• Journal of Welding and Joining
• /
• 제4권1호
• /
• pp.32-39
• /
• 1986

This paper was studied about the influence of oxidized films on workability in cold pressure welding. In preceding studies, the principal foci of the studies about pressure welding were considered several factors(surface manufacturing methods, surface roughness, pressure welding speed and surface temperature). But the influence to the growth of oxidation have hardly known well. So the purpose of this paper consists in solving the question above and proposing the optimal states of the pressure welding. Therefore the results obtained is as the following; When the oxidation time is within about 2 minutes, the bonding strength is very good after surface manufacturing of the neighboring to be bonded. The more surfaces are fine the more bonding strength is excellent. Above all, the optimal condition of cold pressure welding is the state that the characteristic value is 38% with smooth surface and without oxidation.

• International Journal of Automotive Technology
• /
• 제5권2호
• /
• pp.123-133
• /
• 2004

This paper describes a robust and fast wheel slip tracking control using a moving sliding surface technique. A traction control system (TCS) is the active safety system used to prevent the wheel slipping and thus improve acceleration performance, stability and steerability on slippery roads through the engine torque and/or brake torque control. This paper presents a wheel slip control for TCS through the engine torque control. The proposed controller can track a reference input wheel slip in a predetermined time. The design strategy investigated is based on a moving sliding surface that only contains the error between the reference input wheel slip and the actual wheel slip. The used moving sliding mode was originally designed to ensure that the states remain on a sliding surface, thereby achieving robustness and eliminating chattering. The improved robustness in driving is important due to changes, such as from dry road to wet road or vice versa which always happen in working conditions. Simulations are performed to demonstrate the effectiveness of the proposed moving sliding mode controller.

• 한국진공학회지
• /
• 제8권4A호
• /
• pp.403-409
• /
• 1999

The surface state of Ar plasma-exposed Fe doped SI-InP have been investigated by photoreflectance (PR). From Ar plasma-exposed InP with 30 W for 10sec, the PR signals include a peak $(E_{Ar})$ that is located at 1.336 eV. We think that this peak was originated shallow level related to $V_In-V_P$. And we compared this level with the level obtained by surface photovoltage spectroscopy (SPV) measurement. The result of the PR agrees well with that from SPV. Additionally, Ar plasma induced phosphorus vacancy is related to shallow level. Therefore, the change of surface electric field are attributed to the shallow level. This level is caused by the existence of phsophorus vacancy on InP surface.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1995년도 제8회 학술발표회 논문개요집
• /
• pp.113-113
• /
• 1995

The adsorpption and decompposition of NO on a stepped ppt(111) surface have been studied using thermal desorpption sppectroscoppy and Auger electron sppectroscoppy. NO adsorbs molecularly in two different states of the terrace and the stepp, which are distinguishable in thermal desorpption sppectra. NO dissociates via a bent sppecies at the stepp sites on the basis of vibrational sppectrum data repported ppreviously. The dissociation of NO is activation pprocess : the activation energy is estimated to be about 2 kcal/mol. Increase in the NO dissociation with adsorpption tempperature is expplained by a pprocess controlled by different of the dissociated atomic nitrogen from the stepp to the terrace of the surface. In addition to No and N2, the desorpption ppeak of N2O is observed. We conclude that the formation of N2O is attributed to surface reaction of No and N adsorbed on the surface.

• Tribology and Lubricants
• /
• 제20권1호
• /
• pp.7-13
• /
• 2004

High strength steels are widely used as tribo-materials in the field. Previous study revealed that for mild steel, the states of strain on the worn surface measured by X-ray diffraction has a good relationship with the state of wear. The objective of this study is to identify the relationship between the state of strain on the worn surface and the state of wear in high strength steels. Sliding wear tests were carried out using several hardened steels. X-ray diffraction tests were conducted to analyze the state of strain on the worn surface during wear. The experimental results indicated that the state of strain on worn surface in the hardened steel shows the same tendency as in the mild steel. It is clear that change of half value width on the worn surface as a function of sliding speeds is broadly similar in shape to wear characteristics curve and its magnitude has a good relationship with the wear rate at two different wear modes in the hardened steel.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.314-314
• /
• 2011

Using first principles calculations, we investigated the interface structure effects on the magnetic properties of the Fe/BaTiO3 system. On the BaO-terminated surface, a Fe monolayer is formed as two Fe atoms are adsorbed on the top sites of Ba and O in the ($1{\times}1$) surface unit and a Fe ML is formed on the TiO2-terminated surface as two Fe atoms are adsorbed on the two O top sites. The magnetic anisotropy energy of Fe was higher on the TiO2?-erminated surface (1.5 eV) than on the BaO-terminated surface (0.5 eV). The decomposed electron density of the states showed that the stronger hybridization of Fe with the TiO2 layer than with the BaO layer is the most important reason for the higher magnetic anisotropy energy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.299-302
• /
• 2000

In this study, we have made the large holographic surface relief gratings on amorphous chalcogenide $As_{40}$$Ge_{10}$$Se_{15}$$S_{35}$ films by two beam interference using a He-Ne laser(632.8nm) light. The film thickness was about 0.6$\mu\textrm{m}$, we could magnify beam size by using beam expander. We made use $90^{\circ}$ holder which was made of reflection mirror and sample. Formed the surface relief structures were investigated using optical microscope. The diffraction efficiency was obtained by measuring +lst order intensity. In addition we investigated grating formation and diffraction efficiency as a function of polarization states which is linear or circular polarization. The results indicate that the grating was formed by linear polarized beam is better clear than that by circular polarized beam.

• Journal of Magnetics
• /
• 제20권1호
• /
• pp.1-7
• /
• 2015

We investigated the half-metallicity and magnetism at the (001) and (110) surfaces of YC in zinc-blende structure by using the all-electron full-potential linearized augmented plane wave method within the generalized gradient approximation. From the calculated local density of states, we found that neither (001) nor (110) surface preserves the half-metallicity. While the magnetic moment of Y atom in the YC bulk is $0.116{\mu}_B$, it is $0.057{\mu}_B$ at the topmost layer of Y-terminated (001) surface. On the contrary, C-terminated (001) YC surface exhibits stronger magnetism than the bulk structure; the calculated magnetic moment on topmost C atom is $1.084{\mu}_B$, while that of C atom in the bulk structure is $0.423{\mu}_B$. The magnetic properties of the non-polar (110) YC surface are slightly enhanced as compared with the bulk structure.

• Bulletin of the Korean Chemical Society
• /
• 제16권2호
• /
• pp.157-163
• /
• 1995

The adsorption and decomposition of NO on a stepped Pt(111) surface have been studied using thermal desorption spectroscopy and Auger electron spectroscopy. NO adsorbs molecularly in two different states of the terrace and the step, which are distinguishable in thermal desorption spectra. NO dissociates via a bent species at the step sites on the basis of vibrational spectrum data reported previously. The dissociation of NO is an activation process : the activation energy is estimated to be about 2 kcal/mol. Increase in the NO dissociation with adsorption temperature is explained by a process controlled by diffusion of the dissociated atomic nitrogen from the step to the terrace of the surface. In addition to NO and N2, the desorption peak of N2O is observed. We conclude that the formation of N2O is attributed to surface reaction of NO and N adsorbed on the surface.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4930-4941
• /
• 2014

본 연구에서는 첫째, 서비스 업종에 종사하는 종업원들의 감정노동에 영향을 미치는 선행요인으로서 직무관련 정서상태의 효과를 검증하였으며, 둘째, 감정노동의 결과요인으로서 선행연구에서 주로 다루었던 부정적 직무태도 뿐만 아니라 긍정적 직무태도에 대한 감정노동의 효과를 고찰하였다. 마지막으로 종업원들이 과업환경에서 경험하는 직무관련 정서와 직무태도 간의 관계를 매개하는 감정노동의 효과를 검증하였다. 국내 15개 서비스 기업에 종사하는 150명의 종업원을 대상으로 실시한 설문분석 결과, 직무관련 긍정 정서상태는 종업원으로 하여금 내면행동을, 직무관련 부정 정서상태는 표면행동을 유발함이 검증되었다. 또한 내면행동은 긍정적인 직무태도인 직무헌신과 직무활력을 증진시켰으며, 표면행동은 냉소주의와 소진을 증가시켰다. 마지막으로 내면행동은 직무관련 긍정 정서상태와 긍정적인 직무태도(직무헌신, 직무활력) 간의 관계를, 표면행동은 직무관련 부정 정서상태와 부정적인 직무태도(냉소주의, 소진) 간의 관계를 각각 매개하였다. 본 연구는 종업원들의 감정노동전략이 인지적 혹은 반응적 메커니즘을 수반하여 직무관련 정서상태와 직무태도 간의 관계를 매개함을 검증하였다는 점에서 이론적 의의가 있다. 또한 실무적으로 본 연구 결과를 토대로 볼 때, 서비스 직무를 수행하는 종업원들의 서비스 질을 향상시키고 긍정적인 직무태도를 유도하기 위해서는 단순히 부정적 정서를 유발하지 않는 직무환경을 유지하는 수동적 관리보다도 긍정적 정서를 증진시킬 수 있는 과업환경을 조성하는 것이 중요함을 제안할 수 있다. 향후 연구에서는 종단적 데이터 측정이나 측정 소스의 다양화 등의 시도가 필요하다.