• 제목/요약/키워드: surface washing

검색결과 392건 처리시간 0.022초

Protease (Subtilisin Carlsberg) 가 혈액 단백질 오구의 제거에 미치는 영향(II) -헤모글로빈 오구포의 세척성- (Effect of Pretense (Subtilisin Carlsberg) on the Removal of Blood Protein Soil (II) -The Detergency of Hemoglobin from Cotton Fabics-)

  • 이정숙;김성연
    • 한국의류학회지
    • /
    • 제20권4호
    • /
    • pp.655-666
    • /
    • 1996
  • The effect of protease (subtilisin Carlsberg) on the removal of hemoglobin as protein soil was studied. The relation between the renloval and the hydrolysis of hemoglobin by subtilisin Carlsberg was discussed. The soiled babric was prepared by spotting of hemoglobin solution evenly on the cotton fabric and was denatured by steaming. The soiled fabric was washed by using Terg-0-Tometer at various conditions. The removal efficiency was evaluated by analysis of protein on the fabrics before and after washing by means of copper-Folin method. 1. The removal of hemoglobin was increased in proportion to increasing of the enzyme concentration up to a certain point, but it began to decrease above the point. 2. The hemoglobin was removed effectively by adding of subtilisin Carlsberg, and more effectively removed by adding of AOS in the enzyme solution. 3. The removal of hemoglobin deviated from the first order reaction in detergency. 4. The renloval of hemoglobin was highest at $50^{\circ}C$ in detergency, Even at low temperature the removal efficiency of enzyme was relatively higher compared with the hydrolysis of hemoglobin by the enzyme. However the removal of hemoglobin was apparently decreased with the increase of temperature over $60^{\circ}C$. 5. The removal of hemoglobin was relatively high at pH 7.0~8.0 and increased continuously with the increase of pH in detergency 6. In detergency, the removal mechanism of hemoglobin by subtilisin Carlsberg could be explained as follows: Fisrt of all, the enzyme hydrolyzed hemoglobin substrates partially by forming E-S complex at the surface of hemoglobin on the cotton fiber, and decomposed cooperative binding of hemoglobin. Subsequently, the fragments of hemoglobin were easily removed by washing. According as the enzyme penetrated to inner part of hemoglobin gradually, the hemoglobin on the cotton fiber was effectively removed by the repetition of these process. The removal of hemoglobin was more effectively increased by adding both the enzyme and AOS in the washing solution. Therefore, it was regarded that AOS molecules were adsorbed at the hydrophobic surface of denatured hemoglobin, subsequently, decomposed more effectively cooperative binding of hemoglobin, and the fragments of hemoglobin were removed more efficiently by means of the interfacial reaction of AOS.

  • PDF

혼합계면활성제 용액의 표면장력 성분 (The Surface Tension Components of Mixed Surfactant Solutions)

  • 정혜원;윤혜신
    • 한국의류학회지
    • /
    • 제20권4호
    • /
    • pp.690-696
    • /
    • 1996
  • In order to study the affect of surfactants on the soil removal, the dispersion and polar force components of surface tension for surfactant solutions (such as LAS, AS, AOS, AES, AE) were calculated using extended Fowkes equation. The contact angles on paraffin and surface tension of surfactant solutions were measured. Cmcs of LAS, AS, AES and AE were below the concentration of 0.05%, but the cmc of AOS was between 0.05% and 0.1%. The surface tension of AE was lowest but the dispersion force component was greastest. Total surface tension of every mixed anionic surfactant was lower than that of single surfactants, and the dispersion force components were almost decreased. The addition of sodium carbonate to the sufactant solutions decreased the surface tension, and the surface tensions of surfactant solutions were lowered after washing.

  • PDF

면섬유와 케나프섬유를 혼방한 직물과 편성물에 대한 워싱 처리 효과 (Washing Treatment Effects on Cotton and Kenaf Blend Fabrics)

  • 이혜자;유혜자;임희정
    • 한국의류학회지
    • /
    • 제34권3호
    • /
    • pp.448-458
    • /
    • 2010
  • Kenaf has a rigid and rough touch that inhibits the use of it as a textile material; therefore, this study developed a novel textile material using kenaf. Kenaf and cotton were blended in the ratio of 3:7 and manufactured as 20' spun yarn that was compared to 20's spun yarn made of 100% cotton. Both kenaf/cotton-blended and 100% cotton spun yarn were constructed as plain woven and knitted fabrics. Four kinds of fabrics were prepared as follows. Plain kenaf/cotton-woven fabrics, plain cotton-woven fabrics, kenaf/cotton jersey, and cotton jersey. A cellulase washing process was carried out to reduce the character of kenaf/cotton-blended fabrics, rigid, and rough touch. All fabrics were pretreated with NaOH. NaOH at the concentrations of 0, 0.25, 1.25, and 2.25mol/L, and cellulase at concentrations of 0, 1, 3 and 5g/L were used since the pretreatment of NaOH has a higher efficiency of weight loss than $Na_2CO_3,\;K2CO_3$ and Triton X-100. The ratio of weight loss, tensile strength, stiffness, drape property, and surface appearance were measured in order to evaluate the efficiency of the washing treatment on fabrics. Kenaf/cotton-blended fabrics exhibited more rigid and rough features than cotton fabrics. A cotton jersey showed significant differences in the degree of stiffness and drape properties. When all fabrics were treated with 1.25mol/L of NaOH and 3g/L of cellulase, kenaf/cotton-blended fabrics showed a higher retention ratio of tensile strength than cotton fabrics after washing despite the increased weight l08s of kenaf-blended fabrics compared to cotton fabrics. The ratio of weight loss for all fabrics was well correlated with flexibility. The washing treatment process made woven fabrics more flexible than knitted fabrics, because the stiffness of woven fabrics made the rubbing actions stronger. Kenaf/cotton-blended fabrics showed a significantly higher ratio of weight loss and more reduction in stiffness than cotton fabrics after the washing treatment. This might be due to the lack of cohesiveness and easy elimination from fabrics. The drape property of kenaf-blended fabrics was superior to cotton fabrics.

Protease가 섬유의 손상에 미치는 영향 (An Influence of Protease on Damage of Fiber)

  • 송경헌;양진숙;최종명
    • 한국의류학회지
    • /
    • 제22권2호
    • /
    • pp.224-232
    • /
    • 1998
  • Protease is mixtured in detergent to remove protein-soil easily. It must not act on the any fiber except protein-soil during laundry. So the purpose of this study is to investigate how protease is affect the fiber, particulary the protein-fiber. For this purpose, silk, wool and nylon are selected as samples, and the extent of the damage was estimated as tensile strength and surface condition (that is fibrillation). The results are as follows. The tensile strength of fiber treated with protease were lowered at enzyme concentration 0.1%, temperature 4$0^{\circ}C$ , and, as washing time was longer, it was lowered more. And it was showed that the surface of fibers were fiblliated by protease during washing. From this results, it was found that protease damaged protein-fiber. The damage of silk was the largest of all, and wool was less damaged than silk, because it has the scale (cuticle) on the outside. Additionary, an influence of surfactant on damage of fiber was little about three fibers, but, the fibers were damaged more by the binary nonionic-surfactant and protease mixture than by protease only.

  • PDF

침염시킨 철기 유물 표면 위에 형성된 부식 생성물과 탈염처리에 대한 연구 (A Study on Desalization and Corrosion Products Formed on Salinized Archaeological Iron Artifacts)

  • 민심근;이재형;이재봉;안병찬
    • 한국표면공학회지
    • /
    • 제40권1호
    • /
    • pp.44-56
    • /
    • 2007
  • Excavated archaeological iron artifacts are usually conducted the conservation treatment for removal of chloride ions in the corrosion products. However, some iron artifacts are corroded again even after the conservation treatment due to unremoved chloride ions. Therefore, it is important to prevent desalinized artifacts from the occurrence of corrosion after the treatment. In this paper, we investigated the characteristics of corrosion products on salinized iron artifacts and evaluated the variety of desalination methods such as autoclave, intensive washing and NaOH. It was also found that ${\beta}-FeOOH$ (Akaganeite) played an important role on the occurrence of corrosion and the treatment for removal of chloride ions. The extents of desalination were compared between the desalination methods. Results showed that the autoclave method represented the highest efficiency for desalination while the intensive washing method was the lowest.

알루미늄 중력주조용 내구성 도형제의 도형조건에 따른 내마모 및 내열특성 연구 (A Study on the Wear and Heat Resistance Properties of Durable Moldwash Conditions for Al Gravity Die Casting According to Mold Washing Process Condition)

  • 김억수;남궁정;박진하;이광학
    • 한국주조공학회지
    • /
    • 제28권5호
    • /
    • pp.237-241
    • /
    • 2008
  • This study has been carried out to investigate the wear and heat resistant properties of durable moldwash agent for Al gravity casting according to mold washing process conditions. The wear properties of coated specimen were performed by sliding wear testing machine and heat resistance were evaluated by measuring the loss of coated moldwash agent during emerging of coated specimen in Al melts. During testing, experimental variables were mold surface temperature, moldwash agent/distilled wear, and additive concentrations. The lower additive concentration and mold temperature caused the smooth surface roughness of coated specimen, It was found that the specimen coated with moldwash/water ratio 1:3, additive concentration 9wt% and mold temperature higher than $200^{\circ}C$ showed superior wear and heat treatment. Also, these results were supported by fluidity test.

통계적 기법을 이용한 스핀드럼의 시밍 최적조건 선정 (Selection of the Optimum Seaming Condition for Spin Drum Using Statistical Method)

  • 김의수;이정민;김병민
    • 한국정밀공학회지
    • /
    • 제25권1호
    • /
    • pp.99-107
    • /
    • 2008
  • There are being a lot of studies for achievement of high speed Dehydration, high-strength and Lightweight of washing machine in the latest washing machine business. It is essential that strength of mechanical press-Joining (MPJ) for spin drum is improved to attain that target. MPJ of spin drum is composed of seaming and caulking process. Because Seaming process of MPJ has various design factors such as thickness, bending radius, seaming width, caulking press width and the dynamic factor such as multistage plastic working, elastic recovery, residual stress, the optimum conditions can't be easily determined. Using a design of experiment (DOE) based on the FEM (Finite Element Method), which has several advantages such as less computing, high accuracy performance and usefulness, this study was performed investigating the interaction effect between the various design factor as well as the main effect of the each design factor during drum MPJ and proposed optimum condition using center composition method among response surface derived from regression equation of simulation-based DOE.

DNA 검출 공정 전용 플라스틱 튜브형 시험관 개발에 관한 연구 (A study on development of plastic vial tube for the DNA detection process)

  • 최규완;라문우;강정희;장성호
    • Design & Manufacturing
    • /
    • 제11권3호
    • /
    • pp.35-40
    • /
    • 2017
  • PCR(Polymerase chain reaction) is a technique to replicate and amplify a desired part of DNA. It is used in various aspects such as DNA fingerprint analysis and rare DNA amplification of an extinct animal. Especially in the medical diagnosis field, it provides various measurement methods at the molecular level such as genetic diagnosis, and is a basic tool for molecular diagnostics. The internal shape of the plastic vial tube for PCR analysis used in the DNA detection process, and the surface roughness and internal cleanliness can affect detection and discrimination results. The plastic vial tube demanded by the developer of the PCR analysis equipment should be changed to a structure that eliminates the residual washing solution in the washing process to ensure the internal cleanliness. Thus the internal structure and the internal surface design for improving the PCR amplification efficiency are key issues to develop the plastic vial tube for the DNA detection process.

정특성 및 동특성 해석을 통한 고속세탁기 주축의 형상 최적화 (The Shape Optimization of washing Machine Shaft for High-Speed Rotation through Analysis of Static and Dynamic Characteristics)

  • 김의수;이정민;김병민
    • 한국정밀공학회지
    • /
    • 제25권5호
    • /
    • pp.132-139
    • /
    • 2008
  • To meet demand of big capacity and high speed rotation for washing machine, more stress from bending and twisting are complexly loaded onto the shaft supporting the horizontal drum, causing problems in fracture strength and fatigue life. Also, Vibration occurs due to the frequency of the rotating parts. But, shaft has various design factors such as diameter and distance between bearings according to configuration of shaft, the optimal values can't be easily determined. Using a design of experiment (DOE) based on the FEM (Finite Element Method), which has several advantages such as less computing, high accuracy performance and usefulness, this study was performed investigating the interaction effect between the various design factor as well as the main effect of the each design factor under bending, twist and vibration and proposed optimum design using center composition method among response surface derived from regression equation of simulation-based DOE.

세척방법에 따른 신선편이 슬라이스 더덕의 저장 중 품질 특성 변화 (Effect of washing methods on the quality of freshly cut sliced Deodeok (Codonopsis lanceolata) during storage)

  • 최덕주;이윤정;김윤경;김문호;최소례;차환수;윤예리
    • 한국식품저장유통학회지
    • /
    • 제20권6호
    • /
    • pp.751-759
    • /
    • 2013
  • 세척방법 차이에 따른 신선편이 슬라이스 더덕의 저장 중 품질 변화를 알아보기 위하여 $10^{\circ}C$에서 저장 실험을 진행하였다. 저장 10일 후에 무세척구와 손세척은 전체의 80.3% 더덕이 부패되어 상품성을 상실하였을 뿐만 아니라 조직감의 연화도 급격히 진행되어 측정이 불가능하였다. 그러나 버블세척구들은 20.4~30.1%의 중량 손실만을 보였으며, 특히 마이크로버블세척구는 저장초기에 비하여 11.1%정도의 조직감만 감소하여 저장 중 변화가 가장 적었다. 슬라이스 더덕의 표면색도 갈변화를 최소화시키며 저장 중 색을 유지하는데 효과적인 것으로 나타났다. 저장 중 수분함량의 변화는 모든 처리구에서 감소하였는데, 특히 무세척구와 손세척은 각각 74.6, 78.3%로 수분함량이 크게 감소하였다. 저장 중 미생물의 수도 마이크로버블세척, 일반버블세척, 손세척, 무세척구 순으로 증식하는 것으로 나타났다. 관능검사와 video microscope system을 이용하여서도 마이크로버블 세척구는 이물질이 발견되지 않았음을 알 수 있었으며, 다른 처리구들보다 세척효과도 우수한 것으로 확인되었다. 이는 마이크로버블세척을 하여 슬라이스 더덕을 저장하는 것이 품질유지에 가장 적합하였으며, 저장수명도 10일($10^{\circ}C$ 저장시)로 가장 길게 나타났다.