchophylla, Zelkova serrata, and Pinus densiflora. The tree height ranged from 3.56 to 67m, and root collar diameter ranged from 1.01 to 15.2m. The monumental old trees were growing on the various sites ranging from gardens, historical sites, open agricultural fields, mountain hills, to near the ocean beaches and streams. The coverage of bald land ranged from 50 to 100%, and depth of filled soil around the root collar ranged from 0 to 50cm. Tree health was expressed as the amount of branch dieback, cavity development, detachment of cambial tissue, infliction by diseases and insects. The branch dieback ranged from 5 to 20%, cavity development ranged from 10 to 100$cm^3$, detachment of cambial tissue ranged from 5 to 45%, and infliction by diseases and insects ranged from 5 to 20%. Soil pH ranged from 5.9 to 8.3, organic matter contents from 12 to 56%, phosphorus contents from 104 to 618ppm, while soil compaction ranged from 7 to 28mm. Results of correlation analysis showed that coverage of bald land was the most serious factor to deteriorate the cavity development and detachment of cambial tissue. In addition, chemical properties of soils seemed to be related to the health of the trees.

• Geomechanics and Engineering
• /
• 제5권3호
• /
• pp.241-261
• /
• 2013

The bearing mechanism of pile during installation and loading process which controls the deformation and distribution of strain and stress in the soil surrounding pile tip is complex and full of much uncertainty. It is pointed out that particle crushing occurs in significant stress concentrated region such as the area surrounding pile tip. The solution to this problem requires the understanding and modeling of the mechanical behavior of granular soil under high pressures. This study aims to investigate the sand behavior around pile tip considering the characteristics of sand crushing. The numerical analysis of model pile loading test under different surcharge pressure with constitutive model for sand crushing is presented. This constitutive model is capable of predicting the dilatancy of soil from negative to positive under low confining pressure and only negative dilatancy under high confining pressure. The predicted relationships between the normalized bearing stress and normalized displacement are agreeable with the experimental results during the entire loading process. It is estimated from numerical results that the vertical stress beneath pile tip is up to 20 MPa which is large enough to cause sand to be crushed. The predicted distribution area of volumetric strain represents that the distributed area shaped wedge for volumetric contraction is beneath pile tip and distributed area for volumetric expansion is near the pile shaft. It is demonstrated that the finite element formulation incorporating a constitutive model for sand with crushing is capable of producing reasonable results for the pile loading problem.