• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1503-1506
• /
• 1997

The main fault in this interface is that power cable insulating materials are mainly composed of a double layered structure, XLPE/EPDM laminates in cable joint. In this paper, we instituted the interface of normal and degassed XLPE/EPDM and then investigated the breakdown and conduction characteristics as a function of heat treatment time. The results showed that conduction and breakdown strength was influenced by volatile crosslinking by-products which remained inside the insulating material during the production of XLPE and EPDM, especially during heat treatment process. And micro voids and surface roughness also influenced the conduction current and breakdown strength.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.134-142
• /
• 2009

Organo bifunctional silane (TESPD) is added into silica containing NR and its effects are investigated with respect to the vulcanization properties, the processability, and the physical properties. The addition of the TESPD into silica filled NR compound increases the degree of crosslinking by formation of a strong 3-dimensional network structure with silica surface via coupling reaction, which results in an improved mechanical property. It also improves the processabilities compared to the Control compound.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.252-259
• /
• 2009

Bifunctional silane (TESPD) is added into silica filled SBR compound and its effects with respect to the vulcanization properties, the processability, and the physical properties are investigated. The addition of the TESPD into silica filled SBR compound increases the degree of crosslinking by formation of a strong 3-dimensional network structure with silica surface via coupling reaction, which results in an improved mechanical property. It also improves the processabilities compared to the Control compound.

• Elastomers and Composites
• /
• v.53 no.3
• /
• pp.136-140
• /
• 2018

In this study, research was conducted into the manufacture of thermally expandable microspheres for automotive underbody coatings and applications in industry. In particular, the relationship between heat resistance and the ratio of crosslinking agents and initiators in the manufacture of the thermally expandable microspheres was investigated. We focused on the results with various cross-linking agents; our aim was to make the walls of the microspheres thicker to solve the problem of reductions in size caused by shrinkage when the microspheres are heated to $T_m$ ($T_{max}$). We observed the sectional thickness and surface of the samples with thicker walls. The thick thermally expandable microspheres showed reduced shrinkage and excellent stability in spite of prolonged exposure to heat.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.10
• /
• pp.1738-1744
• /
• 2001

본연구의 목적은 반응성 염료를 이용한 텐셀섬유의 피브릴화 조절 효과를 표면 형태, 감량율, 역학적 성질 및 태의 변화의 측면에서 고찰하는데 있다. 반응성 염료에 의한 가교는 섬유의 비결정 영역의 구조를 변화시켜 피브릴화를 억제하였으며 또한 효소의 작용에 영향을 주어 감량율을 감소시켰다. 반응성 염료에 의한 가교는 역학적 성질 중 특히 전단강성, 압축에너지, 압축레질리언스를 증가시켰다. 염색후 효소처리한 시료는 다른 시료보다 numeri와 fukurami 값이 높아 더 나은 종합태를 보였다. 공정순서에 따라 약간씩 차이가 있는 촉감을 나타냈다.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.8
• /
• pp.696-699
• /
• 1996

Silicate and borosilicate gels were prepared by the sol-gel process and thermally treated in the 150-850 ℃ temperature range. Solid-state 1H MAS and 29Si CP/MAS NMR spectroscopy were used to investigate the effects of heat treatments on the silicate gel to glass conversion process. The 1H NMR isotropic chemical shifts and the relative intensities of hydrogen bonded and isolated silanol groups have been used to access the information concerning the dehydration process on the silicate gel surface. The 29Si NMR isotropic chemical shifts affected by the local silicon environment have been used to determine the degree of crosslinking, i.e. the number of siloxane bonds. These NMR results suggest that the silicate gel to glass conversion process is occurred by two stages which are dependent on the temperature; (1) the formation of particles up to 450 ℃ and (2) the formation of large particles by aggregation of each separated single particle above 450 ℃. In addition, the effects of B atom on the formation of borosiloxane bonds in borosilicates have been discussed.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.493-498
• /
• 1995

Ultrathin networks of itaconic acid copolymers and poly(allylamine) were produced by a Langmuir-Blodgett (LB) technique employing a double-chain amine as a monolayer template which was subsequently removed by extraction after thermal crosslinking. Itaconic acid copolymers used were copoly (itaconic acid-ethyl vinyl ether) and copoly (itaconic acid-n-butyl vinyl ether). The polyion-complexed monolayers of three components consisting of template amine, itaconic acid copolymer and poly (allylamine) were formed at the air-water interface. The Langmuir film properties have been studied by the surface pressure-area isotherm and fluorescence microscopy. The monolayers were transferred on solid substrates and were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy (SEM). Two-dimensional polymer networks were formed through imide or amide linkages by heat treatment under vacuum. The heat-treated films were extracted with chloroform after immersion in aq. sodium chloride to remove the template amines. SEM observation of a LB film on a porous fluorocarbon membrane filter with pore diameter of 0.1 μm showed covering of the pores by six layers in the polyion complex state.

• Radioisotope journal
• /
• v.21 no.4
• /
• pp.46-54
• /
• 2006

Biocompatible and biodegradable hydrogels based on carboxymethyl cellulose(CMC) and polyethyleneglycol(PEG) were prepared far physical barriers for preventing surgical adhesions. These interpolymeric hydrogels were synthesized by a gamma irradiation crosslinking technique. The 1Scmxl.Scm of cecal serosa and adjacent abdominal wail were abraded with bane burr until tbe serosal surface was disrupted and hemorrhagic but not perforated. and the serosa of tbe cecum was sutured to the abdominal wall in 5mm apart from the injured sire. The denuded cecum was covered with either CMC/PEG hydrogels or solution from CMC/PEG hydrogel. Control rat serosa was not covered. Two weeks later. the rats were sacrificed and adhesion was scored on a 0-5 scale. No treatment showed the significantly higher incidence of adhesions than either CMC/BEC hydrogels or solution from CMC/PEG hydrogel. In conclusion, these studies demonstrate that CMC/BEG hydrogels have a function of prevention of intra abdominal adhesion in a rat model.

• Korean Journal of Materials Research
• /
• v.31 no.8
• /
• pp.427-432
• /
• 2021

This study uses silicone monomer, DMA, crosslinking agent EGDMA, and initiator AIBN as a basic combination to prepare hydrogel lenses using fluorine-based perfluoro polyether and iron oxide and zinc oxide nanoparticles as additives. After manufacturing the lens using iron oxide nanoparticles and zinc oxide nanoparticles, the optical, physical properties, and polymerization stability are evaluated to investigate the possibility of application as a functional hydrogel lens material. As a result of this experiment, it is found that the addition of the wetting material containing fluorine changes the surface energy of the produced hydrogel lens, thereby improving the wettability. Also, the addition of iron oxide and zinc oxide nanoparticles satisfies the basic hydrogel ophthalmic lens properties and slightly increases the UV blocking performance; it also increases the tensile strength by improving the durability of the hydrogel lens. The polymerization stability of the nanoparticles evaluated through the eluate test is found to be excellent. Therefore, it is judged that these materials can be used in various conditions as high functional hydrogel lens material.

• Fire Science and Engineering
• /
• v.22 no.2
• /
• pp.44-48
• /
• 2008

In this paper, we measured a contact angle, surface resistivity and XPS to study the thermal aging characteristics of the epoxy resin for cast resin transformer. As a result of this experiment, we found that the contact angle increases up to $200^{\circ}C$ as it causes a re-crosslinking on the surface, but starts decreasing at $250^{\circ}C$ as it causes heat condensation. As a result of examining the oxygen/carbon peaks through the XPS analysis, we obtained a higher oxygen peak vs. carbon in the first untreated sample, but it showed the opposite trend after heat treatment. That rise in the carbon peak continued up to $200^{\circ}C$, but decreased again at the temperatures above. That's because it kept forming a stable surface structure up to $200^{\circ}C$ but its carbon combination got destroyed due to a rapid oxidization at $250^{\circ}C$. And a conduction path was formed easily with the hydrophile property caused by rapid surface activation.