• Journal of Wetlands Research
• /
• v.9 no.1
• /
• pp.69-78
• /
• 2007

Constructed wetlands and other aquatic systems have been successfully used for waste and wastewater treatment in either temperate or tropical regions. To treat waste or wastewater in a sustainable manner, the integrated eco-engineering designs are explained in this paper with 2 case studies: (i) a combination of vertical-flow constructed wetland (CW) with plant irrigation systemfor fecal sludge management and (ii) integrated CW units with landscaping at full-scale application for domestic wastewater treatment. The pilot-scale study of fecal sludge management employed 3 vertical-flow CW units, each with a dimension of $5{\times}5{\times}0.65m$ (width ${\times}$ length ${\times}$ media depth) and planted with cattails (Typha augustifolia). At the solid loading rate of 250 kg total solids (TS)/$m^2.yr$ and a 6-day percolate impoundment, the CW system could achieve chemical oxygen demand (COD), TS and total Kjeldahl nitrogen (TKN) removal efficiencies in the range of 80 - 96%. The accumulated sludge layers of about 80 - 90 cm was found at the CW bed surface after operating the CW units for 7 years, but no clogging problem has been observed. The CW percolate was applied to 16 irrigation Sunflower plant (Helianthus annuus) plots, each with a dimension of $4.5{\times}4.5m$ ($width{\times}length$). In the study, the CW percolate were fed to the treatment plots at the application rate of 7.5 mm/day but the percolate was mixed with tap water at different ratio of 20%, 80% and 100%. Based on a 1-year data of 3-crop plantation were experimented, the contents of Zn, Mn and Cu in soil of the experimental plots were found to increase with increasing in CW percolate ratios. The highest plant biomass yield and oil content of 1,000 kg/ha and 35%, respectively, were obtained from the plots fed with 20% or 50% of the CW percolate, whereas no accumulation of heavy metals in the plant tissues (i.e. leaves, stems and flowers) of the sunflower is found. In addition to the pilot-scale and field experiments, a case study of the integrated CW systems for wastewater treatment at Phi Phi Island (a Tsunami-hit area), Krabi province, Thailand is illustrated. The $5,200-m^2$ CW systems on Phi Phi Island are not only for treatment of $400m^3/day$ wastewater from hotels, households or other domestic activities, but also incorporating public consultation in the design processes, resulting in introducing the aesthetic landscaping as well as reusing of the treated effluent for irrigating green areas on the Island.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.307-313
• /
• 2014

In order to predict the post-cracking tensile behavior of fiber reinforced concrete, it is necessary to evaluate the fiber orientation factor which indicates the number of fibers bridging a crack. For investigation of fiber orientation factor on a circular cross-section, in this paper, cylindrical steel fiber reinforced concrete specimens were casted with the variables of concrete compressive strength, circular cross-section size, fiber type, and fiber volumetric ratio. The specimens were cut perpendicularly to the casting direction so that the fiber orientation factor could be evaluated through counting the number of fibers on the circular cross-section. From the test results, it was investigated that the fiber orientation factor on a circular cross-section was lower than 0.5 generally adopted, as fibers tended to be perpendicular to the casting direction. In addition, it was observed that the fiber orientation factor decreased with an increase of the number of fibers per unit cross-section area. For rational prediction of the fiber orientation factor on a circular section, a rigorous model and a simplified equation were derived through taking account of a possible fiber inclination angle considering the circular boundary surface. From the comparison of the measured data and the predicted values, it was found that the fiber orientation factor was well predicted by the proposed model. The test results and the proposed model can be useful for researches on structural behavior of steel fiber reinforced columns with a circular cross-section.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.9
• /
• pp.5-12
• /
• 2018

The foundation of the multi-span greenhouse structures is designed with small shallow concrete foundation considering mainly the vertical load. However, recently, due to an abnormal climate such as strong wind, horizontal load and up-lift load over design strength are applied to the foundation, causing safety problems of the greenhouse foundation. In order to reasonably evaluate the safety of greenhouse foundations, rotational and pullout stiffness expressed by the ground-foundation interaction should be evaluated, which also affects the safety of the upper structural members. In this study, three representative basic foundation types were selected by classifying greenhouse standards in Korea according to the shape, and the horizontal loading tests and theoretical calculation were performed for each foundation type. As a result of the comparison and analysis of the test and calculation, it was found that rotational resistance of the foundation is different according to the ratio of the contact area between the foundation and ground when the conditions of the foundation - ground contact surface and the mechanical properties of the ground are the same.

• Korean Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.190-199
• /
• 2012

The reproductive ecology of an endangered species, Gobiobotia macrocephala (Pisces: Cyprinidae), was investigated in the Seom River, a tributary of the Han River drainage system, from March 2010 to February 2011. During the non-spawning season, no difference in the external morphology was observed between males and females; however, during the spawning season, clear differences merged for the depth and width of the body, preventral length and preanal length in the standard length. The sex ratio of females to males was 1 : 1.01. The spawning season was estimated to last from late April to middle of June, at water temperatures of $15{\sim}25^{\circ}C$. The number of mature eggs in the ovary averaged about $2,134{\pm}930$ (mean${\pm}$SD), and the mean diameter was approximately $0.88{\pm}0.04$ mm. The spawning area was composed of pebble and cobble bottoms (3~10 cm), with current velocities of 13~24 cm $s^{-1}$ and water depths of 12~18 cm. Spawning behavior between males and females was observed in a water tank 14~15 h after injecting females with Ovaprim to promote reproduction. Fish spawned near the water surface with monogamous pairing.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.507-528
• /
• 2011

Agricultural workers who mix/loads and spray pesticide in fields expose to pesticide through dermal and inhalation routes. In such situation, exposed amount should be measured quantitatively for reasonable risk assessment. Patch, gloves, socks and mask will be good materials for monitoring for dermal exposure while personal air monitor equipped with solid adsorbent and air pump will be a tool for inhalation exposure. For extrapolation of absorbed amount in dermal exposure matrices and of trapped amount in solid sorbent to total deraml or inhalation exposure, Korean standard body surface area and respiration rate were proposed in substitution of EPA data. Important exposure factors such as clothing and skin penetration ratio of dermal and inhalation exposure were suggested based on Spraying time for exposure monitoring must be long enough that the amount of pesticide to get absorbed/trapped in exposure matrices results in reasonable analytical value. In domestic case for the both of speed sprayer and power spray machine, spraying time of 20~40 minutes (0.1~0.2 ha) will be reasonable per single replicate before extrapolating to 4 hours a day with triplicates experiment.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.425-431
• /
• 2005

New type of supercapacitor using high surface area activated carbons mixed with high conductivity polypyrrole (Ppy) has been prepared in order to achieve low impedance and high energy density. Mixed carbons of BP-20 and MSP-20 were used as the active electrode material, and polypyrrole doped with 2-naphthalenesulfonic acid (2-NSA) and carbon black (Super P) as conducting agents were added to activated carbons in order to enhance good electric conductivity. Electrodes prepared with the activated electrode materials and the conducting agents were added to a solution of organic binder [P(VdF-co-HFP) / NMP]. The ratio of optimum electrode composition was 78 : 17 : 5 wt.％ of (MSP20 : BP-20=1 : 1), (Super P : Ppy=10 : 7) and P(VdF-co-HFP) respectively. The performance of unit cell with addition of 7 wt％ Ppy have shown specific capacitance of 28.02 F/g, DC-ESR of $1.34{\Omega}$, AC-ESR of $0.36{\Omega}$, specific energy of 19.87 Wh/kg and specific power of 9.77 kW/kg. With addition of Ppy, quick charge-discharge of unit cell was possible because of low ESR, low charge transfer resistance and quick reaction rate. And good stability up to 500 chargedischarge cycles were retained about 80％ of their original capacity. It was concluded that the specific capacitance originated highly from compound phenomena of the pseudocapacitance by oxidation-reduction of polypyrrole and the nonfaradaic capacitance by adsorption-desorption of activated carbons.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.7-12
• /
• 2020

Astragalus uliginosus L.-stems as a by-product of oriental medicine are produced largely in a northern area of Chungbuk province. These by-products do not have any demand and thus usually discarded into the fields as a waste. In this work, a biochar was prepared from the Astragalus uliginosus L.-stem waste for recycling. The biochar was used to investigate the removal characteristics of cadmium and manganese ions dissolved in water. When adsorption equilibrium experiments were performed to treat 50 and 100 mg/L of cadmium ions, the removal efficiencies of cadmium were 100 and 95%, respectively. In addition, the maximum of adsorption amount for manganese ions in 5 h at an initial concentration of 50 and 100 mg/L was found to be as 36.1 and 37.9 mg/g, respectively. Based on the experimental results, it was found that the adsorption amount of Astragalus uliginosus L.-stem biochar for the removal of both cadmium and manganese ions was four times higher than that of the activated carbon. The surface analysis of both biochar and activated carbon samples using X-ray photoelectron spectroscopy (XPS) analysis showed that the oxygen content and O/C ratio of biochar was 2.1 and 2.4 times higher than that of the activated carbon, respectively. In order to enhance the removal capability of manganese, 50 and 100 mg/L of manganese ions were operated at different temperatures. It was observed that these equilibrium was attained in 4 h under 45 ℃ and removal efficiencies were 92 and 53%, respectively. Consequently, the experimental results can be utilized as a new removal technology for eco-friendly and economically treating cadmium and manganese ions dissolved in water.

• Journal of Hydrogen and New Energy
• /
• v.25 no.6
• /
• pp.577-585
• /
• 2014

Nanorod and particle shape $CeO_2$ were synthesized via hydrothermal process and precipitation method, respectively, and used as supports of Pt catalyst for water gas shift (WGS) reaction. Three different durations (12, 48, and 96h) for hydrothermal process were applied for the preparation of nanorod type $CeO_2$. 1.0 wt% of Pt was loaded on the prepared supports with incipient wetness method prior to the catalytic activity tests that were carried out at a GHSV of $95,541h^{-1}$, and a temperature range of 200 to $360^{\circ}C$. Varying duration of hydrothermal process led to the difference in physical characteristics of $CeO_2$ nanorods, such as aspect ratio, BET surface area, pore diameter, and pore volume. Consequently, the catalytic activities of Pt/$CeO_2$ nanorods were affected by the physical characteristics of the supports and appeared to be in the order of Pt/$CeO_2$(12) > Pt/$CeO_2$(48) > Pt/$CeO_2$(96). The comparison of the catalytic activities and results of the analysis (XPS, XRD, SEM, BET and TPR) for the supports revealed that the activity of the catalysts depends on chemical states of the Pt and the support materials in the temperature range that is lower than $280^{\circ}C$. However, the activity is rather dependent on the physical characteristic of the supports because the increased gas velocity limits the mass transfer of reactants in micropores of the supports.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.4
• /
• pp.640-651
• /
• 1997

This study was performed to examine the distribution patterns, ecological characteristics and celluar fatty acid compositions of marine bacteria in Suyeong Bay. During study periods, total cell count (TC) and viable cell count (VC) were $10^7-10^8/m\ell\;and\;10^4-10^6\;cfu/m\ell$, respectively. The temporal variations of TC showed similar patterns between surface and bottom layer, but the VC at bottom decreased gradually from winter to summer. Among the 303 bacterial strains isolated in the study area, which belong to 10 genus types, Pseudomonas spp., $(32.3\%)$, Acinetobader sup. $(19.1\%)$, Vibrio spp. $(11.2\%)$, Flovobacterium spp. $(10.6\%)$ and Bacillus spp. $(7.9\%)$ were dominant. Thirty-one fatty acids were detected from Pseudomonas spp. and Bacillus spp., which were the most predominated among Gram positive and Gram negative bacteria. Celluar fatty acid compositions of Bacillus spp. were relatively simple compared to those of Pseudomonas spp.. Relatively high ratio of monounsaturated forms were detected in Pseudomonas spp. while branched types were dominant in those of Bacillus spp.. Hydroxy and cyclopropane fatty acid were detected only in the cellular fatty acid of Pseudomonas spp.. Cellular fatty acid compositions of Pseudomonas spp. revealed relatively high percentage of $C_{16:1},\;C_{17:1},\;C_{18:1}\;and\;C_{16:0}$, While Bacillus spp. predominated $C_{16:0}\;iso\;C_{16:0}\;anteiso,\;C_{17:0}\;anteiso\;and\;C_{16:1}$.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.1
• /
• pp.31-39
• /
• 2017

The fundamental study for an application of nanobubble as a soil remediation enhancer on heavy metal contaminated soil was carried out. The existence and long-term stability of hydrogen nanobubbles were investigated by particle analysis and zeta-potential analysis. And the removal efficiency of copper using nanobubble water(NBW) and distilled water(DW) were compared and analyzed through a batch desorption test. As a result, it is confirmed that nanobubble which was fabricated by compression-dissolution type generator can exist for more than 14 days. The results of batch test show that copper removal of NBW was higher than that of DW irrespectively to soil type and increased as solid-liquid ratio and contact time increased, respectively. According to the pH change, the removal of copper on sand was higher on the acid side but the removal difference was slightly lower on the clay. It is considered that a high efficiency of NBW in copper removal is due to the large surface area and high zeta-potential of nanobubbles. Therefore, the nanobubble can be applied to soil remediation for heavy-metal contaminated soil as an eco-friendly enhancer.