• 열처리공학회지
• /
• 제11권4호
• /
• pp.315-323
• /
• 1998

This study has been conducted to develope the combined heat treating technique of gas carburising - gas nitriding and gas carburising to improve the hot working performance of type H3 hot work tool steel. Case depth and carbrides coarsening were increased with increasing carburising temperature and time, respectively. Surface hardness showed decreasing tendency with increasing 2nd tempering temperature after carburising treatment. After carburising, 2nd treatment at 500 to 600 was chosen according to a hardness demand of final product. High temperature tempering resistance showed more excellent quality during such carburising-nitriding or carburising than complex treatment as after conventional hardening.

• Journal of Veterinary Science
• /
• 제24권3호
• /
• pp.31.1-31.6
• /
• 2023

Allograft arthroplasty is a promising cartilage-resurfacing technique. A 14-year-old horse was diagnosed with a medial femoral condyle subchondral bone cyst. Allografts were harvested from a young donor animal and implanted to fill the cyst cavity. A visual assessment of the surgical site was possible during follow-up arthroscopy. In addition to a desirable gliding surface and a good adaptation of the grafts, fibrillation of the cranial ligament of the medial meniscus was noted and debrided. The recipient horse became sound four months after follow-up surgery with a high level of owner satisfaction. In conclusion allograft transplantation is a promising technique for treating subchondral bone cysts.

• 한국잠사곤충학회지
• /
• 제39권1호
• /
• pp.56-61
• /
• 1997

The silk fibroin solution was prepared and applied to the surface of fabrics for the purpose of weighting as well as a surface modification. The water-soluble fibroin solution can be obtained by dissolving the cocoon fibroin in a boiling solution of 50% calcium chloride for 60 minutes. For the fixation of a water soluble fibroin onto the fabric surface, the various methods were investigated. The fixation can be achieved on a silk fabric by the after treatment with ethanol, stannous choride and methacrylamide. On the other hand, the epichlorhydrin compound is the most promising fixation agent for a cotton fabric. As a result of the examination of property changes, the softness and crease recovery were lessened for a silk crepe fabric by treating with 1-2% fibroin solution, while those properties were improved for a silk knit fabric.

• Carbon letters
• /
• 제2권2호
• /
• pp.91-98
• /
• 2001

Porous carbons have been prepared from different parts of banana stems using two different routes, viz., by pyrolysing the mass at different temperatures as well as by treating the dried mass with chemicals followed by pyrolysis. The pyrolysis behaviour of all these materials has been studied up to $1000^{\circ}C$. Samples treated with acids exhibit more increase in surface area as compared to those treated with alkalies or salts. Analysis of BET surface area shows that the carbon prepared at low temperature shows mixed porosity, i.e., micro and mesopores. Samples heated to high temperature above $700^{\circ}C$ show decrease in macroporosity and increase in microporosity. Liquid adsorption studies have been made using methylene blue and heavy oil. The activated carbons so prepared exhibit higher oil adsorption mainly in the macro and mesopores.

• Journal of Mechanical Science and Technology
• /
• 제19권10호
• /
• pp.1910-1918
• /
• 2005

Characterizing electrochemical polymerization of polypyrrole film on a substrate depends on many parameters. Among them, potential difference and cumulative charges play important role. The level of potential difference affects the quality of the polypyrrole. On the contrary, cumulative charge affects the thickness of the polypyrrole. The substrate surface is adjusted physically and chemically by treating with sandblasting and the addition of thiol for surface adhesion improvement. Experimental results show that the sandblasted and thiol treated substrate provides better. adhesion than non-sandblasted and non-thiol treated substrate.

• Tribology and Lubricants
• /
• 제24권6호
• /
• pp.386-392
• /
• 2008

Friction and wear behavior of hard coated and surface treated steel with candidate processing methods for low velocity high pressure application investigated. Wear tests were carried out under specific region considering the operation condition of construction equipments under lubricated and unlubricated condition. Different tribological behavior analyzed with comparing the wear rate of counter part, morphology and topography of worn surface and the worn volume of samples and counter parts.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1292-1294
• /
• 1994

With the contact angle of phase epoxy resin on the inorganic filler(glass plate) surface treated with air plasma, we have studied about the interface between epoxy resin and glass plate as simple model of a glass fiber reinforced composite materials. The contact angle on the inorganic filler surface varied with surface treatment conditions. The contact angle significantly depends on plasma treating time and environment temperature of the oven.

• 한국표면공학회지
• /
• 제26권6호
• /
• pp.285-290
• /
• 1993

A series of samples were prepared by treating natural zeolite from Kampo area with HCl and NaOH. And, the adsorption characteristics of some liquid samples were investigated by the Diamond-Kinter method. The adsorption amount of all liquid investigated was more effective in acid treatment than in alkali treatment. In the case of n-, iso-C3H7OH, thed adsorption amount of n-form which has smaller molecular size was larger. Similar tenedncy was observed in n-, iso-C4H9OH, but the amount was lower than n-, iso-C3H7OH. In CHCl3 and CCl4, that of CHCl, which is smaller molecular size and has polarity, was far lager. From the view of the molecular size, adsorption amount of C6H5CH3 and p-C6H4(CH3)2 showed the characteristics of surface activity rather than chemical treatment.

• Environmental Engineering Research
• /
• 제24권3호
• /
• pp.412-417
• /
• 2019

This paper presents the results of using cold plasma to treat surface water for domestic use purpose. Experimental results showed that cold plasma was an effective method for destroying bacteria in water. After treatment with cold plasma, concentration of coliform and Escherichia coli dramatically reduced. Besides, cold plasma significantly removed water odor, increased dissolved oxygen and decreased the concentration of chemical oxygen demand. However, cold plasma significantly raised the concentration of nitrite and nitrate. Other disadvantages of treating with cold plasma were conductivity increase and pH reduction. Pretreatment steps of coagulation, flocculation, sedimentation and sand filtration followed by disinfection with cold plasma exhibited a high efficiency in surface water treatment. All parameters of surface water after treatment by using the prototype satisfied with the allowance standard of domestic water quality.

• 한국조리학회지
• /
• 제7권2호
• /
• pp.181-194
• /
• 2001

Autoclaving법으로 제조한 솔잎향미유(pine needle seasoning oil, PNSO) 0~3%(w/w)와 유화제를 2:1(w/w)로 혼합하여 식염수에 용해시킨 후 이를 밀가루와 반죽하여 건면을 제조하였다. PNSO 처리량이 증가할수록 수분흡수율, 부피팽창율, 고형분 용출율은 감소하였으며, 조리시간은 연장 되는 것으로 나타나 적정 처리량은 2~3%(w/w) 수준인 것으로 판명되었다. 한편, 관능검사 결과 PNSO의 처리에 따라 조리면에서 솔잎 고유의 녹색이 나타났으며, 조리면의 표면이 매끈하였고, 쫄깃쫄깃한 rheology 및 texture가 크게 개선되었다. PNSO 2%(w/w) 이상 처리군에서는 조리 후 20~30분이 경과하여도 조리면의 쫄깃쫄깃한 특성이 그대로 유지되어 식당, 단체급식소 등의 대량 취식용으로도 적합할 것으로 판단되었다.