• 제목/요약/키워드: surface washing

검색결과 393건 처리시간 0.031초

고등학교 급식시설 운영실태 및 ATP Bioluminescence를 이용한 위생상태 조사연구 (Evauation of Management & Hygienic Status of High School Foodservice using ATP Bioluminescence Assay)

  • 계승희;황성희
    • 한국식품영양학회지
    • /
    • 제30권3호
    • /
    • pp.515-524
    • /
    • 2017
  • An investigation was conducted to evaluate the hygienic status of 53 high school foodservice systems in Gyeonggi province by using hygiene management guide checklist, ATP bioluminescence assay of food utensils were conducted during process. The 5 hygiene management guide checklist groups about personal hygiene, cooking facilities control, cross contamination control, cook and storage control, management control were checked by experts and had good grades but there were some inadequate behaviors on observation. Total cleaning levels were inadequate, including hand, rubber gloves, aprons, knives, food tray, machine and instruments. The possibility of cross contamination is also noted in handles for refrigerators, ovens, food dryers, hand washing. It was also noted that there were too much work on the nutritionist and cook, additional personnel need to be added. lack of space, deterioration of facilities were identified in some high school foodservice systems. ATP bioluminescence assay was conducted on surface of food facilities, ATP ranged $1,393{\pm}5,041.2RLU$ on yellow gloves, $244{\pm}258.7RLU$ on pink gloves, $3,780{\pm}11,418.6RLU$ on apron, $49,056{\pm}62,831.4RLU$ on refrigerator grip, $41,422{\pm}61,259.8RLU$ in oven, $31,407{\pm}41,344.9RLU$ on hand cleaning board.

어린이 급식소의 배식용기 표면에 대한 ATP(Adenosine Triphosphate) 위생 모니터링 가이드라인 설정 (Setting Guidelines for ATP Bioluminescence Hygiene Monitoring of Distribution Trays in Used Children's Foodservices)

  • 문혜경
    • 대한영양사협회학술지
    • /
    • 제26권4호
    • /
    • pp.243-253
    • /
    • 2020
  • The purpose of this study was to set new guidelines for adenosine triphosphate (ATP) bioluminescence hygiene monitoring of distribution trays at children's foodservices. Five dietitians visited 223 foodservices (95 institutional, 128 small) to examine whether they adhered to the norms of 'Keeping distribution tray sanitary by washing/sanitizing' and 'Performing food distribution in a clean and appropriate way'. In this visit, dietitians swabbed 100 ㎠ area of the distribution trays twice, once for obtaining ATP measurements and the second time for Aerobic Plate Counts (APC) using 3M Petrifilm Plates. Chi-square test and ANOVA were applied using SPSS 23.0 software. SPSS 23.0 was used to conduct graphical and statistical analysis of the raw data of ATP measurements, which were further transformed by a Box-Cox transformation. The mean of APC from all the subjects inspected was 3.8×102±2,102.0 CFU/100 ㎠. A total of 208 (93.3%) trays were observed within the acceptable limits of APC (Pass<5.0×102 CFU/100 ㎠). APCs taken at institutional foodservices showed significantly lower levels (1.4×102±600.0 CFU/100 ㎠, P<0.01) compared to the small foodservices (5.5×102±2,718.7 CFU/100 ㎠). No significant differences were observed between the two groups in ATP measurements and in the performance rate of 2 checklist items. As against the 93.3% APC adequacy from the total subjected inspection, total ATP adequacy (Pass≤300 RLU/100 ㎠) was only 71.7%. Therefore, more practical guidelines should be prepared for the assessment of the hygiene of distribution trays. In the graphical and statistical analysis, levels below 250 RLU/100 ㎠ was considered 'Pass', while equal to or greater than 350 RLU/100 ㎠ was considered 'Fail' for distribution trays.

활 전복 수입에 의한 전복허피스바이러스감염증 (abalone herpes-like virus) 유입 위험평가 (A Stochastic Model to Quantify the Risk of Introduction of Abalone Herpes-like Virus Through Import of Abalones)

  • 박선일
    • 한국임상수의학회지
    • /
    • 제31권1호
    • /
    • pp.40-45
    • /
    • 2014
  • Abalone herpes-like virus (AbHV) is a fatal disease of abalones that impose severe economic impacts on the industry of infected regions due to high mortality. The aim of this study was to quantify the risk of introducing AbHV into Korea through the importation of live abalones for human consumption by import risk analysis (IRA). Monte Carlo simulation models were developed to provide estimates of the probability that a ton of imported abalone contains at least one AbHV-infected individual, using historical trade data and relevant literatures. A sensitivity analysis with 5,000 iterations was also conducted to determine the extent to which input parameters affect the outcome of the model. Although many uncertainties were present in the data, the results indicated that, if 5,000 tons of abalone were imported from a hypothetical exporting country with low prevalence of AbHV (model 1), there would be at least one AbHV-infected abalones in 4,816 of those tons (96.3%), while there would be at least one AbHV-infected abalones in 100% of those tons imported from country with high prevalence (model 2). Sensitivity analysis indicated that for model 1, prevalence was the strongest influence factor on the predicted number of infections. For model 2, background mortality and washing to reduce the risk of surface contamination during processing were the major contributing factors. Risk management strategies need to be enforced to reduce the risk of AbHV introduction in that at least one infected abalone would remain in a consignment from country even with a low prevalence of AbHV infection. The methodology and the results presented here will contribute to improve the development of AbHV management program, and with more accurate data this IRA model will aid science-based decision-making on mitigation strategies to reduce the risk of AbHV introduction in Korea.

구아바 잎 추출액을 이용한 직물의 천연염색(I) - 구아바 잎 추출액의 특성과 견직물에 대한 염색성 - (Natural Dyeing of Fabrics with Guava (Psidium guajava L.) Leaf Extract - Characteristics of Guava (Psidium guajava L.) Leaf Extract and Dyeability with Silk Fabrics -)

  • 한미란;이정숙
    • 한국의류산업학회지
    • /
    • 제13권5호
    • /
    • pp.778-789
    • /
    • 2011
  • The natural dyeing of silk fabrics with guava leaf extract was investigated. Mixed components of flavonoid and tannin seem to be the components of guava leaf extract. The temperature and time for dyeing of silk fabrics with guava leaf extract were $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. The dyeing equilibrium was shown at the fourth time of repeated dyeing. The highest K/S value was recorded at pH 3. Fe-mordanted fabrics showed the highest K/S value. High K/S values were shown in the post-mordanting of dyed fabrics at $40^{\circ}C$ and the pre-mordanting of dyed fabrics at $90^{\circ}C$. After repeated dyeing and mordanting, various color change occurred with mordant treatment. Surface colors were changed to YR color in alkaline water extract and to Y color in acidic water and ethanol extract, respectively. The washing fastness was level 3-4 for Sn-mordanted fabrics and level 4 for Fe-mordanted fabrics, and the dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness was satisfactory with level 3-4. The light fastness was above level 4 only when Fe-mordanting was conducted, and the rest of dyed fabrics was not fast enough. In the antibacterial activity, the powder of guva leaf extract showed 99.9% of high antibacterial activity and Staphylococcus aureus showed 99.6% in dyed fabric. All dyed fabrics showed higher deodorization and UV protection rate than control fabric.

불소도포가 상아질 접착에 미치는 영향 (EFFECT OF FLUORIDE APPLICATION ON DENTIN BONDING)

  • 권형조;박진훈;조규증
    • Restorative Dentistry and Endodontics
    • /
    • 제20권1호
    • /
    • pp.113-128
    • /
    • 1995
  • The purpose of this study was to investigate the effect of stannous fluoride on the dentin bonding with three kinds of commercially available dentin bonding systems containing different adhesive monomers. Dentin specimens with exposed labial dentin prepared from freshly extracted bovine mandibular anterior teeth were divided into experimental and control groups. The specimens of experimental groups were bonded with dentin bonding systems and composite resins including All bond 2 ㅡ& Bisfil, Scotchbond Multi-Purpose & Z100, and Denthesive II Charisma after 2 % stannous& fluorided application for S minutes and washing for 1 minute. The specimens of control groups were bonded with the same dentin bonding systems and composite resins as used in the experimental groups. After bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, the tensile bond strength and cohesive failure rate were measured, and then the pretreated dentin surfaces and the fractured dentin surfaces were examined under scanning electron microscope. The results were as follows : Mean bond strength of stannous fluoride applied groups of All bond 2, Scotchbond MP, and Denthesive II were 2.5MPa, 1.1MPa, and 1.1MPa respectively, and those of control groups were 7.5MPa, 8.1MPa, and 4.6MPa. Bond strength values of stannous fluoride applied groups were significantly lower than those of the control groups(p<0.05). SEM findings of dentin surfaces after stannous fluoride application demonstrated an appearance of partially remained smear layer and smear plugs inspite of pretreatment with 10 % phosphoric aicd or maleic acid solution, and an appearance of smear layer covered surface under Denthesive II priming. But those of control groups commonly showed clean dentin surfaces without smear layer and smear plugs. On SEM observation of the fractured dentin-resin interface, while most of the specimens of stannous fluoride applied groups showed adhesive failure mode, those of All bond 2 and Scotchbond MP control groups showed mainly adhesive-cohesive mixed failure mode, and mainly adhesive failure mode in Denthesive II control group.

  • PDF

기업체 식당종사자의 근골격계 부담 작업에 대한 위험성 평가 (Risk Assesment in the loaded works of muscular skeletal disorder for company attached to dining workers)

  • 이송권;유왕근;이정희;임무혁;박만철;차상은;기윤호
    • 한국산업보건학회지
    • /
    • 제17권2호
    • /
    • pp.101-110
    • /
    • 2007
  • This study was performed to find out hazardous factors in the loaded works of muscular skeletal disorders(MSDs) for four company attached to dining workers from October 2005 to June 2006. The results are summarized as follows. 1. 42.5% of workers in study group were 40-50 years old, and females were higher than males, and the average of body weight was 70kg, 57kg in males and females, respectively. Working time per day was mostly 7-9hours, and the rate of worker who had never education and training was 46%. 2. The upper part and right part of body were higher than lower part and left part in symptoms of muscular skeletal disorders. Body parts which complained of symptoms were the order of right shoulder(55%), right arm(54%), right hand,(40%) waist(35%), leg(25%), and neck(24%). 3. The results of evaluation in the loaded works of muscular skeletal disorders to cooking, dish supply, preparing side dish, and washing the dishes and cleaning the floor of cooking room using RULA and OWAS checklists was action level 4(potential hazards, needs of change workplace), and the result of evaluation using back compressive force needed control measures as 779.27 lbs~1,274.04 lbs. In a view point of the result of this study, large dining rooms should be designed by ergonomic technology for the work surface height, width, and depth. The height of carrying car should be lower to 70cm, and repetitiveness and handling weight should be reduced by mechanical means, and education and training also should be performed for all of workers positively.

토양.지하수오염원 관리우선순위 개략평가기법 개발 (Development of Preliminary Assessment Methodology for Priority Listing of Soil and Groundwater Contamination Sources)

  • 정승우;김영주;김재훈;황상일
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제16권6호
    • /
    • pp.106-112
    • /
    • 2011
  • This study developed preliminary assessment methodology for priority listing of soil and groundwater contamination sources, considering source characteristics, local environments and risk receptors. Source characteristics were evaluated by scoring relative risk of contamination sources. Local environments were evaluated by scoring annual rainfall, hydraulic conductivity of aquifer, and annual groundwater use. Risk receptors were evaluated by scoring local population, direct distance to surface water, direct distance to drinking-water wells. Scores of each parameter were allocated by analysing distribution of parameter values obtained from government databases. Distributed scores of source characteristics local environments: risk receptors were 12 : 12 : 12. The preliminary assessment scored 0 to 36 for each soil and groundwater sources. Inventory of soil and groundwater sources consisted of 7 categories. This study applied the preliminary assessment methodology to Manan-Gu, Anyang City, Korea. The number of car repair and washing facility was the largest in the contamination source inventory. Petroleum storage facilities showed the highest assessment score. The preliminary assessment methodology also indicated that Anyang-Dong was the priority section among Anyang-Dong, Suksu-Dong, Bakdal-Dong. This study is the first trial for relative ranking soil and groundwater contamination sources by considering source and local characteristics. Therefore, further researches and revision of the preliminary assessment methodology need to be pursued for various applications.

화학시약들을 이용한 지류에서 혈흔지문 증강에 관한 연구 (The study of bloody fingerprint enhancement on paper with chemical reagents)

  • 임승;김임순;노종윤;김상일;유제설
    • 분석과학
    • /
    • 제25권5호
    • /
    • pp.284-291
    • /
    • 2012
  • 혈흔지문은 매우 중요한 증거물이다. 본 실험은 지류에 유류된 혈흔지문에 대해 화학시약인 닌히드린, leucocrystal violet (LCV), fuchsin acid, 요오드, dimethylaminocinnam aldehyde (DMAC) 시약들의 증강효과를 확인한 것이다. 혈흔지문은 종이에 순차적으로 유류시킨 후 실온에서 건조해 사용하였다. 혈흔지문 융선이 비교적 선명할 경우에는 닌히드린과 LCV 시약이 가장 효과적이었지만, 눈에 보이지 않는 융선에 대한 증강효과는 크지 않았다. Fuchsin acid 시약을 사용하면 종이 표면이 염색되므로 혈흔지문의 contrast는 오히려 감소했다. 요오드 시약으로 혈흔지문 융선이 증강되긴 했지만, 반응 후 발색이 약하고 증강효과도 크지 않았다. DMAC 시약은 선명한 혈흔지문에 대한 증강효과가 좋지 않았지만, 희미한 융선에 대한 증강에는 매우 효과적이었다. 메탄올로 세척함으로서 DMAC로 증강된 혈흔지문의 contrast를 높일 수 있었다.

Petroleum Cokes의 화학적 처리에 의한 황성분 및 회분제거에 관한 연구 (A Study on the Desulfurization and Demineralization by Chemical Treatment of Petroleum Cokes)

  • 한웅;이시훈;박주식;양현수
    • 공업화학
    • /
    • 제7권6호
    • /
    • pp.1115-1124
    • /
    • 1996
  • MCL(Molten Caustic Leaching) 처리는 알카리에 의해 황성분 및 회분을 제거할 수 있도록 유용하게 개발된 화학적 정제공정이며, Si, Fe, V, Ni 등과 같은 무기물을 수용성염으로 전환을 시켜 제거한다. 그리고 MCL은 다른 탈황 공정보다도 탄소손실을 최소로할 수 있는 장점이 있다. 본 연구에서 황성분 및 회분제거에 대한 반응변수로는 침출온도, 침출시간, NaOH/cokes 비율, 산세정 농도와 세정 시간 그리고 입자크기 등이었다. 최적의 조건에서 MCL 처리를 한 결과 황성분과 회분은 각각 99%와 90%가 제거되었으며, 이때 FT-IR과 SEM의 결과에서 petroleum cokes 입자의 구조 및 표면변화는 침출온도 및 황성분과 회분의 제거율에 밀접한 관계를 나타내었다.

  • PDF

알킬이미다졸린과 지방산 카르바미드를 이용한 내구성 유연제의 제조에 관한 연구 (Studies on the Preparation of Durable Softners using Alkyl Imidazoline and Fatty Carbamide)

  • 정충호;박홍수;김영근
    • 공업화학
    • /
    • 제4권1호
    • /
    • pp.54-63
    • /
    • 1993
  • Dodecanoic acid와 tetraethylenepentamine을 반응시켜서 1, 2-disubstituted imidazoline을 얻었고, 이것을 양이온화시켜 유화형 1, 2-disubstituted imidazolinium salt를 합성하였다. 또한 docosanoic acid와 hydroxyethylethylenediamine을 반응시켜 중간생성물인 2-docosamido-2'-docosanoyloxydiethylamine을 얻었고, 다시 우레아와 반응시켜서 지방산 카르바미드를 얻었다. 이것을 역시 양이온화시켜 유화형 지방산카르바미드염을 합성하였다. 합성된 각종 염들을 블렌딩시켜 유연제를 제조한 후, 아크릴섬유에 유연처리를 하여 유연성, 평활성 및 대전방지성을 측정한 결과, 유연성과 평활성이 양호하였고 약간의 대전방지성도 보유하였다. 또한 강연도시험과 pH변화에 따른 촉감의 내세탁성 시험결과를 통하여 제조된 유연제가 내구성 유연제임을 입증하였으며, SEM으로 유연처리된 아크릴섬유의 표면구조를 관찰하였다.

  • PDF