• Elastomers and Composites
• /
• 제51권2호
• /
• pp.128-137
• /
• 2016

The effect of the surface area of silicas on their reinforcing performance to styrene-butadiene rubber (SBR) compounds was systematically investigated. The feasibility of the Brunauer-Emmett-Teller surface area ($S_{BET}$) as a parameter representing the characteristics of the silicas was discussed compared to the mesopore volume, c value, oil absorption, and uptake of silane. The increase in $S_{BET}$ of silicas caused a considerable increase in Mooney viscosity, minimum torque, and hysteresis loss of the silica-filled SBR compounds, while significantly enhancing their abrasion property. These changes were explained by the attrition between the hydrophilic silica surface and the hydrophobic rubber chains. As expected, the change in $S_{BET}$ did not induce any remarkable changes in the cure, processing, tensile, and dynamic properties of the silica-filled SBR compounds because the crosslinking density of the rubber chains mainly determined these properties.

• 한국식품과학회지
• /
• 제28권3호
• /
• pp.573-579
• /
• 1996

Epichlorohydrin과 반응시켜 제조한 가교 결합 감자전분의 이화학적 성질을 조사하였다. 가교화 반응의 수율은 평균 85.2%, 가교화도는 epichlorohydrin 첨가량이 전분 건량의 0.005%일 때 2400 AGU/CL이고 0.01% 증가시 가교결합 1개 당 200개의 무수포도당 단위씩 감소하였다. 가교화에 의해 일반성분 중 평형 수분함량, 조단백, 회분함량이 감소하였다. 천연 및 가교결합 감자전분의 인 함량은 $0.07{\sim}0.09%$로 동부 전분 0.01%에 비해 높았다. 물결합능력은 가교화도가 증가함에 따라 증가하였으며 가교화도가 2100 AGU/CL일 때 85.2%로 동부 전분 86.3%와 비슷한 수준에 도달하였다. 전분의 요오드 흡착 특성은 천연감자 전분이 594nm, 동부 전분이 598 nm에서 최대흡수파장을 나타냈으며, 가교화에 의해 580 nm 근처로 이동하였다. 청가로부터 계산한 아밀로오스 함량은 감자 전분이 21.1%, 동부 전분이 27.7%이었으며, 가교결합 감자 전분은 알카리에 의한 완전 호화 팽윤이 억제되어 아밀로오스 함량 측정은 불가능하였다. 감자 전분 입자는 작은 것은 구형, 큰 것은 타원형이 많았으며, 크기는 $8{\sim}57{\mu}m$로 타원형의 동부 전분 $7{\sim}23{\mu}m$보다 컸으며, 가교화도가 증가함에 따라 크기 분포는 약간 큰 쪽으로 이동하였다. 천연 감자 전분의 표면은 매끄러웠으나, 가교반응에 의해 표면이 녹아내리듯 거칠어졌다. X-ray 회절양상은 가교화에 의해 변하지 않아 천연 감자 전분과 동일한 B형을 나타냈으며, 상대결정화도는 $34.0{\sim}36.1%$로 천연 감자 전분의 34.1%와 비슷한 수준을 유지하였다. 시차주사열량계로 측정한 호화온도(Tp)는 천연 감자 전분의 $43.1^{\circ}C$, 가교결합 감자 전분은 $62.9^{\circ}C{\sim}63.4^{\circ}C$로 거의 변화가 없었으며, 호화엔탈피($-{\Delta}H_G$)는 $10.63{\sim}11.32J/g$으로 천연 감자 전분과 비슷하였다. X-ray 회절도와 시차주사열량계 결과로부터 가교결합은 전분 입자의 비결정질 영역에서 이루어졌다고 결론지을 수 있다.

• 폴리머
• /
• 제34권6호
• /
• pp.565-573
• /
• 2010

IPN 구조를 가지는 감습성 고분자 전해질로 사용하기 위하여 디브로모알칸과 가교가 가능한 copoly(2-(dimethylamino) ethyl methacrylate)(DAEMA)/butyl acrylate(BA)와 광가교가 가능한 copoly(methyl methacrylate) (MMA)/BA/2-(cinnamoyloxy)ethyl methacryate(CEMA)를 제조하였다. 전극의 기재 표면에 광조사에 의한 IPN-감습성 전해질의 부착을 위하여 3-(triethoxysilyl)propyl cinnamate(TESPC)을 전극표면에 처리하였다. IPN 구조의 감습성 고분자 필름은 copoly(DAEMA/BA), copoly(MMA/BA/CEMA) 및 1,4-dibromobutane(DBB) 가교제의 혼합 용액에 침적한 후에 UV 조사와 동시에 가열하여 제조하였다. IPN-전해질 고분자의 전극 기재와의 부착은 광화학적 $[2{\pi}+2{\pi}]$ 환화반응에 의하여 진행하였다. 얻어진 습도센서는 20~95%RH의 영역에서 매우 높은 감도와 1.5%RH 이하의 작은 히스테리시스를 보여주었다. 또한, 33~94%RH 사이에서 가습과 제습과정의 응답 및 회복 속도는 각각 48초와 65초로 나타나 매우 빠름을 알 수 있었다. 그 밖에 감습액 중의 공중합체의 농도, 가교제의 양, 가교반응 시간 등이 내수성을 포함한 감습성질에 미치는 영향을 조사하였다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.33-34
• /
• 2006

The graft copolymer consisting of poly(N-isopropylacrylamide) (PNIPAAm) and single-stranded DNA was prepared. Interestingly, the copolymer was found to form nanoparticles above physiological temperature. We found that non-crosslinking aggregation of the nanoparticles was induced by the hybridization of the surface-bound DNA with the full-match complementary DNA, but not with one-base mismatch. The core material is not restricted to PNIPAAm; DNA-functionalized gold nanoparticle was found to show a similar aggregation induced only by the fully-complementary DNA, resulting in rapid color change within 3 min at ambient temperature. This methodology is general in principle and applicable for wide variety of clinical gene diagnosis.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.30-41
• /
• 1997

A purpose of this research is to prove unknown relation -ship between finish bath pH and crosslinking. In pursuit of these goals, we have treated 100% cotton broad cloth with PTCA and BTCA at different pH values. They were used with H$_{3}$PO$_{4}$, NaH$_{2}$PO$_{2}$, NaH$_{2}$PO$_{4}$, Na$_{2}$HPO$_{4}$, Na$_{3}$PO$_{4}$, catalysts to produce nonformaldehyde fabrics finishes. Treatments were applied to all cotton fabrics using a parletry-cure process. For the fully understood on the relationship of finish bath pH effect and cotton cellulose esterification, the relative concentrations of chemical species were calculated from ionization constants. The effect of pH on the cotton cellulose ester was investigated using Fourier transform infrared spectra, the surface area measurement by BET method and wrinkle recovery analysis. Results of differential FT-IR spectra and their relative concentration analysis were compared with those of catalyst treated controls. FT-IR and wrinkle recovery data indicated that the esterfication by polycarboxylic acids is pridependent. A similar phenomenon also occurred when a phosphate or hypophosphite was used. Therefore, it is necessary to choose the optimum pH range of a finishing bath in order to achieve the most effective esterification.

• 공업화학
• /
• 제4권1호
• /
• pp.188-195
• /
• 1993

생체의료용 재료로서 응용 가능한 고분자 전해질복합체와 그라프트 공중합체를 수용성 고분자 유도체로부터 제조하였다. 고분자 전해질 복합체들은 카르복시메틸 셀룰로오즈(CMC)와 젤라틴으로부터 제조하였다. 그라프트 공중합체는 메틸셀룰로오즈(MC)에 아크릴산을 그라프트반응시켜 합성하였고, 이 그라프트 공중합체와 젤라틴의 고분자 전해질 복합체도 제조하였다. 그라프트 공중합체와 고분자 전해질 복합체들을 화학가교법과 열처리법으로 제조시 최적조건들을 조사하였다. 예비실험 결과 이들 재료들이 생체의료용 재료로서의 응용 가능성이 있는 것을 알았다.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1513-1520
• /
• 2013

Novel chitosan (CS) based membrane networks were developed by solution casting and followed by crosslinking with different crosslinkers such as glutaraldehyde, urea-formaldehyde, and thiourea-formaldehyde. The developed membrane networks were designated as CS-GA, CS-UF and CS-TF. Crosslinking reaction of CS membranes was confirmed by Fourier transform infrared spectroscopy. Membrane rigidity and compactness were studied by the differential scanning calorimetry. The surface morphology of CS membranes was characterized by scanning electron microscopy. The sorption behaviour with respect to contact time, initial pH and initial metal ion concentration were investigated. The maximum adsorption capacity of CS-GA, CS-UF and CS-TF sorbents was found to be 1.03, 1.2 and 1.18 mM/g for $Cu^{2+}$ and 1.48, 1.55 and 2.18 mM/g for $Ni^{2+}$ respectively. Swelling experiments have been performed on the membrane networks at $30^{\circ}C$. Desorption studies were performed in acid media and EDTA and it was found that the membranes are reusable for the metal ion removal for three cycles. The developed membranes could be successfully used for the separation of $Cu^{2+}$ and $Ni^{2+}$ metal ions from aqueous solutions.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.135-140
• /
• 2005

Poly(vinyl alcohol) (PVA) membranes crosslinked with poly(acrylic acid-co-maleic acid) (PAM) were prepared to investigate the effect of aging on their morphology by swelling them for up to 7 days. PAM was used both as a crosslinking agent and as a donor of the hydrophilic-COOH group. A $30 wt\%$ weight loss of the dry membrane was observed in the swelling test after 6 days. The surface of the membrane was dramatically changed after the swelling test. The surface roughness of the PVA/PAM membrane was increased, as determined by atomic force microscopy (AFM). The swelling loosened the polymer structure, due to the release of the unreacted polymer and the decomposition of the ester bond, thereby resulting in an increase in the free volume capable of containing water molecules. The water molecules present in the form of free water were determined by differential scanning calorimetry (DSC). The fraction of free water increased with increasing swelling time. The swelling of the membrane may provide space for the transport of protons and increase the mobility of the protonic charge carriers. The proton conductivity of the membranes measured at T= 30 and $50^{\circ}C$ was in the range of $10^{-3} to 10^{-2} S/cm$, and slightly increased with increasing swelling time and temperature.

• 폴리머
• /
• 제28권4호
• /
• pp.291-297
• /
• 2004

수용성 키토산의 농도와 가교제 (글루타알데히드)의 양을 변화시키면서 미네랄오일 내에서 키토산용액의 유화법에 의해 수용성 키토산 미세구를 제조하였다. 그러고 약물이 봉입되어진 수용성 키토산 미세구의 분해에 따른 형태의 변화, 약물의 봉입효율, 약물 방출 거동과 같은 물리화학적 특성을 규명하였다. Norfloxacion 이 봉입된 수용성 키토산 미세구는 표면의 약물에 의해 나타나는 과량의 약물 방출이 없는 높은 약물 봉입 함량을 보였다. 표면에 약물이 존재하지 않음을 선 회절 분석으로 확인하였다. 수용성 키토산 미세구의 분해 특성과 약물방출 거동을 관찰한 결과 가교제의 양이 약물의 봉입량, 방출, 그리고 분해에 중요한 역할을 하는 것을 확인하였다. 수용성 키토산 미세구는 가교제의 양이 증가함에 따라 분해속도가 느렸으며, 이와 동시에 약물이 천천히 방출되었음을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.470-477
• /
• 2018

With a highly functional methyl vinyl silicone rubber (VMQ) matrix and filler materials of $B_4C$, PbO, and benzophenone (BP) and through powder surface modification, silicone rubber mixing, and vulcanized molding, a flexible radiation shielding and resistant composite was prepared in the study. The dispersion property of the powder in the matrix filler was improved by powder surface modification. BP was added into the matrix to enhance the radiation resistance performance of the composites. After irradiation, the tensile strength, elongation, and tear strength of the composites decreased, while the Shore hardness of the composites and the crosslinking density of the VMQ matrix increased. Moreover, the composites with BP showed better mechanical properties and smaller crosslinking density than those without BP after irradiation. The initial degradation temperatures of the composites containing BP before and after irradiation were $323.6^{\circ}C$ and $335.3^{\circ}C$, respectively. The transmission of neutrons for a 2-mm thick sample was only 0.12 for an Am-Be neutron source. The transmission of ${\gamma}$-rays with energies of 0.662, 1.173, and 1.332 MeV for 2-cm thick samples were 0.7, 0.782, and 0.795, respectively.