• 제목/요약/키워드: surplus material

검색결과 35건 처리시간 0.021초

The effect of Korea's policy to support the purchase of raw materials for export of livestock products

  • Jaesung Cho;Sanghyen Chai;Hanpil Moon
    • 농업과학연구
    • /
    • 제49권4호
    • /
    • pp.761-769
    • /
    • 2022
  • The Livestock Raw Material Purchase Fund is a policy to increase the export of livestock products by providing loans to exporters of livestock products (including byproducts). The policy started in 2015 and the annual budget is about 26 billion won. However, a quantitative evaluation of policy effects has not yet been made. Therefore, in this study, the economic surplus of the policy was analyzed using the equilibrium displacement model (EDM). From the results of the welfare analysis, from 2016 to 2019, producer surplus in the chicken and duck market increased by KRW 70.9 billion, while consumer surplus decreased by KRW 70 billion. In other words, the total economic surplus of the chicken and duck market increased by about one billion won during the same period due to the increase in export demand according to the policy. Therefore, the Livestock Raw Material Purchase Fund can be viewed as a policy to maintain and increase export demand for export livestock products and to improve the economic surplus of the livestock product market. Also, since the policy is based on loans, it does not place a burden on the government's finances. Therefore, this policy should continue in the future.

부산 경남지역 산지 현장 발생토의 다짐특성 연구 (A Study on Compaction Characteristics of Surplus Soils in Mountainous Areas in Busan, GyungNam Province)

  • 강성욱;노기주;김태형;주인곤
    • 한국지반신소재학회논문집
    • /
    • 제22권2호
    • /
    • pp.63-70
    • /
    • 2023
  • 부산 및 경남지역의 산업단지 및 주택단지 조성은 일부 매립 지역을 제외한 대부분이 산지를 개발하여 형성되었다. 단지 개발과정에서 부지조성을 위한 산지 현장 발생토를 성토재료로 주로 사용하고 있다. 하지만 현장에서는 부지조성을 위한 성토작업 시 재료의 재질이 변화하여도 시공기간 및 현장여건 등의 편의상의 이유로 성토 재료에 대하여 물성시험 및 다짐시험을 추가적으로 실시하지 않고 품질관리를 하고 있는 실정이다. 본 연구에서는 부산 및 경남지역 산지 현장 발생토에 대한 물성시험 및 다짐시험을 실시한 후 회귀분석을 실시하였다. 그리고 국내의 기존연구와 비교 분석하였다. 부산 및 경남지역 현장 발생토는 주로 화강암류의 풍화토로서 점토질모래(SC) 및 실트질모래(SM)으로 분류되며, 조립토 및 세립토의 함유량에 따른 다짐특성을 회귀분석한 결과 상관성이 매우 높은 것으로 나타나 금 번 연구결과 관계식을 활용하면 현장 발생토의 다짐관리 시 매우 유용하게 활용될 수 있을 것이다.

전시 군수물자의 효율적 분배와 수송을 위한 TC 위치선정 방법론 연구 (Method of Location Decision far a Transfer Center Distributing a Necessary Resource Item while Considering Characteristics of the Material in Wartime)

  • 정병호;김익기
    • 한국국방경영분석학회지
    • /
    • 제35권2호
    • /
    • pp.1-14
    • /
    • 2009
  • 전시 공군은 각 지역에 거점부대를 선정하여 해당 지역에서 동원되는 품목별 물자를 인수하고, 물자가 부족한 지역의 거점부대에 잉여물자를 분배하여 전체 부대가 일정한 군수지원 수준을 유지할 수 있도록 계획하고 있다. 또한, 지역 거점부대는 해당지역에 주둔하고 있는 군소 운영부대들에 대한 DC(Distribution Center)의 역할도 담당하여 지역에서 동원되는 물자들과 타 지역 거점부대로부터 인수한 해당 지역 부족물자들을 군소운영부대에 분배한다. 하지만, 전시 동원물자 수송은 물자가 많이 동원되는 지역의 거점부대가 물자가 적게 동원되는 부대로의 분배 및 수송을 책임지기 때문에 동원물자들의 생산특성에 따라 지역 거점부대별 수송부담의 불균형과 다빈도 수송으로 인한 수송 자산(병력, 수송수단)의 낭비를 가져오게 된다. 또한, 공군본부나 군수사령부와 같은 상급부대는 전체적인 동원물자의 분배와 수송을 효율적인 방향으로 조정 통제하는데 대한 어려움이 있다. 본 연구에서는 이러한 어려움을 해소하기 위해 특정지역에 TC(Transfer Center)를 설치하여 물자를 분배하고 수송하는 방법론을 제시고자 한다.

성토재료로 부적합한 현장 발생토의 토목섬유 보강효과에 관한 실험적 연구 (Experimental Study on Reinforcement Effect of Geosynthetics for Surplus Soil, an Unsuitable Fill Material)

  • 홍용석;임종철;강상균;유재원;김창영
    • 한국지반신소재학회논문집
    • /
    • 제17권1호
    • /
    • pp.11-20
    • /
    • 2018
  • 양호한 성토재료는 현장에서 즉시 입수가 곤란하고 재료의 확보를 위한 추가적인 비용이 발생하여 각 현장에서는 현장 발생토를 직접 사용하는 경우가 많지만, 현장 발생토는 대부분 성토재료의 기준에 적합하지 않기 때문에 성토체의 안정성이나 강성을 확보하는데 어려움이 있다. 본 연구에서는 성토재료로 부적합한 흙의 다짐시 발생하는 문제점들을 개선하기 위하여 토목섬유를 보강하여 실내다짐시험과 현장다짐실험을 하였다. 실내다짐시험(KS F 2312)의 A, D다짐시험과 A다짐시험에서 다짐에너지와 토목섬유의 보강 층수를 다르게 하였고, 현장다짐실험은 함수비가 높은 현장 발생토에 토목섬유를 보강하고 다짐을 실시하였다. 그 결과, 실내다짐시험에서는 토목섬유를 보강함으로써 최적함수비는 감소, 최대건조밀도 증가하여 다짐곡선은 다짐에너지를 증가시켜 다짐한 경우와 비슷한 거동을 하였고, 건조밀도와 다짐에너지의 관계로부터 다짐에너지는 토목섬유를 1열, 2열 보강하였을 때 각각 평균 2.10배, 평균 2.71배 증가하여 토목섬유를 보강하고 다짐하면 큰 다짐에너지로 다짐한 것과 같은 효과로 더 효율적인 다짐이 가능한 것으로 분석되었다. 그리고 현장다짐실험에서 토목섬유를 보강함으로써 건조밀도는 증가하는 것으로 분석되어 다짐시 토목섬유를 보강하여 다짐을 실시하면 함수비가 높고 성토재료로 부적합한 현장 발생토를 사용하더라도 효율적인 다짐이 가능한 것으로 입증되었다.

The Use of Finite Element Method to Predict the Hot Shear-Welding Process of Two Aluminum Plates

  • Shang, Li-Dong;Lee, Kyeng-Kook;Jin, In-Tai
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2008년도 추계학술대회 논문집
    • /
    • pp.426-430
    • /
    • 2008
  • Hot shear-welding is a process of bonding two plates together by using shearing stress in a controlled manner. This study dealt with the hot shear-welding process of two aluminum plates. These two plates were piles up in the shear-welding mold. Due to the shearing stress, these two plates were cut off longitudinally, and meantime they were welded together. During this process the control of the surplus material flow is very important, and it can be realized by designing the overlapping length and the shape of the cavity. The commercial software Deform-3D was employed to predict the effect of these two factors. The overlapping length and the shape of the cavity that presents the optimum design was then developed to get a good shear-welding process.

  • PDF

고역률 LED 구동회로의 효율화에 관한 연구 (A Study on the Efficiency of a High Power Factor LED Driver Circuit)

  • 이동원;김병철
    • 한국전기전자재료학회논문지
    • /
    • 제26권8호
    • /
    • pp.629-634
    • /
    • 2013
  • The rectified voltage supplied to LED lamp is used in load and then the surplus voltage can be produced in LED lighting. In this case, LED lighting is proposed that can recyclable the excess voltage to supply power to the controller.

지중송전관로용 급결 유동성 뒤채움재의 시공법 설정에 관한 실험적 연구 (A Experimental Study on the Determination of Construction method of Controled Low-strength Material Accelerated Flow Ability Using Surplus Soil for Underground Power Line)

  • 오기대;김대홍
    • 한국건설순환자원학회논문집
    • /
    • 제5권3호
    • /
    • pp.84-93
    • /
    • 2010
  • 지중전력선과 같은 원형 지하매설관의 경우 관의 하단부 다짐효율이 낮아 파손등과 같은 구조적 문제점에 항상 노출되어 있다. 이러한 문제점들 때문에 다양한 방법들이 강구되어 왔으며 그중 하나가 유동성이 뛰어난 저강도 콘크리트의 개발이다. 외국에서는 이미 오래전부터 연구개발을 진행하여 전력회사를 중심으로 이미 실용화 단계에와 있다. 하지만, 국내에서는 일반구조물에 대한 연구는 진행되었으나, 야간시간대 급속시공이 필요한 지중전력선 공사에 적용되는 급결 유동성 뒤채움재에 대한 연구는 최근에 이루어지기 시작했다. 본 논문에서는 고유동성을 지니고 급속 고화가 가능한 현장 굴착토를 활용한 유동성 뒤채움재에 대한 역학적 특성 및 3차례에 걸쳐서 실내모형 및 실물실험을 수행한 결과, 유동성은 교반시작 이후 약 9~15분내 타설 한계 유동성(160 mm)에 도달하는 것으로 확인되었고, 재료의 부력은 타설 초기에 급격히 발생하고 이후 점차 소산하는 것으로 확인되었으며, 그 값은 재료의 단위중량으로 계산한 이론부력의 약 70 %로 계측되었다. 본 연구에서 실험을 통해서 도출한 시공방법(배치플랜트를 이용한 타설, 스페이서 설치간격 1.8 m 및 타설 간격 2 m)을 적용시 시공품질, 작업성 및 구조적 안정성을 확보 할 수 있었다.

  • PDF

굴패각, 석탄회 및 굴착잔토를 이용한 무다짐 처리공법용 뒷채움재 개발 (Development of Flowable Backfill Material Using Waste Oyster Shell, Coal Ash, and Surplus Soil)

  • 김민진;왕설;이재주;이상호;김성배;김창준
    • 청정기술
    • /
    • 제19권4호
    • /
    • pp.423-429
    • /
    • 2013
  • 본 연구의 목표는 폐자원인 굴패각과 석탄회, 굴착잔토를 이용하여 경제성 있는 무다짐용 유동성 뒷채움재를 개발하는데 있다. 굴패각을 생석회(CaO)로 전환하는데 고온($800^{\circ}C$ 이상)의 에너지가 필요하였지만, 생석회와 석탄회의 포즐란 반응에 의해 생성된 고화물 공시체의 일축압축강도는 높지 않았다. 생석회와 고령토 또는 고로슬래그의 반응 생성물 공시체의 압축 강도를 측정하였다. 실험결과로부터 포즐란 반응을 통한 고화물 생성은 경제성이 없는 것으로 판명되었다. 굴패각($CaCO_3$)과 석탄회를 잔골재 개념으로 그 사용 가능성을 검토하였다. 굴패각과 시멘트 혼합물이 석탄회와 시멘트 혼합물보다 높은 강도를 나타내었다. 굴패각에 포함된 염분으로 인하여 콘크리트에 혼입되는 굴패각 양을 제한하는 것을 고려한다면, 시멘트, 굴패각, 석탄회 혼합물이 좋은 뒷채움재로 사용될 수 있을 것으로 판단되었다. 추가적으로 흙을 첨가하는 경우 고화물의 일축압축강도가 감소하였지만 최적화된 혼합비에서 뒷채움재 기준(일축압축강도와 유동성)을 모두 만족하는 결과를 나타내었다. 본 연구결과는 시멘트, 굴패각, 석탄회, 굴착잔토의 배합비를 최적화함으로써 경제성 있는 뒷채움재를 개발할 수 있다는 것을 보여준다.

Measuring the social effects of the origin labeling of beef in the Korean food service sector

  • Kim, Sounghun;Han, Jae-Hwan
    • 농업과학연구
    • /
    • 제46권2호
    • /
    • pp.323-333
    • /
    • 2019
  • In Korea, origin labeling is one of the main issues in the food service sector. Many restaurants presented the incorrect or no origin of the food material, and Korean consumers have kept complaining about it. Even though the origin labeling program was welcomed by consumers, the food service sector has claimed that there is an increasing cost due to the origin labeling program. It is an important issue to determine whether the origin labeling program is good for the social welfare; however, the specific effects of the origin labeling program have rarely been measured. The purpose of this study was to measure the effect of origin labeling of beef in the Korean food service sector. Through survey and model analyses, a few findings are presented. First, Korean consumers showed a positive willingness-to-pay for the origin labeling of beef. Especially, consumers without information on the origin of the beef showed a larger willingness-to-pay for the origin labeling. Second, the origin labeling of beef changed the price and quantity of beef, and this change became larger when the consumers had no information on the origin of the beef. The change in the marketing margin due to the origin labeling program also affected the changes in the price and quantity of the beef. Third, the origin labeling of beef increased the social welfare, which is the sum of the consumer surplus and producer surplus. And this increase of the social welfare became larger when the consumers had no information about the origin.

Pitfall in calibration development - "chance correlation + wishful thinking" - an example of pH determination in grass silages

  • Tillmann, Peter;Horst, Hartmut
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1275-1275
    • /
    • 2001
  • The pH value of grass silages is one important parameter to determine the quality of the forages. In an attempt to use NIRS spectra taken for other quality parameter of grass silage it has been shown that a good correlation between NIR spectra of the dried forage and pH value of the fresh forage could be determined. Further investigations revealed that the B coefficients of the pH value calibration were almost the same as the B coefficients of the sugar calibration multiplied with -1. And indead the pH value - in the fresh sample material - of the calibration set is strongly correlated with the sugar concentration - in the dried sample material. It is concluded that next to scientific tools in research the scientist and the user of NTRS equippment has to scrutinze his own work. Examples are given. NIRS is a powerfull technique, but pitfalls are present in surplus.

  • PDF