• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.452-457
• /
• 2011

The internal temperature of an operating room had to keep within $20^{\circ}C$. However, the doctor who is wearing operating gown and mask caused to rise temperature because of the thermal occurrence of dental LED light source. At first, the surgery environment is getting worse. And then last, it would increase bleeding rate by the expansion of patient's exposured blood vessel. A surgical operator can distribute the patient's tissue through such surgery environment, exactly. It can do accurate surgery. So, it gave to effect that surgical operator's eye condition is getting better and it could keep a mutual assistance system. For this research, we develop the LED dental light source module of high color rendition. It performed simulation for replacing established the method of Halogen lamp and Plazma lamp of light source. We analyzed intensity of illumination and the change of viability by changing the height of light source module.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.109-123
• /
• 2020

Objectives: The aims of this study were to review the standards and key components of the standards for disposable masks in Korea, the US, EU, Japan, and China and to evaluate the appropriateness of disposable masks during a virus pandemic. Methods: We reviewed the standards in the above countries and compared their key elements for each standard. For the second purpose, systemic paper gathering using key words like 'mask', 'respirator' 'virus', and 'coronavirus' in the PubMed search engine was performed. Fifty-three papers were selected and reviewed in regard to the appropriateness of test protocols with sodium chloride(NaCl) particles for virus filtration and the effectiveness against viruses. Results: The standards for masks are largely divided into two categories: US standards and EU standards. In Korea, the Ministry of Employment and Labor adapted the EU standards for workers and the Health Masks adopted the Ministry of Employment and Labor standards by the Ministry of Food and Drug Safety. Regarding airborne viral infections, WHO emphasizes only droplet infection, while many studies have shown that small particles enter the air through coughing or sneezing, which increases the possibility of airborne infection. Compared to other particles, various factors such as airborne viability and the ability to replicate the virus in the body are further involved in the virus's airborne infection rate. Airborne infection is classified into absolute air infection, preferential air infection, and opportunistic air infection. The NaCl-certified N95 mask showed good filtration efficiency against viruses and NaCl particles were proved to be a surrogate material for viruses. From this, KF94 is also expected to be effective in blocking viruses. Conclusion: The N95 test method could be used as a surrogate test method for virus filtration. N95-class masks have been found to effectively block viral infections in the air. However, surgical or medical masks are only partially effective against airborne virus infection though they could effectively block large droplet infection. However, most studies considered in this study targeted N95 in foreign countries and studies on masks actually used in Korea are very limited, so studies on microorganisms and reuse on domestic masks should be conducted in the future.

• 대한구순구개열학회지
• /
• 제11권1호
• /
• pp.37-48
• /
• 2008

Cleft lip and palate patients often develop maxillary retrusion due to the combined effects of the congenital deformity and the scar tissue after surgical repairs. Maxillary protraction in the cleft patients using orthopedic appliances (i.e. face mask) or distraction osteogenesis during early childhood helps to achieve more balanced skeletal harmony and favorable occlusion for future growth to occur. Kinds, indication, protocol for use of the traditional orthopedic appliances will be discussed. Also the facemask with miniplate system recently developed will be introduced.

• 대한소아치과학회지
• /
• 제23권4호
• /
• pp.859-866
• /
• 1996

It is a relatively rare clinical experience to see the impacted first molar. The first permanent molar is the key in normal occlusion. Abnormal eruption of the first permanent molars would inflict normal development of dental arches and give rise to abnormal root resorption of the adjacent teeth. Therefore, the abnormally erupted first permanent molars should be detected and treated early in order to obtain proper occlusal guidance in mixed dentition period. This report presents two cases on distally tilted and impacted mandibular first molars which were treated by surgical exposure and orthodontic traction using facial mask.

• Archives of Plastic Surgery
• /
• 제50권2호
• /
• pp.220-221
• /
• 2023

Microsurgical peripheral nerve repair is a technical and challenging procedure that requires thorough training prior to a real-life operating theater scenario. While the gold standard in training remains training on biological living peripheral nerve specimen, various inanimate models of nerve repair simulation have been described in the past years. The textile elastic band (TEB) obtained from a surgical mask was either covered with a fine silicone sheath or was left bare and was used afterward for end-to-end coaptation. The average diameter of the TEB was 2 mm, similar with the nerves in the distal hand and can be easily crafted out of accessiblematerials such as a surgicalmask and silicone sealant. The silicone that covers the TEB offers more fidelity to the simulation for microsurgical nerve coaptation. The TEB model offers an affordable, available, and easy-to-craft alternative to the existing models for peripheral nerve repair simulation and serves as a good initiation tool before moving on to biological specimens.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권1호
• /
• pp.53-60
• /
• 2009

Maxillary deficiency, anterior cross bite, constriction of maxillary arch, malaligned teeth are frequently observed in patients with cleft lip and palate. Surgery and orthodontics, combined intervention are needed to correct maxillary deficiency. Distraction osteogenesis that currently used has many advantages like less relapse tendency, more advancement of maxilla, capable in growing patients. In case 1, 18 years old girl with BCLP had severe midfacial deficiency and multiple missing of teeth. LeFort I osteotomy, followed by maxillary distraction osteogenesis utilizing rigid external distraction device(RED) system, was performed. After a 6-day latency period, distraction proceeded at a rate of 1mm per day (at 1st week, 1.5mm/day). Total advancement was 19mm. The RED device left in place for the additional 4 weeks for consolidation. After the RED device was removed, face mask was applied with elastic traction for 5 weeks. After achieving acceptable facial appearance and occlusion, orthodontic appliance was removed. The results after 4 years follow-up was sustained pretty well without aggravation of velopharyngeal function. In case 2, 22 years old man with UCLP had severe midfacial deficiency and palatally erupted upper 2nd premolars due to arch length discrepancy, but the anterior segment of maxillary did not show constriction and crowding. patient had no arch width discrepancy, crowding was concentrated on premolar region. Segmental LeFort I osteotomy was performed. After a 6 - day latency period, using internal distraction device, distraction proceeded at a 0.5mm per day(at 1st week, 0.75 - 1 mm/day). Total advancement was 15mm. After internal distraction device was removed, face mask was applied with elastic traction for 4 weeks. After surgical-orthodontic treatment, facial appearance and occlusion was improved pretty good, and after 46 months follow-up the result was retained well.

• 문화기술의 융합
• /
• 제3권2호
• /
• pp.15-20
• /
• 2017

본 연구는 국내 수도권, 충청권, 경상권의 3개 지역의 장례종사자를 대상으로 간염A형 바이러스, 간염B형 바이러스에 대해 백신 접종 군을 저위험성군으로, 접종하지 않은 군을 고위험성으로 분류하여, 개인보호물품의 착용정도에 대해 조사하고, 고위험성군 내의 감염보호물품 착용 유무에 따른 감염잠재위험도를 분석한 연구이다. 연구결과 A형간염 고위험군의 마스크 미착용률이 저위험군보다 3배 이상 높았으며, B형 간염 고위험군의 글러브 미착용률이 저위험군에 비해 2배 이상 높았다. 고위험군을 대상으로 한 개인보호물품 착용에 대한 연구에서 A형 간염에서 글러브와 마스크 미착용 장례종사자의 감염잠재위험도가 각각 4.23배, 3.5배로 매우 높음을 관찰할 수 있었다. 장례종사자의 잠재적 감염위험성이 증가되는 것은 결과적으로 유가족 등 국민의 감염위험성이 증대될 수 있으며, 국가적 공중보건에 위해요인이 될 것으로 결론내릴 수 있었다. 장례종사자는 반드시 간염에 대한 백신접종과 개인보호장비를 의무화하고, 영업자에는 주기적으로 장례종사자 질병감염 상항을 모니터링하고, 장례종사자가 입었던 가운, 마스크 등의 위생처리 등 보건위생관련에 대한 정책적 노력이 필요하다고 판단된다.

• 대한치과의사협회지
• /
• 제49권4호
• /
• pp.219-226
• /
• 2011

Snoring and obstructive sleep apnea (OSA) are common sleep disordered breathing conditions. Habitual snoring is caused by a vibration of soft tissue of upper airway while breath in sleeping, and obstructive sleep apnea is caused by the repeated obstructions of airflow for a sleeping, specially airflow of pharynx. Researchers have shown that snoring is the most important symptom connected with the obstructive sleep apnea syndrome The treatment is directed toward improving the air flow by various surgical and nonsurgical methods. The current surgical procedures used are uvulopalatopharyngoplasty(UPPP), orthognathic surgery, nasal cavity surgery. Among the nonsurgical methods there are nasal continuous positive air pressure(CPAP), pharmacologic therapy. weight loss in obese patient, oral appliance(sleep splint). Sleep splint brings the mandible forward in order to increase upper airway volume and prevents total upper airway collapse during sleep. However, the precise mechanism of action is not yet completely understood, especially aerodynamic factor. The aim of this study evaluated the effect of conservative treatment of snoring and OSAS by sleep splint through measured aerodynamic change by an aerophone II. We measured a airflow, sound pressure level, duration, mean power from overall airflow by aerophone II mask. The results indicated that on a positive correlation between a decrease in maximum airflow rate and a decrease in maximum sound pressure level, on a negative correlation between a decrease in maximum airflow rate and a increase in duration.

• 대한치과교정학회지
• /
• 제50권5호
• /
• pp.346-355
• /
• 2020

The treatment of skeletal Class III malocclusion in adolescents is challenging. Maxillary protraction, particularly that using bone anchorage, has been proven to be an effective method for the stimulation of maxillary growth. However, the conventional procedure, which involves the surgical implantation of mini-plates, is traumatic and associated with a high risk. Three-dimensional (3D) digital technology offers the possibility of individualized treatment. Customized mini-plates can be designed according to the shape of the maxillary surface and the positions of the roots on cone-beam computed tomography scans; this reduces both the surgical risk and patient trauma. Here we report a case involving a 12-year-old adolescent girl with skeletal Class III malocclusion and midface deficiency that was treated in two phases. In phase 1, rapid maxillary expansion and protraction were performed using 3D-printed mini-plates for anchorage. The mini-plates exhibited better adaptation to the bone contour, and titanium screw implantation was safer because of the customized design. The orthopedic force applied to each mini-plate was approximately 400-500 g, and the plates remained stable during the maxillary protraction process, which exhibited efficacious orthopedic effects and significantly improved the facial profile and esthetics. In phase 2, fixed appliances were used for alignment and leveling of the maxillary and mandibular dentitions. The complete two-phase treatment lasted for 24 months. After 48 months of retention, the treatment outcomes remained stable.

• 대한심미치과학회지
• /
• 제10권1호
• /
• pp.30-45
• /
• 2001

In recent years, clinicians' and dentists' esthetic demands in dentistry have increased rapidly. The ultimate goal in modern restorative dentistry is to achieve "white" and "pink" esthetics in the esthetically important zones. Therefore, modern esthetic dentistry involves not only the restoration of lost teeth and their associated hard tissues, but increasingly the management and reconstruction of the encasing gingiva with adequate surgical techniques. Interdental space are filled by interdental papilla in the healthy gingiva, preventing plaque deposition and protecting periodontal tissue from infection. This also inhibits impaction of food remnants and whistling through the teeth during speech. These functional aspects are obviously important, but esthetic aspects are important as well. Complete and predictable restoration of lost interdental papillae remains one of the biggest challenges in periodontal reconstructive surgery. One of the most challenging and least predictable problems is the reconstruction of the lost interdental papilla. The interdental papilla, as a structure with minor blood supply, was left more or less untouched by clinicians. Most of the reconstructive techniques to rebuild lost interdental papillae focus on the maxillary anterior region, where esthetic defects appear interproximally as "black triangle". Causes for interdental tissue loss are, for example, commom periodontal diseases, tooth extraction, excessive surgical periodontal treatment, and localized progressive gingiva and periodontal diseases. If an interdental papilla is absent because of a diastema, orthodontic closure is the treatment of choice. "Creeping" papilla formation has been described by closing the interdental space and creating a contact area. In certain cases this formation can also be achieved with appropriate restorative techniques and alteration of the mesial contours of the adjacent teeth. The presence of an interdental papilla depends on the distance between the crest of bone and the interproximal contact point, allowing it to fill interdental spaces with soft tissue by altering the mesial contours of the adjacent teeth and positioning the contact point more apically. The interdental tissue can also be conditioned with the use of provisional crowns prior to the definitive restoration. If all other procedures are contraindicated or fail, prosthetic solutions have to be considered as the last possibility to rebuild lost interdental papillae. Interdental spaces can be filled using pink-colored resin or porcelain, and the use of a removable gingival mask might be the last opportunity to hide severe tissue defects.